JLeisure Avenli London
JLeisure Avenli London Inflatable Hot Tub Spa User Manual
Model: Avenli London
1. Introduction
This manual provides essential information for the safe and efficient use of your JLeisure Avenli London Inflatable Hot Tub Spa. Please read all instructions carefully before setup, operation, or maintenance to ensure proper function and longevity of your product.
Image: The JLeisure Avenli London Inflatable Hot Tub Spa, showcasing its round shape and external control unit.
2. Safety Information
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
- Always supervise children in and around the hot tub.
- Do not use the hot tub if the temperature exceeds 104°F (40°C).
- Pregnant women and individuals with health conditions should consult a physician before use.
- Avoid using electrical appliances near the hot tub.
- Ensure the hot tub is placed on a flat, stable surface capable of supporting its full weight when filled.
- Do not operate the hot tub if it is damaged or malfunctioning.
3. Package Contents
Verify that all components are present before beginning assembly:
- Inflatable Hot Tub Unit
- Control Panel / Pump Unit
- Insulated Tub Cover with Double Locking Safety Clips
- Floor Protector
- Two Filtration Kits (Filter Cartridges and Filter Housings)
- Flexible Inflation Hose
- Repair Patch
- Drainage Adapter
4. Setup Instructions
Follow these steps for initial setup of your hot tub:
- Site Selection: Choose a flat, stable, and level surface free of sharp objects. Ensure adequate drainage and access to a grounded electrical outlet.
- Lay Out Floor Protector: Unfold the optional floor protector on your chosen site. This provides an additional layer of protection for the hot tub base.
Image: The optional floor protector, a dark grey circular mat, being laid out on a surface.
- Position Hot Tub: Place the folded hot tub unit on the center of the floor protector.
- Connect Inflation Hose: Attach the flexible inflation hose to the inflation port on the pump unit and the hot tub's main inflation valve.
Video: A demonstration of connecting the inflation hose to the pump unit and the hot tub, followed by the inflation process. (Relevant segment: 0:16 - 0:20, 0:45 - 0:52)
- Inflate Hot Tub: Turn on the pump's inflation function. The hot tub will begin to inflate. Ensure it is firm but not over-inflated. Do not use external air compressors.
Image: The hot tub in the process of being inflated, showing its structure taking shape.
- Connect Pump Unit: Once inflated, connect the pump unit to the hot tub's water inlet and outlet ports using the provided hoses. Ensure all connections are secure to prevent leaks.
Video: This segment demonstrates connecting the pump unit to the hot tub's water circulation ports. (Relevant segment: 1:13 - 1:20)
- Install Filter Cartridges: Open the filter housing inside the hot tub and insert the filter cartridges. Close the housing securely.
Image: A close-up view of the hot tub's filter housing with a blue filter cartridge inside, ready for installation.
Video: This segment shows the process of installing the filter cartridges into the hot tub's internal filter housing. (Relevant segment: 1:40 - 1:43)
- Fill with Water: Fill the hot tub with water to the recommended fill line, typically indicated on the interior wall. Do not overfill.
Video: A demonstration of filling the hot tub with water using a hose. (Relevant segment: 1:52 - 1:56)
- Attach Insulated Cover: Place the insulated cover over the hot tub and secure it with the double locking safety clips. This helps retain heat and keeps debris out.
Video: This segment shows how to properly attach and secure the insulated cover to the hot tub. (Relevant segment: 1:57 - 2:03)
5. Operating Instructions
Your hot tub features a user-friendly digital control panel for easy operation:
Image: A close-up of the digital control panel, showing buttons for temperature, bubbles, and filtration.
- Power On/Off: Press the power button to turn the unit on or off.
- Temperature Adjustment: Use the up and down arrows to set your desired water temperature. The rapid heating system can reach up to 104°F (40°C).
- Bubble Function: Activate the 105 air jets by pressing the bubble button for a soothing massage experience.
- Filtration System: The filtration system can be activated independently to circulate and clean the water.
- Temperature Unit: Switch between Celsius (°C) and Fahrenheit (°F) display using the dedicated button.
- Lock Function: Use the lock button to prevent accidental changes to settings.
Video: This segment provides a visual guide on how to operate the hot tub's digital control panel, including temperature and bubble functions. (Relevant segment: 2:05 - 2:15)
6. Maintenance
Regular maintenance is crucial for the longevity and hygiene of your hot tub:
- Filter Cleaning/Replacement: Regularly clean the filter cartridges. Replace them every few weeks or as needed, depending on usage and water quality. Dirty filters can impede water flow and heating efficiency.
Image: The hot tub's filter housing, showing how it opens to access the filter cartridge for cleaning or replacement.
- Water Chemistry: Test the water regularly using appropriate test strips. Maintain proper pH, alkalinity, and sanitizer levels (e.g., chlorine or bromine) as per recommended guidelines for hot tubs.
- Water Change: Drain and refill the hot tub every 1-3 months, depending on usage. Use the drainage adapter for easy water removal.
- Cleaning the Tub: Clean the interior and exterior of the hot tub with a soft cloth and mild, non-abrasive cleaner.
- Cover Care: Keep the insulated cover clean and free of debris. Ensure it is securely fastened when the hot tub is not in use to prevent heat loss and contamination.
7. Troubleshooting
Here are solutions for common issues you might encounter:
| Problem | Possible Cause | Solution |
|---|---|---|
| Hot tub not heating | Dirty filter, low water level, heater malfunction. | Clean/replace filter. Ensure water is above minimum fill line. Check power connection. If issue persists, contact customer support. |
| Bubbles not working | Air pump malfunction, clogged air jets. | Ensure air pump is powered. Check for obstructions in air jets. |
| Water leaking | Loose connections, puncture in liner. | Tighten all hose connections. Use provided repair patch for small punctures. |
| Error Code (e.g., E5) | Specific system fault. | Refer to the specific error code section in your full product manual (if available) or contact customer support for diagnosis and resolution. |
8. Specifications
- Brand: JLeisure
- Model Name: Avenli London
- Color: Black
- Product Dimensions: 49"L x 49"W x 27"H
- Material: Vinyl
- Shape: Round
- Capacity: 181 Gallons (686 Liters)
- Seating Capacity: 2 to 3 Person
- Number of Air Jets: 105
- Maximum Temperature: 104°F (40°C)
- Assembly Required: Yes
- Item Weight: 61 pounds (27.72 Kilograms)
9. Warranty and Support
For warranty information, technical support, or replacement parts, please contact JLeisure customer service directly. Keep your purchase receipt and product model number handy for faster service.
You can often find contact details on the manufacturer's official website or through your retailer.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.