1. Product Overview
The Pixelman PAHD-2A is an advanced AHD (Analog High Definition) backup camera designed to provide a clear and wide view behind your vehicle. Engineered for durability and performance, it features a robust stainless steel bracket, IP69K waterproof rating, and enhanced imaging capabilities for various driving conditions.
Key Features:
- AHD Technology: Delivers high-definition video output for superior clarity.
- 145-Degree Viewing Angle: Provides a wide field of view to minimize blind spots without significant distortion.
- IP69K Waterproof Rating: Designed to withstand high-pressure water jets and harsh weather conditions, preventing water ingress.
- Stainless Steel Bracket: Ensures long-term durability and corrosion resistance, even in challenging environments.
- Enhanced Night Vision: Utilizes a 1/2.7-inch 3D noise reduction chip and large aperture lens for clear images in low-light conditions.
- High Transmission Glass Lens: Offers 99% light transmittance and resistance to high temperatures and scratches.
Image 1.1: The Pixelman PAHD-2A AHD Backup Camera, showing the camera unit, license plate bracket, and RCA video connector.
2. Package Contents
Please verify that all items are present in the package before proceeding with installation:
Image 2.1: All components included in the Pixelman PAHD-2A backup camera package.
- Pixelman PAHD-2A Backup Camera Unit
- Stainless Steel License Plate Bracket
- Mounting Screws and Anti-friction Rubber Gaskets
- Screwdriver
- 8-meter RCA Video Cable
- Power Cable
- Cable Ties
- User Manual
3. Setup and Installation
Follow these steps for proper installation of your Pixelman AHD Backup Camera.
3.1 Mounting the Camera
The camera can be mounted using the provided stainless steel license plate bracket. The bracket is designed to fit behind your vehicle's license plate.
- Position the stainless steel bracket behind your vehicle's license plate.
- Secure the bracket and license plate using the provided stainless steel screws and anti-friction rubber gaskets. The elongated mounting holes allow for adjustment.
- Adjust the camera angle as needed for optimal rear view.
Image 3.1: Illustration of the stainless steel movable bracket for license plate installation.
3.2 Wiring Connections
The camera connects to your vehicle's display unit (monitor, car radio, DVD player) via an RCA connector and receives power from the vehicle's reverse lights.
- Connect the yellow RCA video cable from the camera to the video input (usually labeled 'CAM IN' or 'REVERSE IN') on your display unit.
- Connect the red wire of the camera's power cable to the positive (+) wire of your vehicle's reverse light circuit.
- Connect the black wire of the camera's power cable to a suitable ground point on your vehicle's chassis.
- Ensure all connections are secure and insulated to prevent short circuits.
Image 3.2: Wiring diagram for connecting the camera's video and power cables.
3.3 Compatibility Note
This camera is equipped with an RCA connector and is compatible with car original screens or aftermarket monitors that have an RCA video input. It is not suitable for direct connection to dash cams, mirror cams, or GPS units without an RCA video input.
Image 3.3: Compatibility information for the RCA video connector.
4. Operating Instructions
Once installed, the Pixelman PAHD-2A backup camera operates automatically when your vehicle is put into reverse gear, displaying the rear view on your connected monitor.
4.1 Display Mode Switching
The camera features adjustable settings for video format (HD/AHD) and parking guidelines. These settings are controlled by cutting specific wire loops on the camera's cable:
- HD/AHD Signal: To switch between HD and AHD video formats, locate the designated wire loop (refer to the specific wire color in your camera's cable, as this may vary). Cutting this wire will change the video output format.
- Parking Guidelines: To enable or disable the parking guidelines overlay on the video feed, locate and cut the corresponding wire loop.
Image 4.1: Wire loop options for video format and parking guideline control.
5. Maintenance
To ensure the longevity and optimal performance of your Pixelman AHD Backup Camera, follow these simple maintenance guidelines:
- Lens Cleaning: Regularly clean the camera lens with a soft, damp cloth to remove dirt, dust, or water spots that may obstruct the view. Avoid abrasive cleaners.
- Bracket Inspection: Periodically check the stainless steel mounting bracket and screws for tightness and signs of wear. Although stainless steel is corrosion-resistant, extreme conditions may still affect it over time.
- Cable Integrity: Inspect the RCA and power cables for any signs of damage, fraying, or loose connections. Secure any loose cables to prevent accidental damage.
- Waterproof Design: The IP69K rating ensures resistance to high-pressure water. However, avoid directing high-pressure water jets directly at the camera for extended periods during car washes.
Image 5.1: The camera's IP69K waterproof design ensures durability against harsh weather and car washes.
6. Troubleshooting
If you encounter issues with your Pixelman AHD Backup Camera, refer to the following common problems and solutions:
- No Signal/Black Screen:
- Check all cable connections, ensuring the RCA video cable is securely plugged into both the camera and the monitor.
- Verify that the camera's power cable is correctly connected to the reverse light circuit and a good ground.
- Ensure your monitor is set to the correct video input channel.
- Distorted or Unclear Image:
- Clean the camera lens thoroughly.
- Check for any kinks or damage in the RCA video cable.
- Ensure the monitor supports AHD input if the camera is set to AHD mode. Try switching the camera's video format (by cutting the appropriate wire loop) if your monitor only supports standard definition.
- Incorrect Parking Guidelines:
- If guidelines are not appearing or are incorrect, verify the status of the guideline wire loop (cut or uncut) as per your preference.
- AHD/HD Signal Switching Issue:
- Some users have reported that the wire for AHD signal switching might be green instead of orange. If cutting the orange wire does not yield the desired result, consult the specific instructions provided with your camera or try the green wire if present.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | PAHD-2A |
| Product Dimensions | 5.9"L x 7.5"W x 0.7"H |
| Item Weight | 10.5 ounces |
| Voltage | 12 Volts |
| Real Angle of View | 145 Degrees |
| Optical Sensor Size | 1/2.7 inches |
| Connector Type | RCA |
| Installation Type | Bracket Mount |
| Waterproof Rating | IP69K |
| Lens Type | Fixed, High Transmission Glass |
| Color | Black |
| UPC | 743785316996 |
Image 7.1: The 145-degree wide viewing angle provides comprehensive coverage.
Image 7.2: The 1/2.7-inch photosensitive chip enhances brightness and contrast for clearer images.
8. Warranty and Support
For warranty information, technical support, or any inquiries regarding your Pixelman PAHD-2A AHD Backup Camera, please contact Pixelman customer service through the retailer where the product was purchased or refer to the contact information provided in your product packaging.
