Montech KING95B
Montech King 95 Dual-Chamber ATX Mid-Tower PC Gaming Case
Model: KING95B
Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Montech King 95 Dual-Chamber ATX Mid-Tower PC Gaming Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance.
Figure 1: Montech King 95 PC Gaming Case with its distinctive curved tempered glass panel.
Setup and Installation
1. Unboxing and Inspection
Carefully remove the case from its packaging. Inspect for any damage that may have occurred during shipping. Verify all accessories are present according to the packing list.
Figure 2: Exploded view illustrating the removable panels and internal structure of the King 95 case.
2. Panel Removal
The Montech King 95 features quick-release glass panels for easy access. Gently pull the tempered glass side panel and front panel to detach them. The top mesh panel can also be removed for radiator installation.
3. Motherboard Installation
Align your ATX, Micro ATX, or Mini ITX motherboard with the standoffs inside the case. Secure the motherboard using the provided screws. Ensure proper alignment with the rear I/O shield.
4. Storage Device Installation
The King 95 supports multiple storage configurations. Install up to 8 hard drives (HDDs) and solid-state drives (SSDs) in the designated bays. The dual-chamber design provides ample space for drive mounting.
Video 1: This video demonstrates the exceptional compatibility of the King 95 case, showcasing the installation of HDDs, SSDs, and large graphics cards within its dual-chamber design.
5. Graphics Card (GPU) Installation
The dual-chamber design accommodates even the largest 40 series graphics cards. Insert your GPU into the appropriate PCIe slot on the motherboard and secure it with the retention mechanism or screws.
6. Power Supply Unit (PSU) Installation
The case supports dual power supply units. Install your PSU(s) in the dedicated compartment, typically located in the rear chamber, and secure it with screws.
7. Cooling System Installation
The King 95 offers versatile cooling options. It supports a 360mm top radiator, a 280mm side radiator (up to 60mm thickness) without interference, and up to 175mm air cooler height. The patented adjustable side fan bracket can be rotated for improved airflow.
Figure 3: Illustration detailing the extensive fan and radiator support within the King 95 case, highlighting various mounting points and sizes.
8. Cable Management
Utilize the over 35mm of cable management space in the rear chamber to route and secure cables. This ensures optimal airflow and a clean interior aesthetic.
Operating Instructions
1. Front Panel I/O
The front panel provides convenient access to essential ports and controls:
- Power Button: To turn the system on or off.
- LED Button: To cycle through ARGB lighting modes (if applicable).
- Audio Jacks: For headphones and microphone.
- USB 3.0 Ports: For high-speed data transfer.
- Type-C Port: For modern USB-C connectivity.
Figure 4: Detailed view of the front panel input/output ports and controls on the King 95 case.
2. Airflow Modes
The King 95 offers two primary airflow configurations:
- Elegant Glass Mode: Achieves efficient case cooling with side and bottom air intake, seamlessly blending function and aesthetics. This mode utilizes the curved tempered glass panel.
- Turbo Mesh Mode: For maximum cooling performance, replace the glass front panel with the included mesh panel. This mode utilizes a 3-directional cooling approach, efficiently drawing air from the front, side, and bottom while expelling heat through the top and rear.
Figure 5: Visual comparison of the Elegant Glass Mode and Turbo Mesh Mode, demonstrating their distinct airflow patterns and aesthetic differences.
Video 2: Official video showcasing the key features of the Montech King 95 case, including its design, panel removal, and airflow capabilities.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your PC case.
1. Dust Filter Cleaning
The King 95 is equipped with magnetic dust filters on the top, bottom, and side panels. Periodically remove these filters and clean them with compressed air or a soft brush to prevent dust buildup and maintain airflow.
2. Exterior Cleaning
Wipe the exterior surfaces, including the tempered glass panels, with a soft, damp cloth. Avoid abrasive cleaners that could scratch the finish or glass.
3. Internal Dust Removal
Every few months, open the case and use compressed air to remove dust from internal components, especially fans and heatsinks, to ensure efficient cooling.
Troubleshooting
If you encounter issues with your Montech King 95 case, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| System not powering on. | Front panel power switch not connected correctly. PSU not receiving power. | Check front panel header connections to the motherboard. Ensure PSU is switched on and connected to a power source. |
| Poor airflow or high temperatures. | Dust buildup on filters/fans. Incorrect fan orientation. Glass panel used in high-performance setup. | Clean dust filters and internal components. Ensure fans are oriented for optimal intake/exhaust. Consider switching to Turbo Mesh Mode for better airflow. |
| Front panel USB/Audio ports not working. | Front panel cables not connected to motherboard. | Verify USB and audio header connections on the motherboard. Refer to your motherboard manual for correct pinouts. |
| ARGB lighting not functioning. | ARGB cable not connected to motherboard or controller. Software issue. | Ensure ARGB cable is securely connected to a compatible 3-pin 5V ARGB header on the motherboard or an external controller. Check motherboard RGB software settings. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | KING 95 |
| Case Type | Mid Tower |
| Dimensions (LxWxH) | 15.5 x 20.5 x 22.5 inches |
| Weight | 26.4 pounds |
| Material | Tempered Glass, Steel |
| Motherboard Compatibility | Mini ITX, Micro ATX, ATX |
| USB 3.0 Ports | 2 |
| USB Type-C Port | 1 |
| Cooling Method | Water, Air |
| Max CPU Cooler Height | 175mm |
| Radiator Support (Top) | Up to 360mm |
| Radiator Support (Side) | Up to 280mm (60mm thickness) |
| Drive Bays | Supports up to 8 drives (HDD/SSD combinations) |
| Cable Management Space | Over 35mm |
Warranty and Support
Montech products are designed and manufactured to the highest quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Montech website.
If you require technical assistance or have questions regarding your Montech King 95 case, please contact Montech customer support through their official channels. You may find contact information on the Montech website or on your product packaging.
Online Resources:
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.