Kikkaboo Amaris

Download PDF
Contents

Kikkaboo Amaris Co-Sleeper Instruction Manual

Model: Amaris | Brand: Kikkaboo

1. Introduction

Thank you for choosing the Kikkaboo Amaris Co-Sleeper. This manual provides essential information for the safe assembly, operation, and maintenance of your co-sleeper. Please read all instructions carefully before use and keep this manual for future reference.

The Kikkaboo Amaris Co-Sleeper is designed to allow your baby to sleep safely next to you. It features a lightweight aluminum frame, adjustable height, an anti-reflux position, and wheels for easy mobility. It can be used as a standalone crib or attached to an adult bed.

Kikkaboo Amaris Co-Sleeper in dark grey, shown fully assembled with mesh side panel visible.

Figure 1.1: Kikkaboo Amaris Co-Sleeper, fully assembled.

2. Safety Information

WARNING: Failure to follow these warnings and instructions could result in serious injury or death.

  • Always ensure the co-sleeper is placed on a firm, horizontal level floor.
  • Do not use the co-sleeper if any parts are broken, torn, or missing. Contact Kikkaboo for replacement parts.
  • This co-sleeper is suitable for infants from birth up to 6 months, or a maximum weight of 9 kg (20 lbs).
  • Do not use this co-sleeper for children who can sit up, kneel, or stand unassisted.
  • When used as a co-sleeper, always secure it to the adult bed using the provided attachment straps. Ensure there is no gap between the co-sleeper and the adult mattress.
  • The co-sleeper is designed for adult beds with a mattress height between 69 cm and 82 cm (bottom to top of mattress). Verify compatibility with your bed before use.
  • Never leave your child unattended in the co-sleeper with the side lowered when not attached to the adult bed.
  • Only use the mattress provided by the manufacturer. Do not add a second mattress, as this can create a suffocation hazard.
  • Keep all small parts and packaging materials away from children.
  • Regularly check all fasteners and connections to ensure they are secure.

3. Package Contents

Please check that all components are present before assembly:

  • Kikkaboo Amaris Co-Sleeper Frame
  • Soft Mattress Topper
  • Attachment Straps for Adult Bed
  • Mosquito Net (if included in your model)
  • Instruction Manual
Kikkaboo Amaris Co-Sleeper with an attached mosquito net.

Figure 3.1: Co-sleeper shown with optional mosquito net.

4. Setup and Assembly

Assembly of the Kikkaboo Amaris Co-Sleeper is designed to be straightforward. Follow the steps below, referring to the diagrams in the manual for visual guidance.

  1. Unpack Components: Carefully remove all parts from the packaging.
  2. Assemble Frame: Connect the frame components as indicated in the included diagrams. Ensure all locking mechanisms click into place securely. The frame is made of high-quality, lightweight aluminum with a wood coating.
  3. Install Mattress: Place the soft mattress topper firmly into the base of the co-sleeper.
  4. Attach Mosquito Net (Optional): If your model includes a mosquito net, attach it according to the specific instructions provided with the net.
Kikkaboo Amaris Co-Sleeper from a side angle, showing the adjustable height mechanism.

Figure 4.1: Side view of the co-sleeper, highlighting the frame and height adjustment points.

5. Operating Instructions

5.1 Height Adjustment

The co-sleeper offers 6 height adjustment positions to match the height of your adult bed. To adjust the height:

  1. Locate the height adjustment buttons on both sides of the co-sleeper frame.
  2. Press the buttons simultaneously and raise or lower the co-sleeper to the desired height.
  3. Ensure both sides are adjusted to the same height and click securely into place before placing your baby inside.

5.2 Anti-Reflux Positioning

For babies experiencing reflux, the co-sleeper can be tilted to an anti-reflux position. This is achieved by setting one side of the co-sleeper slightly higher than the other.

  1. Adjust one side of the co-sleeper to a higher position than the other side (e.g., one side at position 4, the other at position 3).
  2. Ensure the tilt is gentle and safe for your baby. Do not exceed a one-level difference between the two sides.
  3. Always monitor your baby when using the anti-reflux position.
Kikkaboo Amaris Co-Sleeper shown in a tilted anti-reflux position.

