Product Overview
The Eviva Axel Wall Mount Single Sink Bath Vanity is designed for modern bathrooms, offering both style and functionality. This vanity features a durable construction and an integrated sink for a seamless look.
- Crafted with high-grade engineered wood for durability and water-resistance.
- Modern, stain-resistant, and maintenance-free acrylic top with an integrated sink.
- Equipped with high-grade stainless steel brushed nickel handles.
- Features a water-resistant white finish for lasting performance.
- Pre-drilled for a single-hole faucet (faucet not included).
Setup and Installation
This vanity unit is largely pre-assembled to simplify the installation process. Minimal assembly is required, primarily focusing on wall mounting and plumbing connections.
Safety Precautions
- Ensure proper wall mounting and secure installation to prevent the cabinet from falling and causing injury.
- Do not force doors or drawers to close to avoid pinching fingers or damaging the unit.
- Always use appropriate tools and safety gear during installation.
Installation Steps
- Unpack and Inspect: Carefully remove all components from the packaging. Inspect for any damage.
- Prepare Wall: Identify the desired mounting location. Ensure the wall can support the weight of the vanity and its contents. Locate wall studs for secure attachment.
- Mounting: Securely attach the vanity to the wall using appropriate mounting hardware (not always included, check packaging). The vanity is designed for wall-mount installation.
- Plumbing Connections: The vanity features an easy-access back panel for plumbing. Connect the water supply lines and drain to the integrated sink. Ensure all connections are watertight.
- Faucet Installation: Install your chosen single-hole faucet into the pre-drilled hole on the acrylic top. Follow the faucet manufacturer's instructions for installation.
- Final Adjustments: Ensure all drawers and doors operate smoothly.
This image displays the Eviva Axel wall mount vanity, highlighting its overall dimensions: 60 inches in width and 21.7 inches in height. The vanity features a white finish and an integrated sink.
This image illustrates the vanity's design for easy installation, featuring an open back panel that provides convenient access for plumbing connections. It also notes the pre-assembled nature of the unit.
Operating Instructions
The Eviva Axel vanity is designed for straightforward daily use.
- Drawers: The vanity features full-extension drawers with a soft-closing mechanism. Gently push the drawers to close them; they will retract smoothly and quietly.
- Doors: The cabinet doors also operate with a soft-closing feature. Close them gently to engage the mechanism.
- Sink: The integrated acrylic sink is designed for standard bathroom use. Ensure the faucet is properly installed and functioning before use.
This image demonstrates the functionality of the vanity's drawers, emphasizing their soft-closing mechanism and full-extension capability for easy access to contents.
The vanity is shown with its cabinet doors open, highlighting the integrated acrylic sink and the sleek brushed nickel handles on the drawers and doors.
Maintenance and Care
Proper care will ensure the longevity and appearance of your Eviva Axel vanity.
- Cleaning the Vanity Surface: Wipe the wood surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that can damage the finish.
- Cleaning the Acrylic Top: The acrylic top is stain-resistant and low-maintenance. Clean with mild soap and water, then wipe dry with a soft cloth. Do not use abrasive pads or cleaners containing ammonia, bleach, or solvents.
- Hardware Care: The brushed nickel handles can be cleaned with a soft, dry cloth. Avoid using chemical cleaners that may tarnish the finish.
- Spills: Wipe up spills immediately to prevent water damage, especially on wood surfaces.
A detailed view of the vanity's acrylic top, featuring an integrated sink with an overflow drain. The image also points out the natural wood veneer construction of the cabinet.
Troubleshooting
This section addresses common issues you might encounter with your vanity.
| Problem | Possible Cause | Solution |
|---|---|---|
| Drawers or doors do not close smoothly. | Obstruction in the drawer slide or hinge; misaligned hardware. | Check for any objects blocking the slides or hinges. Ensure hardware is securely fastened and aligned. Do not force closure. |
| Water leaks from plumbing connections. | Loose connections; damaged seals. | Tighten all plumbing connections. Inspect seals and replace if damaged. Consult a professional plumber if necessary. |
| Vanity feels unstable or wobbly. | Improper wall mounting; loose fasteners. | Verify that the vanity is securely attached to wall studs. Tighten all mounting fasteners. Re-evaluate installation if instability persists. |
Product Specifications
| Feature | Detail |
|---|---|
| Brand | Eviva |
| Model Name | Axel 60 White |
| Model Number | EVVN402-60WH |
| Color | White |
| Material | Engineered Wood |
| Top Material Type | Acrylic (Integrated Sink) |
| Handle Material | Nickel |
| Product Dimensions (D x W x H) | 20"D x 59"W x 21.7"H |
| Mounting Type | Wall Mount |
| Number of Drawers | 4 |
| Number of Doors | 4 |
| Assembly Required | Minimal assembly required (Pre-assembled) |
| UPC | 810069246253 |
Warranty Information
The Eviva Axel Wall Mount Single Sink Bath Vanity comes with a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use and service.
Please retain your proof of purchase for any warranty claims. The warranty does not cover damage resulting from improper installation, misuse, abuse, accident, neglect, or unauthorized repairs or modifications.
This graphic outlines the components included with the vanity (cabinet, acrylic sink) and those not included (faucet, mirror). It also confirms a 1-year warranty for the product.
Customer Support
For further assistance, technical support, or warranty inquiries, please contact Eviva customer service. Refer to your purchase documentation or the Eviva website for the most current contact information.
When contacting support, please have your model number (EVVN402-60WH) and proof of purchase readily available.
