Vacuum Main Roller Side Brush Hepa Filter Mop Cloth Compatible for Rovus Robot Vacuum Cleaner Parts Replacement

Introduction

This instruction manual provides essential information for the installation, maintenance, and care of your ConvOw replacement parts for Rovus Robot Vacuum Cleaners. These high-quality accessories are designed to ensure your robot vacuum continues to perform optimally, maintaining a clean and healthy home environment.

Product Overview

The replacement kit includes various essential components to maintain your robot vacuum's cleaning efficiency. The specific components included in your 'As Shown' package are:

• HEPA Filters
• Side Brushes
• Mop Cloths

This image displays five individual HEPA filters, essential for trapping fine dust and allergens, ensuring cleaner air output from your robot vacuum.

Shown here is a blue microfiber mop cloth, designed for wet or dry mopping to effectively clean hard floor surfaces.

This image features two side brushes, crucial for sweeping debris from edges and corners into the robot vacuum's main cleaning path.

Another view of a mop cloth, this one in a light blue and white pattern, used for thorough floor cleaning.

A close-up of a single HEPA filter, highlighting its pleated design for maximum filtration efficiency.

Installation Guide

These replacement parts are designed for easy disassembly and replacement as part of your robot vacuum's daily maintenance. Always refer to your specific robot vacuum cleaner's user manual for detailed instructions on accessing and replacing components.

Replacing HEPA Filters:

1. Turn off your robot vacuum and place it on a flat surface.
2. Locate the dustbin and remove it from the robot.
3. Open the dustbin cover and carefully remove the old HEPA filter.
4. Insert the new HEPA filter into the designated slot, ensuring it fits securely.
5. Close the dustbin cover and reinsert the dustbin into the robot.

Replacing Side Brushes:

1. Turn off your robot vacuum and flip it over to access the underside.
2. Locate the side brushes. Depending on your model, they may be secured with a screw or a clip.
3. If applicable, use a screwdriver to remove the screw holding the old side brush.
4. Remove the old side brush and align the new side brush with the post.
5. Secure the new side brush with the screw or ensure it clips firmly into place.

Replacing Mop Cloths:

1. Turn off your robot vacuum.
2. Locate the mop cloth attachment or water tank module.
3. Remove the used mop cloth, which is typically attached via Velcro or a sliding mechanism.
4. Attach the new mop cloth, ensuring it is flat and securely fastened to the module.
5. Reattach the module to the robot vacuum if it was removed.

Operating Principles

These replacement parts work in conjunction with your robot vacuum to provide comprehensive cleaning:

• HEPA Filters: These filters are crucial for air purification, trapping up to 99.97% of fine particles, including dust, pet dander, and allergens, preventing them from recirculating into your home's air. They also help reduce unpleasant odors.
• Side Brushes: Designed to reach into corners and along wall edges, the side brushes sweep debris and dust into the main suction path of the robot vacuum, ensuring thorough cleaning of hard-to-reach areas.
• Mop Cloths: Used for wet or dry mopping, these cloths attach to the robot's water tank or mopping module to wipe and polish hard floors, removing fine dust and stains for a complete clean.

Maintenance and Care

Regular maintenance of your replacement parts is essential for optimal performance and longevity of your robot vacuum. Cleaning accessories should be replaced every 2-3 months, depending on usage frequency, to achieve the best cleaning and filtering effect.

• HEPA Filters: Tap the filter gently over a trash can to remove loose debris. Do not wash HEPA filters with water unless explicitly stated by your robot vacuum's manufacturer, as this can damage the filter material. Replace as recommended.
• Side Brushes: Regularly check side brushes for tangled hair or debris. Use scissors to cut away any tangled material. If bristles are bent or worn, replace the brush.
• Mop Cloths: After each use, remove the mop cloth and wash it by hand or machine with mild detergent. Allow it to air dry completely before reattaching. These cloths are reusable.

Troubleshooting

If you encounter issues after replacing parts, consider the following common scenarios:

Product Specifications

Important Notes

• The vacuum cleaner kit is made of high-quality materials, finely crafted, durable, and highly compatible with the original equipment.
• Cleaning accessories keep your home robot performing at its best. As part of daily maintenance, the attachment contents are easy to disassemble and replace.
• HEPA filters can greatly improve air quality and reduce particle size by up to 99.97%. They help remove household dust, pet dander, and other airborne particles.
• Pre-filters (part of the HEPA filter system) can help reduce unpleasant odors from pets, smoke, cooking fumes, and various household products and chemicals.

Customer Support

For any questions regarding the installation, maintenance, or compatibility of these replacement parts, please contact your retailer or the manufacturer. Ensure you have your product details and robot vacuum model information ready for efficient assistance.

For further assistance, please refer to the contact information provided with your original purchase or visit the ConvOw official support channels.