Introduction
The LivePure LP500 Clean Heat is a versatile 3-in-1 appliance designed to enhance your indoor environment. It functions as an air purifier, a fan, and an electric heater, providing year-round comfort and improved air quality. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device.
Image: The LivePure LP500 unit in a room, illustrating its air purification capabilities, cleaning up to 400 sq ft and 28 times per day.
Image: Overview of the LivePure LP500's key functions, including powerful air purification and heating, multiple heat modes, remote control, and space-saving design.
Key Features:
- 3-in-1 Functionality: Combines an air purifier, fan, and electric heater.
- Four Fan Speed Options: Low, Medium, High, and Turbo for customized airflow and purification.
- Two Heat Modes: Provides adjustable heat settings for personal comfort.
- Remote Control: Conveniently adjust settings from a distance.
- Portable Design: Lightweight and easy to move between rooms.
- 2-Stage Filtration: Includes a Coconut Carbon Pre-Filter and a True HEPA Filter.
Important Safety Instructions
Please read all instructions carefully before using this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always plug the heater directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles when moving this heater.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Discard heater or return to authorized service facility for examination and/or repair.
- Do not use outdoors.
- To disconnect heater, turn controls to OFF, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- This heater has an automatic tip-over safety switch that shuts off the unit if it is knocked over.
- Always unplug the heater when not in use.
Setup
- Unpacking: Carefully remove the appliance from its packaging. Retain the packaging for future storage or transport.
- Placement: Place the unit on a firm, level surface. Ensure there is at least 3 feet (0.9 m) of clear space around the unit to allow for proper airflow and to prevent fire hazards. Do not place it near curtains or other combustible materials.
- Power Connection: Plug the power cord directly into a standard 120V AC electrical outlet. Do not use extension cords or power strips.
- Initial Use: For optimal air purification, ensure the filters are correctly installed before first use.
Image: Room Size Chart indicating air exchange rates per hour for different room dimensions (e.g., Bedroom, Kitchen, Living Room, Bathroom).
Operating Instructions
The LivePure LP500 can be operated using the control panel on the unit or the included remote control.
Image: Diagram of the LivePure LP500 control panel, highlighting buttons for On/Off, Fan Speed & Sleep Mode, Heating Mode, Accent Light, Timer, Rotation Mode, and Filter Indicator Light.
Control Panel and Remote Functions:
- On/Off Power: Press to turn the unit on or off.
- Fan Speed & Sleep Mode: Cycle through Low, Medium, High, and Turbo fan speeds. Press and hold for Sleep Mode, which operates at a low fan speed with reduced display brightness.
- Heating Mode: Select between Low Heat, High Heat, or Auto Heat modes. The unit will maintain a set temperature in Auto Heat mode.
- Accent Light: Turn the ambient accent light on or off.
- Timer: Set an operating timer for automatic shut-off (e.g., 1, 2, 4, 8 hours).
- Rotation Mode: Activate or deactivate the oscillation feature for wider heat/air distribution.
- Filter Indicator Light: Illuminates when it's time to check or replace the air filter.
Using the Remote Control:
The remote control provides access to all functions available on the main control panel. Ensure the remote has working batteries and is pointed towards the unit's receiver.
Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your LivePure LP500.
Filter System:
The unit utilizes a 2-stage filtration system:
Image: Diagram illustrating the two stages of filtration: Coconut Carbon Pre-Filter and True HEPA Filter, with descriptions of what each filter captures.
- Coconut Carbon Pre-Filter: Captures large particles like dust, pet dander, and pollen. It also helps reduce odors from cooking, smoking, and pets.
- H13 True HEPA Filter: Removes up to 99.97% of airborne particles as small as 0.3 microns, including smoke, dust, pollen, pet hair, dander, mold spores, and dust mites.
Filter Replacement:
- When the Filter Indicator Light illuminates, it's time to check or replace the filter.
- Unplug the unit from the power outlet.
- Locate the filter compartment (usually at the base of the unit).
