HOMCOM CL-30V220-1

Download PDF
Contents

HOMCOM 6ft Tall Prelit Artificial Christmas Tree Instruction Manual

Model: CL-30V220-1

Brand: HOMCOM

Important Safety Information

  • Read all instructions carefully before assembly and use.
  • Keep away from open flames or heat sources.
  • Ensure all electrical connections are secure before plugging in.
  • Do not overload electrical outlets.
  • This product is for indoor use only.
  • Keep out of reach of children and pets.
  • The tree features flame-retardant materials for added safety.

Package Contents

Your HOMCOM 6ft Tall Prelit Artificial Christmas Tree package includes the following components:

  • Tree sections (labeled for easy assembly)
  • Metal stand
  • Bolts for securing the tree to the stand
  • Extra LED bulbs and fuses
  • Disposable brown paper underskirt (for setup)

Setup Instructions

Follow these steps to assemble your artificial Christmas tree:

  1. Prepare the Area: Place the provided disposable brown paper underskirt on the floor where you intend to set up the tree. This will help catch any snow flocking that may shed during assembly.
  2. Assemble the Stand: Unfold the metal stand and ensure it is stable. Insert the bolts to secure the tree sections.
  3. Insert Tree Section 3 (Bottom): Carefully insert the bottom section of the tree (labeled '3') into the stand. Ensure it is firmly seated.
  4. Insert Tree Section 2 (Middle): Place the middle section (labeled '2') onto Section 3. Connect the light strands between these two sections.
  5. Insert Tree Section 1 (Top): Place the top section (labeled '1') onto Section 2. Connect the light strands.
  6. Fluff the Branches: Gently pull down and spread out each individual branch tip to create a full, realistic appearance. This process may take 30-45 minutes. The branches feature an auto-open design, allowing them to drop automatically with gravity.
  7. Plug in the Lights: Locate the main power plug and connect it to a suitable electrical outlet.
Image showing the three sections of the HOMCOM 6ft Artificial Christmas Tree and hinge construction for easy assembly.

Figure 1: The tree comes in three sections (labeled 1, 2, 3) for easy assembly. The branches are pre-attached with hinge construction, allowing them to drop automatically.

Diagram illustrating how to fluff individual branch tips for a fuller tree appearance.

Figure 2: To achieve a full and lush appearance, spread out all individual branch tips as shown in the diagram. This process typically takes 30-45 minutes.

Operating Instructions

Your HOMCOM Artificial Christmas Tree comes pre-lit with warm white LED lights for immediate enjoyment.

  • Powering On/Off: Once assembled and plugged into an electrical outlet, the tree lights will illuminate. To turn the lights off, simply unplug the tree from the outlet.
  • Light Type: The tree features 220 warm white LED lights, providing a cozy and festive glow.
Image showing the HOMCOM 6ft Artificial Christmas Tree both unlighted and lighted, highlighting the 220 LED lights.

Figure 3: The pre-lit design of the tree features 220 warm white LED lights, which illuminate the snow-flocked branches to create a festive atmosphere.

Maintenance

Proper care and maintenance will ensure your Christmas tree remains beautiful for many seasons.

  • Fluffing: Periodically re-fluff branches as needed to maintain a full appearance.
  • Cleaning: Dust the tree gently with a soft, dry cloth. Avoid using liquid cleaners.
  • Storage: When storing, carefully disassemble the tree in reverse order of assembly. Store the sections in the original slim cardboard box in a cool, dry place away from direct sunlight.

Troubleshooting

If you encounter any issues with your tree, refer to the following common solutions:

  • Lights Not Working:
    • Ensure all sections are properly connected and plugged into a working electrical outlet.
    • Check for any loose bulbs. Replace any burnt-out bulbs with the provided extra bulbs.
    • Inspect the fuse in the plug. Replace it with an extra fuse if necessary.
  • Excessive Snow Shedding: Some shedding of the snow flocking is normal, especially during initial setup and fluffing. Use a vacuum cleaner to clean up any fallen flocking. Once set up, shedding should minimize.
  • Branches Not Full: Ensure all individual branch tips are fully fluffed and spread out. Allow some time for the branches to settle and expand after assembly.

Specifications

FeatureDetail
BrandHOMCOM
Model NumberCL-30V220-1
Overall Dimensions (including base)Dia. 38.5" x 70.75" H (approx. 6ft tall)
Branch Count638
Tree TypeFlocked Artificial Christmas Tree
Light TypeLED
Light Count220
Light ColorWarm White
MaterialPlastic
Item Weight13.2 Pounds
Special FeaturePrelit, Snow Flocked, Auto-Open Branches, Flame-Retardant
Recommended UsesIndoor
Included ComponentsStand

Warranty and Support

For warranty information or customer support, please refer to the product packaging or contact HOMCOM customer service directly. Keep your purchase receipt for any warranty claims.

© 2023 HOMCOM. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.