Introduction
Thank you for choosing the Trust GXT 703W Riye Gaming Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new gaming chair. Please read these instructions carefully before use and retain them for future reference.
Image: Front view of the Trust GXT 703W Riye Gaming Chair, showcasing its black and white design.
Safety Information
Important Safety Warnings:
- Do not exceed the maximum body weight of 140 kg (308 lbs). Exceeding this limit may cause damage to the chair or personal injury.
- Always ensure the chair is stable on the floor before sitting down or standing up.
- Use the throttle lever carefully to adjust the height. Avoid sudden movements.
- Keep hands and fingers clear of moving parts during adjustment.
- This chair is designed for indoor use only.
- Keep away from open flames and direct heat sources.
- Regularly check all bolts and screws to ensure they are tight. Retighten if necessary.
Package Contents
Before beginning assembly, please verify that all components are present and undamaged. If any parts are missing or damaged, contact customer support.
Image: The packaging box for the Trust GXT 703W Riye Gaming Chair, showing the chair's design and branding.
- Backrest
- Seat Base
- Armrests (2x)
- Gas Lift Cylinder
- Star Base
- Casters (5x)
- Mechanism Plate
- Hardware Kit (screws, washers, Allen key)
- Instruction Manual (this document)
Setup and Assembly
Follow these steps to assemble your Trust GXT 703W Riye Gaming Chair. It is recommended to assemble the chair on a soft, clean surface to prevent damage.
- Attach Casters to Star Base: Insert each of the five casters into the holes at the end of the star base until they click securely into place.
- Insert Gas Lift: Place the gas lift cylinder into the center hole of the assembled star base.
- Attach Mechanism Plate to Seat Base: Align the mechanism plate with the pre-drilled holes on the underside of the seat base. Ensure the front of the mechanism plate faces the front of the seat. Secure with screws and washers using the provided Allen key.
- Attach Armrests to Seat Base: Secure the armrests to the sides of the seat base using the designated screws. Ensure they are firmly attached.
- Attach Backrest to Seat Base: Align the backrest with the mounting brackets on the seat base. Secure with screws.
- Connect Seat Assembly to Gas Lift: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring the tapered end of the gas lift fits securely into the mechanism plate.
Image: Front three-quarter view of the assembled Trust GXT 703W Riye Gaming Chair, showcasing its black and white design and armrests.
Operating Instructions
Your Trust GXT 703W Riye Gaming Chair offers several adjustable features for optimal comfort.
- Height Adjustment: To adjust the chair's height, pull the lever located under the right side of the seat upwards.
- To raise the chair: Lift the lever while taking your weight off the seat.
- To lower the chair: Lift the lever while remaining seated.
- Backrest Recline: The backrest can be reclined to various angles. Locate the recline lever on the side of the chair (typically the right side). Pull the lever up to unlock the recline mechanism, adjust to your desired angle, and release the lever to lock it in place.
- Armrest Adjustment: The armrests are designed to flip up, allowing for easier access or storage under a desk. Lift the armrests upwards until they lock into the vertical position. To lower them, pull them down.
Image: Side view of the Trust GXT 703W Riye Gaming Chair, illustrating the recline function of the backrest.
Image: Side view of the Trust GXT 703W Riye Gaming Chair with its armrests flipped up, demonstrating their adjustable feature.
Maintenance
Proper care and maintenance will extend the life of your gaming chair.
- Cleaning: Wipe clean with a damp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the material.
- Inspection: Periodically check all screws and bolts for tightness. Retighten as needed to ensure stability and safety.
- Moving the Chair: When moving the chair, lift it rather than dragging it to prevent damage to the base or floor.
Troubleshooting
If you encounter issues with your chair, refer to the following common solutions:
- Chair Sinks or Does Not Hold Height:
- Ensure the height adjustment lever is fully engaged.
- The gas lift cylinder may be faulty. Contact customer support for replacement.
- Chair Wobbles or is Unstable:
- Check all assembly screws and bolts, especially those connecting the seat, backrest, and mechanism plate. Tighten any loose fasteners.
- Ensure casters are fully inserted into the star base.
- Casters Not Rolling Smoothly:
- Check for debris (hair, lint) caught in the caster wheels and remove them.
- Ensure casters are properly installed.
Specifications
| Brand | Trust |
| Model Name | Trust GXT 703W |
| Item Model Number | 25130 |
| Color | Black/White |
| Maximum Weight Recommendation | 140 Kilograms (308 lbs) |
| Material | Foam (Fill Material) |
| Special Feature | Ergonomic, Recliner |
| Arm Style | Armless (with flip-up armrests) |
| Product Dimensions | 2.76 x 2.76 x 47.24 inches (Note: These dimensions may refer to packaging or a component, not the full assembled chair.) |
| Item Weight | 33.1 pounds |
| Assembly Required | Yes |
| Product Care Instructions | Wipe Clean |
Warranty and Support
Your Trust GXT 703W Riye Gaming Chair is covered by a manufacturer guarantee. For specific warranty terms, duration, and to initiate a warranty claim, please refer to the official Trust website or contact their customer support directly.
For further assistance, technical support, or to inquire about replacement parts, please visit the Trust Store on Amazon or the official Trust Gaming website.
