1. Introduction
Thank you for choosing the GZ GUOZHI HANDHELD ARC-130 100V 130A Inverter DC Welding Machine. This compact and lightweight welding machine is designed for ease of use, making it suitable for both beginners and experienced DIY enthusiasts. Its advanced inverter technology ensures stable arc performance and high-quality welds across various applications.
This manual provides essential information for the safe and efficient operation of your welding machine. Please read it thoroughly before use and keep it for future reference.
2. Safety Information
Your safety is paramount. Always adhere to the following safety guidelines:
- Wear Protective Gear: Always wear appropriate personal protective equipment (PPE), including a welding helmet with a suitable shade, welding gloves, protective clothing, and safety shoes.
- Ventilation: Ensure adequate ventilation in your work area to disperse welding fumes.
- Fire Hazards: Keep flammable materials away from the welding area. Have a fire extinguisher readily available.
- Electrical Safety: Ensure the power supply is off before connecting or disconnecting cables. Do not use the machine in wet conditions.
- Circuit Breaker: For household outlets, a 25A circuit breaker is recommended. Using the machine with a circuit breaker rated below 25A may cause it to trip.
- Overload Protection: The machine is equipped with overheat, overcurrent, and overload protection functions to enhance safety during operation.

Image: The GZ GUOZHI HANDHELD ARC-130 welding machine highlighting its built-in safety features, including protection against overheating, overcurrent, overload, and short circuits.
3. Product Features
- Portability and Ease of Operation: The GZ GUOZHI HANDHELD ARC-130 features a distinctive design, making it compact and easy to carry. Weighing only 1.69 kg, it allows for flexible operation in various environments, including high-altitude work.
- Advanced IGBT Inverter Control: This welding machine utilizes state-of-the-art IGBT inverter control, ensuring smooth output current regulation. This results in a stable arc at both low and high currents, reduced spatter, and a clean, high-quality finish, significantly improving welding quality.
- Digital Current Display and Hot Start: The digital display shows a maximum current of 130A. The hot start function facilitates quick and easy arc ignition, simplifying operation for new users.
- Forced Air Cooling: An internal forced air cooling fan ensures efficient heat dissipation, maintaining optimal performance during extended use.
- High Duty Cycle: The machine boasts a 60% rated duty cycle, allowing for 6 minutes of continuous operation followed by a 4-minute rest period.

Image: An illustration of the GZ GUOZHI HANDHELD ARC-130 welding machine showing its internal forced air cooling fan, which provides 360-degree cooling for efficient heat dissipation.

Image: The GZ GUOZHI HANDHELD ARC-130 welding machine demonstrating its capability for long-term continuous use with a 60% duty cycle, meaning 6 minutes of use followed by 4 minutes of rest.

Image: Examples of high-quality, clean welds achieved using the IGBT inverter control of the GZ GUOZHI HANDHELD ARC-130, highlighting smooth and consistent weld beads.
4. Setup Instructions
Follow these steps to set up your GZ GUOZHI HANDHELD ARC-130 welding machine:
- Verify Power Off: Ensure the welding machine is turned off before making any connections.
- Connect Electrode Holder: Insert the connector of the electrode holder cable into the left terminal of the welding machine. Rotate it clockwise to secure it firmly.
- Connect Earth Clamp: Insert the connector of the earth clamp cable into the right terminal of the welding machine. Rotate it clockwise to secure it firmly.
- Power On: Confirm the surrounding area is safe, then turn on the power switch located at the rear of the machine. Do not use multi-tap power strips.
- Adjust Output Current: Set the appropriate output current value according to the material and welding rod size (Φ1.6 to Φ3.2).
- Attach Earth Clamp: Securely attach the earth clamp to the workpiece or workbench. Use a jig if necessary.

Image: Step-by-step connection of the electrode holder and earth clamp cables to the GZ GUOZHI HANDHELD ARC-130 welding machine, ensuring secure attachment to the designated terminals.
Setup Video Guide
5. Operating Instructions
Once the machine is set up, follow these steps for welding:
5.1. Arc Ignition Methods
There are two primary methods for igniting the arc:
- Tapping Method: Tap the welding rod against the workpiece as if striking it.
- Scratch/Match Method: Scratch the tip of the welding rod across the workpiece like striking a match.
5.2. Welding Technique
To achieve a good weld:
- Move the tip of the welding rod at a constant speed while drawing small circles along the joint.
- Maintain a consistent gap between the welding rod and the workpiece by gradually lowering your hand.
- If the finish is not clean, adjust the output current. A good weld will be smooth and consistent, while a poor weld may be uneven and have excessive spatter.
Operation Video Guide
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your welding machine:
- Cleaning: The machine features a removable fan guard, making it easy to regularly clean dust from the interior. Ensure the machine is unplugged before cleaning.
- Storage: Store the welding machine in a dry, clean environment away from direct sunlight and extreme temperatures.
- Cable Inspection: Periodically inspect all cables for any signs of damage, fraying, or wear. Replace damaged cables immediately.
7. Troubleshooting
If you encounter issues with your welding machine, consider the following common troubleshooting steps:
- No Arc/Unstable Arc: Check all cable connections for tightness. Ensure the power supply is stable and meets the machine's requirements. Verify the welding rod is dry and suitable for the material.
- Poor Weld Quality: Adjust the output current and welding speed. Ensure the workpiece is clean and free of rust or paint. Practice maintaining a consistent arc length.
- Machine Overheating: Allow the machine to cool down. Ensure the fan vents are not obstructed and the work area has good ventilation. Check for proper duty cycle adherence.
- Breaker Trips: Confirm your household outlet's circuit breaker is rated at least 25A. Reduce the output current if the breaker continues to trip.
If problems persist after following these steps, please contact customer support.
8. Specifications
| Specification | Value |
|---|---|
| Brand | GZ GUOZHI |
| Model Number | HANDHELD ARC-130 |
| Rated Input | 3.1KVA |
| Input Voltage | 100V ± 15% |
| Rated Frequency | 50Hz/60Hz |
| Power Factor | 0.73 |
| Efficiency | 85% |
| Current Adjustment Range | 20A-130A |
| Rated Duty Cycle | 60% |
| Applicable Welding Rod | Φ1.6-Φ3.2 |
| Applicable Plate Thickness | 0.8mm-5mm |
| Operating Temperature Range | -20°C~40°C |
| Dimensions (L×W×H) | 24.8 x 14.9 x 11.9 cm |
| Body Weight | 1.69 Kilograms |

Image: The GZ GUOZHI HANDHELD ARC-130 welding machine displayed alongside a table detailing its full product specifications, including input voltage, current range, and dimensions.
9. Included Accessories
The GZ GUOZHI HANDHELD ARC-130 comes with the following accessories:
- ARC-130 Welder Body
- Earth Clamp Cable (310cm)
- Storage Case

Image: The GZ GUOZHI HANDHELD ARC-130 welding machine, shown with its essential accessories: the earth clamp cable and a durable storage case for portability and protection.
10. Warranty and Support
Your GZ GUOZHI welding machine comes with a 2-year warranty from the date of purchase.
If you have any questions about the product, or if you experience any defects or malfunctions, please do not hesitate to contact us. Our customer support team is ready to assist you.