Introduction
Thank you for choosing the VIANIS Outdoor 3-Head Lamp Post Light with Outlet. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
Safety Information
- Electrical Safety: Always disconnect power at the circuit breaker before installation, servicing, or changing bulbs. Consult a qualified electrician if you are unsure about wiring procedures.
- Grounding: Ensure the fixture is properly grounded to avoid potential electrical shock.
- Bulb Requirements: Use only E26 base bulbs, maximum 100 watts per head (bulbs not included). Do not exceed the specified wattage.
- Outdoor Use: This fixture is designed for outdoor use and is waterproof. However, ensure all connections are sealed according to local electrical codes.
- Outlet Usage: The integrated outlet is designed to provide an additional power supply for outdoor equipment. Ensure connected devices do not exceed the maximum load of 1080W. The outlet is splash-proof and features an isolation compartment for safety.
- Handling: Handle glass components with care to prevent breakage.
Package Contents
Verify that all components are present before beginning installation:
- Lamp Post Light Assembly (3-head)
- Mounting Hardware
- Shade (Seeded Glass)
- Installation Template Card
- User Manual
Product Features
- Integrated Power Outlet: Provides a convenient additional power supply for outdoor equipment like lawnmowers, trimmers, or holiday lights. Designed to withstand adverse weather conditions, offering a safe and reliable power source.
- Classic Retro Style: Features an Oil Rubbed Bronze finish, gold trim, and seeded glass, complementing vintage decor. Delicate scrollwork accents enhance its European-inspired design.
- Dusk-to-Dawn Sensor: Equipped with a high-sensitivity photocell sensor that automatically turns the light off during the day (above 100 lux) and on at night (below 20 lux), ensuring energy efficiency and convenience.
- Hard-wired Design: Offers stable and reliable lighting performance in all weather conditions, unlike solar alternatives. Provides high brightness levels (up to 3 x 100W) throughout the night with minimal maintenance and a longer service life.
- Easy Installation: Includes all necessary mounting accessories and a template card for quick positioning. Compatible with fresh concrete installation or existing post bases with 7.68-inch bolt spacing.
- E26 Socket & Wide Application: Features a bottom-opening design for tool-free bulb replacement in under a minute. Requires 3 x max 100-watt E26 bulbs (not included). Ideal for illuminating backyards, porches, pathways, walkways, streets, and driveways.
Setup (Installation)
- Prepare the Installation Site: Ensure the ground masonry work is completed beforehand. The post can be installed in fresh concrete or replace an existing post base with a bolt spacing of 7.68 inches apart.
- Disconnect Power: Before starting, turn off the power at the main circuit breaker to prevent electrical shock.
- Mount the Post: Use the provided template card for accurate positioning of the mounting hardware. Secure the post base firmly to the prepared surface.
- Assemble the Lamp Heads: Carefully attach the lamp heads to the post. Note that some small nuts may be difficult to access; using needle-nose pliers or a similar tool can assist in tightening them.
- Wire the Fixture: Connect the fixture's wiring to your household electrical supply according to local electrical codes. Ensure all connections are secure and properly insulated.
- Install Bulbs: Insert three E26 base bulbs (max 100W each, not included) into the sockets. The bottom-opening design allows for easy, tool-free bulb replacement.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
Image: Detailed information on lamp post dimensions and features.
Image: Components of the VIANIS Outdoor Lamp Post Light.
Operating Instructions
Dusk-to-Dawn Sensor Operation
The VIANIS lamp post light is equipped with an automatic dusk-to-dawn sensor. Once installed and powered, the light will operate as follows:
- Automatic ON: The light will automatically turn on at night when the ambient brightness drops below 20 lux.
- Automatic OFF: The light will automatically turn off during the day when the ambient brightness reaches over 100 lux.
No manual intervention is required for daily operation of the lighting function.
Image: Dusk-to-Dawn sensor in action, light on at night.
Image: Visual representation of automatic dusk-to-dawn operation.
Using the Integrated Outlet
The lamp post includes a built-in electrical outlet for convenient access to power outdoors.
- Connect Devices: Plug your outdoor electrical devices (e.g., lawn equipment, holiday lights) directly into the outlet.
- Maximum Load: Do not exceed a total load of 1080 watts for devices connected to the outlet.
- Weather Protection: The outlet is designed to be splash-proof and includes an isolation compartment for safety in various weather conditions.
Image: Close-up of the built-in extra outlet.
Image: Lamp post outlet providing power for lawn equipment.
Image: Lamp post outlet powering outdoor holiday lights.
Maintenance
Bulb Replacement
To replace bulbs, ensure power is disconnected at the circuit breaker first. The fixture features a bottom-opening design, allowing for easy, tool-free access to the E26 sockets. Simply unscrew the old bulb and screw in a new E26 bulb (max 100W). Reconnect power after replacement.
Cleaning
Clean the fixture periodically with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish or glass. Ensure the fixture is dry before restoring power.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at night. | 1. Power is off. 2. Bulb is faulty or loose. 3. Dusk-to-dawn sensor malfunction. 4. Ambient light is too high. | 1. Check circuit breaker and wall switch. 2. Replace or tighten bulb(s). 3. Ensure sensor is not obstructed. If issue persists, contact support. 4. Ensure the sensor is not exposed to other light sources (e.g., streetlights, porch lights) that might keep it off. |
| Light stays on during the day. | 1. Dusk-to-dawn sensor malfunction. 2. Sensor is in a shaded area. | 1. Ensure sensor is clean and unobstructed. If issue persists, contact support. 2. Relocate the fixture or clear any obstructions blocking sunlight from reaching the sensor. |
| Outlet is not providing power. | 1. Power is off. 2. Device connected exceeds 1080W. 3. Internal wiring issue. | 1. Check circuit breaker. 2. Ensure connected device wattage is within limits. 3. Disconnect power and inspect wiring. Consult an electrician if needed. |
Specifications
- Brand: VIANIS
- Model Number: V86233E.B2
- Color: 3-head Bronze with Outlet
- Material: Aluminum, Glass
- Style: Retro, Vintage
- Indoor/Outdoor Usage: Outdoor
- Power Source: Hardwired
- Voltage: 120V AC
- Wattage (Max per bulb): 100 watts
- Bulb Base: E26
- Number of Light Sources: 3
- Special Features: Waterproof, Tempered Glass, Dusk to Dawn Sensor, Anti-rust
- Outlet Max Load: 1080W
- Item Dimensions (L x W x H): 24.4" x 9.4" x 89.4"
- Mounting Type: Pole Mount
- Water Resistance Level: Waterproof
Image: Weather resistance of the lamp post light.
Image: Hardwired power for reliable illumination.
Warranty
This VIANIS product is covered by a One (1) year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications. Please retain your proof of purchase for warranty claims.
Support
For technical assistance, troubleshooting, or warranty inquiries, please contact VIANIS customer support through the retailer where the product was purchased or visit the official VIANIS website for contact information.
Video: Official product overview of the VIANIS Retro Outdoor Post Lights with Outlet, demonstrating features and design.