Important Safety Information
Please read and understand all safety warnings and instructions before operating this electric snow blower. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Always use the safety switch to prevent accidental operation.
- Keep hands and other body parts away from the snow blower's rotating parts.
- Store the snow blower in a dry place when not in use.
- Wear appropriate personal protective equipment, including eye protection and non-slip footwear.
- Ensure the power cord is in good condition and avoid cutting or damaging it during operation.
Product Features
- Powerful 15 Amp Motor: Equipped with a 15A motor rotating at 3,000 RPM, capable of clearing a 20-inch width and 10-inch depth of snow, and throwing snow up to 30 feet away.
- Thoughtful LED Lights: Two integrated LED lights allow for snow removal in low-light conditions, enhancing visibility during early morning or late evening operation.
- Adjustable Directional Chute: Features a directional discharge chute with a vertical adjustable angle of 15°-60° and a horizontal adjustable angle of 0°-180°, allowing precise control over snow throwing direction and height.
- Easy Start & Secure Switch: Designed with a safety switch to prevent accidental activation. The snow blower starts quickly by pressing the safety switch button and pulling the bail lever.
- Easy Assembly & Operation: Simple assembly process with a detailed user manual. Includes two 7-inch smooth wheels and a foam-wrapped handle for easy pushing and maneuverability.
Setup and Assembly
1. Unpacking
Carefully remove all components from the packaging. Ensure all parts listed in the packing list are present and undamaged. Keep packaging materials until you are satisfied with the product.
2. Handle Assembly
Attach the upper handle to the lower handle using the provided knobs and bolts. Ensure all connections are secure.

Image: Illustration of the 3-step assembly process, highlighting how to fix the crank and attach the two handle sections using knobs.
3. Chute Attachment
Secure the discharge chute to the main unit. Refer to the detailed instructions in the included manual for proper alignment and fastening.

Image: The adjustable chute, demonstrating its 15°-60° vertical and 180° horizontal rotation capabilities.
4. Cord Management
Utilize the convenient cord retainer to hold and manage the power cord, preventing knots and ensuring it stays clear of moving parts during operation.

Image: A detailed view of the snow blower's features, including the cord holder for organized cable management.
Operating Instructions
1. Pre-Operation Checks
- Inspect the power cord for any damage.
- Ensure all fasteners are tight.
- Clear the area of any debris or objects that could be thrown by the snow blower.
2. Starting the Snow Blower
To start the unit, first press the safety switch button, then pull and hold the bail lever towards the handle. The motor will engage, and the LED lights will illuminate.

Image: Visual guide to the 2-step quick start mechanism, highlighting the safety switch and bail lever.
3. Clearing Snow
Push the snow blower forward at a steady pace. The 20-inch clearing width and 10-inch clearing depth allow for efficient snow removal from driveways, sidewalks, and decks.

Image: The IRONMAX electric snow blower in action, clearing a path through snow.

Image: Examples of wide application areas for the snow blower, such as backyards, sidewalks, and driveways.
4. Adjusting Snow Throw Direction
Use the chute adjustment lever to change the direction and height of the snow discharge as needed. This helps to avoid throwing snow onto cleared areas or neighboring properties.
Maintenance
1. After Each Use
- Disconnect the power cord.
- Clean any snow or debris from the auger and chute.
- Inspect the auger blades for wear or damage.
2. Seasonal Maintenance
- Check all electrical connections for tightness.
- Lubricate moving parts as recommended in the full manual.
- Store the snow blower in a dry, protected area.
Troubleshooting
Unit Does Not Start
- Ensure the power cord is securely plugged into a working outlet.
- Verify that the safety switch is pressed and the bail lever is fully engaged.
- Check for any obstructions in the auger that might prevent it from rotating.
Snow Not Throwing Effectively
- Check the discharge chute for blockages.
- Ensure the auger blades are not worn down.
- Adjust the speed at which you are pushing the unit.
Specifications
| Specification | Value |
|---|---|
| Brand | IRONMAX |
| Power Source | Corded Electric |
| Motor | 15 Amp |
| Rotation Speed | 3,000 RPM |
| Clearing Width | 20 inches (50 cm) |
| Clearing Depth | 10 inches (25 cm) |
| Maximum Throw Distance | 30 feet (9 meters) |
| Voltage | 120V, 60Hz |
| Item Weight | 30 lbs (13.5 kg) |
| Product Dimensions (L x W x H) | 46.5" x 20" x 38" (118cm x 51cm x 96cm) |
| Wheel Size | 7 Inches |
Warranty and Support
For warranty information, please refer to the documentation included with your product or contact IRONMAX customer support. Keep your purchase receipt as proof of purchase.
For further assistance or technical support, please visit the official IRONMAX website or contact our customer service team.