1. Introduction
Thank you for choosing the Minthouz 17000Pa Handheld Vacuum Cleaner. This manual provides essential information for the safe and efficient use of your new device. Please read these instructions carefully before operation and retain them for future reference.
2. Safety Information
- Read all instructions before using the appliance.
- Do not use the vacuum cleaner near water or in wet conditions.
- Keep the appliance away from children and pets.
- Do not vacuum flammable or combustible materials, hot ashes, or sharp objects.
- Use only the provided charging cable and a recommended 5V/2A adapter (not included).
- Do not operate the vacuum if it is damaged or malfunctioning.
- Ensure filters are properly installed before use.
- Avoid blocking the air inlets or outlets during operation.
3. Package Contents
Verify that all items are present in your package:
- 1 x Minthouz Handheld Vacuum Cleaner (Model MT-L011)
- 1 x Brush Nozzle attachment
- 1 x Long Flat Nozzle attachment
- 1 x Inflatable Tube attachment
- 1 x Type-C Charging Cable
- 1 x Extra HEPA Filter
- 1 x Storage Bag
- 1 x Quick Start Guide

Image 1: Minthouz Handheld Vacuum Cleaner with included accessories. Shows the main unit, various nozzles, charging cable, and storage bag.
4. Product Overview
Familiarize yourself with the components of your Minthouz Handheld Vacuum Cleaner:

Image 2: Detailed diagram illustrating the main components of the vacuum cleaner, including the Power/LED Button, Dust Cup Buckle, Stainless Steel Filter, HEPA Filter, 210ml Dust Cup, Type-C Port, and Lightning/SOS Light.
- Power/LED Button: Controls power and LED/SOS light modes.
- Dust Cup Buckle: Releases the dust cup for emptying.
- Stainless Steel Filter: Primary filter to block larger particles.
- HEPA Filter: Secondary filter to capture fine dust particles.
- 210ml Dust Cup: Transparent container for collected debris.
- Type-C Port: For charging the internal battery.
- Lightning/SOS Light: Integrated LED light for illumination and emergency signaling.
5. Setup
5.1 Initial Charging
Before first use, fully charge the vacuum cleaner. Connect the Type-C charging cable to the vacuum's Type-C port and the other end to a 5V/2A USB power adapter (not included) or a compatible USB port. The charging indicator will illuminate. A full charge typically takes approximately 4 hours.

Image 3: The handheld vacuum connected to a power adapter via a Type-C cable, illustrating the charging process. The image indicates a 4-hour full charge time and a 3*2500mAh battery.
5.2 Attaching Nozzles
Select the appropriate nozzle for your cleaning task and firmly attach it to the vacuum's suction inlet. Ensure it is securely fitted to prevent loss of suction.
6. Operation
6.1 Power On/Off and Suction Modes
Press the Power/LED Button once to turn on the vacuum in low suction mode (10KPa). Press it again to switch to high suction mode (17KPa). Press a third time to turn the vacuum off.

Image 4: Visual representation of the vacuum's two suction speeds, indicating 10KPa for low (hair, dust) and 17KPa for high (sand, grain) cleaning tasks.
6.2 Using Attachments
- Brush Nozzle: Ideal for cleaning irregular surfaces like car air conditioners, carpets, or upholstery.

Image 5: The vacuum cleaner equipped with the brush nozzle, effectively cleaning a carpet surface.
- Long Flat Nozzle: Designed for reaching narrow gaps, corners of car interiors, or between sofa cushions.

Image 6: The vacuum cleaner utilizing the long flat nozzle to access and clean tight spaces within a car's interior.
- Inflatable Tube: Can be attached to the exhaust port to function as a blower, useful for keyboards or blowing concealed dust out.

Image 7: The vacuum cleaner configured with the inflatable tube, demonstrating its use as a blower to clean a computer keyboard.
6.3 LED/SOS Light Function
The vacuum features an integrated LED light. Press and hold the Power/LED Button for approximately 2 seconds to activate the white LED light for illumination. Press and hold again to switch to the red SOS flashing light for emergency situations. Press and hold a third time to turn off the light.

Image 8: Depicts the vacuum cleaner's dual functionality as a white LED light for general illumination and a red SOS light for emergency signaling, useful in various scenarios like car maintenance or roadside assistance.
7. Maintenance
7.1 Emptying the Dust Cup
To maintain optimal suction and prevent overflow, empty the dust cup regularly. Press the Dust Cup Buckle to release the dust cup, then invert it over a trash receptacle to empty. The one-click design helps avoid direct contact with debris.

Image 9: Illustration of the one-click dust cup emptying mechanism, showing how to release and dispose of collected debris without direct hand contact.
7.2 Cleaning the Filters
The Minthouz Handheld Vacuum features a washable double-layer filter system consisting of a stainless steel filter and a HEPA filter. Regular cleaning is crucial for maintaining performance.
- Rotate to remove the dust cup from the main unit.
- Pull out the entire filter system from the dust cup.
- Detach the stainless steel filter from the HEPA filter.
- Wash both filters under running water. Ensure all debris is removed.
- Allow both filters to air dry completely before reassembling and placing them back into the vacuum. Do not use the vacuum with wet filters.

Image 10: Step-by-step guide on how to disassemble, wash, and air dry the stainless steel and HEPA filters for proper maintenance.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vacuum does not turn on. | Battery is depleted. | Charge the vacuum cleaner fully. |
| Low suction power. | Dust cup is full or filters are clogged. | Empty the dust cup and clean the filters. Ensure filters are dry before reinstallation. |
| Low suction power. | Nozzle or suction inlet is blocked. | Check and clear any obstructions from the nozzle or suction path. |
| Vacuum overheats during use. | Prolonged use or blocked airflow. | Turn off the vacuum and allow it to cool down. Ensure air vents are not blocked. Avoid continuous operation for extended periods. |
| Charging indicator not working. | Charging cable or adapter issue. | Ensure the Type-C cable is securely connected. Try a different 5V/2A USB adapter. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Minthouz |
| Model Name | MT-L011 (L011G-2) |
| Suction Power | Up to 17000 Pa |
| Wattage | 120 Watts |
| Battery Capacity | 3 x 2500mAh (Lithium-Ion) |
| Charging Time | Approx. 4 Hours |
| Runtime | 18-35 minutes (depending on mode) |
| Noise Level | <75 dB |
| Filter Type | HEPA Filter, Stainless Steel Filter |
| Dust Cup Capacity | 210 ml |
| Product Dimensions | 2.2"L x 2.2"W x 11.92"H |
| Item Weight | 1.08 pounds |
| Special Features | Compact, Portable, Washable Filter, LED/SOS Light |
10. Warranty and Support
Minthouz is committed to providing high-quality products and customer satisfaction. If you encounter any issues or have questions regarding your Minthouz Handheld Vacuum Cleaner, please contact our customer service team. We aim to assist you within 24 hours and offer lifelong friendly customer service.
For support, please visit the official Minthouz website or contact the seller directly through your purchase platform.
Please retain your proof of purchase for warranty claims.