AUDERWIN Solar Spot Lights (Model 8795) User Manual

Introduction

Welcome to the user manual for your AUDERWIN Solar Spot Lights. This guide provides essential information for the proper installation, operation, and maintenance of your solar spotlights to ensure optimal performance and longevity. Please read these instructions carefully before using the product.

Product Overview

The AUDERWIN Solar Spot Lights are designed for outdoor illumination, featuring 63 high-power LEDs that emit 6500K cool white light. They offer three distinct brightness modes and are built with IP65 waterproof and weatherproof ABS material for durability. The lights utilize high-efficiency polycrystalline silicon solar panels for charging.

AUDERWIN Solar Spot Light illuminating a garden pathway at night.

Setup and Installation

The solar spotlights offer two installation methods: ground insertion or wall mounting. Ensure the solar panel is positioned to receive maximum direct sunlight throughout the day for optimal charging.

Important Note:

Before initial use, cover the solar panel and press the power button to test the light's functionality. Ensure the light turns on.

Ground Installation:

1. Attach the stake to the bottom of the light unit.
2. Insert the assembled unit firmly into soft ground in a location that receives direct sunlight for at least 6-8 hours daily.
3. Adjust the light head to the desired angle (up to 120 degrees).

Step-by-step guide for ground installation of the solar spot light.

Wall Mounting:

1. Mark the desired mounting location on a wall.
2. Drill holes and insert anchors (if necessary for your wall material).
3. Screw the light unit securely onto the wall.
4. Adjust the light head to the desired angle.

Step-by-step guide for wall mounting the solar spot light.

Operating Instructions

The solar spot lights feature a push button control located on the back of the unit to cycle through three lighting modes. The lights automatically turn on at dusk and turn off at dawn, provided they have sufficient charge.

Mode Selection:

• Press the button once for Low Light Mode (approximately 24 hours of illumination on a full charge).
• Press the button twice for Medium Light Mode (approximately 18 hours of illumination on a full charge).
• Press the button three times for High Light Mode (operates at 100% brightness for 4 hours, then gradually dims to 40% for 2 hours, and finally to 20% for the remaining duration, totaling approximately 12 hours on a full charge).
• Press the button a fourth time to turn the light off.

Diagram showing the push button for mode selection and the three distinct lighting modes.

Illustration of automatic charging during the day and illumination at night.

Maintenance

• Cleaning: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean solar panel ensures efficient charging.
• Placement: Periodically check that the solar panel remains unobstructed by leaves, snow, or other objects that could block sunlight.
• Battery: The integrated lithium-ion battery is designed for long-lasting performance. No user maintenance is required for the battery.
• Weather Resistance: The IP65 rating ensures protection against water jets and dust. However, avoid submerging the unit in water.

Troubleshooting

• Light does not turn on at night:
  • Ensure the solar panel is receiving at least 6-8 hours of direct sunlight daily.
  • Verify the power button has been pressed to select a lighting mode.
  • Check for any obstructions blocking the solar panel.
  • During prolonged overcast or rainy weather, charging efficiency may be reduced, leading to shorter illumination times or no illumination. Allow for several sunny days to fully recharge.
• Light is dim or flickers:
  • The battery may not be fully charged. Ensure adequate direct sunlight exposure.
  • Clean the solar panel surface.
  • If the issue persists after several days of full charge, contact customer support.
• Light turns off too quickly:
  • This indicates insufficient battery charge. Ensure the solar panel is in an optimal position for maximum sunlight exposure.
  • The selected lighting mode affects duration; High Light Mode has a shorter maximum duration than Low Light Mode.

Specifications

Warranty and Support

AUDERWIN provides a 12-month worry-free assurance for this product, covering manufacturing defects and performance issues under normal use.

For any questions, concerns, or assistance, please contact AUDERWIN customer service. You can visit the official AUDERWIN Store for more information and support:

AUDERWIN Store on Amazon