- Remove the old filter. Dispose of it properly.
- Insert the new filter, ensuring it is seated correctly.
- Close the filter compartment.
- Plug the unit back in. Reset the filter indicator by pressing and holding the Filter button (if available) or following specific instructions in the full manual.
Note: Filter lifespan varies based on usage and air quality. Replace filters as needed to maintain purification efficiency.
Cleaning the Unit:
- Always unplug the unit before cleaning.
- Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Ensure no water enters the internal components.
- Clean the air intake and exhaust vents with a soft brush or vacuum cleaner attachment to remove dust buildup.
Troubleshooting
If you encounter issues with your LivePure LP500, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | Not plugged in; power outlet malfunction; tip-over switch activated. | Ensure unit is securely plugged into a working outlet. Check household breaker. Ensure unit is on a flat, stable surface. |
| No heat output. | Heat mode not selected; thermostat setting too low; safety overheat protection activated. | Select a heat mode (Low/High). Increase desired temperature. Unplug unit, wait 10 minutes, then plug back in. |
| Air purification seems ineffective. | Dirty or clogged filter; incorrect fan speed. | Check and replace the air filter if the indicator light is on. Increase fan speed. |
| Unit makes unusual noise. | Obstruction in fan; unit not on a level surface; internal component issue. | Unplug and check for obstructions. Ensure unit is on a stable surface. If noise persists, contact customer support. |
| Remote control not working. | Dead batteries; obstruction between remote and unit. | Replace remote control batteries. Ensure a clear line of sight to the unit's sensor. |
Specifications
Image: Diagram showing the dimensions of the LivePure LP500 unit: 11.1 inches wide and 28.9 inches high.
| Feature | Detail |
|---|---|
| Model Number | LP500APHTR |
| Product Dimensions | 8.38"D x 8.38"W x 24.5"H (21.3 cm D x 21.3 cm W x 62.2 cm H) |
| Item Weight | 9.4 Pounds (4.26 kg) |
| Power Source | Corded Electric (120V AC) |
| Brand | LivePure |
| Filtration Type | 2-Stage (Coconut Carbon Pre-Filter, H13 True HEPA Filter) |
| Coverage Area | Up to 400 sq ft |
Product Videos
Watch these official videos for more information on your LivePure LP500 Clean Heat Air Purifier & Electric Heater.
LivePure LP500 Overview (3:45)
Video: A comprehensive overview of the LivePure LP500 Clean Heat Air Purifier and Electric Heater, demonstrating its features and benefits.
Quick Features Guide (0:35)
Video: A short guide highlighting the key features of the LivePure LP500, including its 3-in-1 functionality and controls.
Detailed Product Walkthrough (1:29)
Video: A detailed walkthrough of the LivePure LP500, explaining its various modes and settings.
LivePure Product Demonstration (3:54)
Video: A demonstration of the LivePure LP500 in action, showcasing its air purification and heating capabilities.
Features and Benefits (2:39)
Video: An explanation of the various features and benefits of the LivePure LP500, including its filtration system and heating functions.
Product Showcase (2:27)
Video: A showcase of the LivePure LP500, highlighting its design and functionality.
Vertical Product Overview (1:19)
Video: A vertical format overview of the LivePure LP500, suitable for mobile viewing, detailing its features.
In-depth Look (2:37)
Video: An in-depth look at the LivePure LP500, covering its design, controls, and performance.
Quick Start Guide (1:04)
Video: A quick start guide for setting up and beginning to use the LivePure LP500.
Full Product Review (4:29)
Video: A comprehensive review of the LivePure LP500, covering all aspects of its performance and design.
Warranty and Support
LivePure products are designed for reliability and performance. For warranty information, product registration, or technical support, please refer to the contact information provided with your purchase or visit the official LivePure website.
It is recommended to keep your purchase receipt as proof of purchase for warranty claims.
Contact Information: Please refer to the documentation included in your product packaging or visit the LivePure Store on Amazon for support resources.