Figure 5.1: Co-sleeper demonstrating the anti-reflux tilt feature.

5.3 Lowerable Front Side (Co-Sleeper Mode)

The front side of the co-sleeper can be lowered to allow easy access to your baby when attached to an adult bed.

  1. To lower the side, locate the release mechanisms on both sides of the fabric panel.
  2. Press the releases and gently slide the fabric panel downwards.
  3. To raise the side, simply pull the fabric panel upwards until it locks securely into place.
  4. Important: When the co-sleeper is not attached to the adult bed, always ensure the front side is in the raised and locked position to prevent falls.
Kikkaboo Amaris Co-Sleeper with the front side panel lowered, revealing the mesh window.

Figure 5.2: Co-sleeper with the front side lowered for co-sleeping access.

5.4 Attaching to Adult Bed

To use the Amaris as a co-sleeper, it must be securely attached to your adult bed using the provided straps.

  1. Position the co-sleeper next to your adult bed.
  2. Adjust the co-sleeper's height so that its mattress is level with or slightly below your adult mattress.
  3. Lower the front side of the co-sleeper.
  4. Thread the attachment straps through the designated loops on the co-sleeper frame and around the frame of your adult bed.
  5. Tighten the straps firmly to eliminate any gap between the co-sleeper and the adult mattress. The co-sleeper should not be able to move away from the adult bed.
  6. Regularly check the tightness of the straps.

5.5 Mobility (Using Wheels)

The Kikkaboo Amaris Co-Sleeper is equipped with four wheels for easy movement between rooms.

  • To move the co-sleeper, ensure the wheels are unlocked.
  • Gently push or pull the co-sleeper to its desired location.
  • Once in position, engage the wheel locks to prevent accidental movement.

6. Maintenance and Care

Proper care will extend the life of your Kikkaboo Amaris Co-Sleeper.

  • Fabric Components: The fabric parts of the co-sleeper should be hand washed only. Do not machine wash, bleach, tumble dry, or iron.
  • Frame: Wipe the frame clean with a damp cloth and mild soap. Dry thoroughly.
  • Mattress: The mattress topper can be spot cleaned with a damp cloth. Ensure it is completely dry before re-inserting.
  • Storage: When not in use, store the co-sleeper in a clean, dry place, away from direct sunlight and extreme temperatures.

7. Troubleshooting

If you encounter any issues with your Kikkaboo Amaris Co-Sleeper, please refer to the following common solutions:

  • Co-sleeper feels unstable: Ensure all frame connections are securely locked and the height adjustment mechanisms are fully engaged on both sides. Check that the attachment straps to the adult bed are tightened.
  • Height adjustment is difficult: Ensure both release buttons are pressed simultaneously and there is no obstruction.
  • Side panel does not lower/raise smoothly: Check for any fabric obstructions or debris in the sliding mechanism. Ensure release buttons are fully pressed.
  • Wheels not moving freely: Check for debris caught in the wheels. Ensure wheel locks are disengaged.

If problems persist, please contact Kikkaboo customer support.

8. Specifications

FeatureDetail
Model NameAmaris
BrandKikkaboo
Model Number31003020096
ColorDark Grey
Product Dimensions (L x W x H)88.5 x 56 x 69 - 82 cm (approx. 89 x 56 x 82 cm as per specifications)
Mattress Topper Dimensions (L x W x H)81 x 49 x 2 cm
Product Weight7.7 kg
MaterialAluminum, Polyester
Age SuitabilityFrom birth up to 6 months
Maximum Weight Capacity9 kg (20 lbs)
Height Adjustment6 positions
Compatible Adult Bed Height69 - 82 cm (bottom to top of mattress)
Special FeaturesAnti-reflux positioning, lowerable front side, 4 wheels, ventilation panels

9. Warranty and Support

Kikkaboo products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Kikkaboo website.

For technical support, replacement parts, or any questions not covered in this manual, please contact Kikkaboo customer service through their official channels. Please have your model number (31003020096) and purchase details ready when contacting support.

© Kikkaboo. All rights reserved. Information in this manual is subject to change without notice.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.