1. Product Overview
The Vente-unique ISAURE II is a modern wall-mounted bathroom cabinet designed for efficient space utilization and contemporary aesthetics. It features a 150 cm wide cabinet with a light wood finish, providing ample storage. The unit includes two integrated square ceramic washbasins, offering a functional and stylish solution for your bathroom.

Image 1: Front view of the Vente-unique ISAURE II bathroom cabinet with two square washbasins installed.
2. Safety Information
- Read all instructions carefully before assembly and use.
- Ensure proper wall mounting using appropriate fasteners for your wall type to prevent the cabinet from falling and causing injury.
- Do not overload the drawers. Distribute weight evenly.
- Keep small parts and packaging materials away from children.
- Always wear appropriate safety gear (e.g., gloves, eye protection) during assembly.
3. Package Contents
Verify that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, contact customer support.
- 1 x ISAURE Under-sink Cabinet: Light wood finish, particle board construction. Dimensions: 173 cm (L) x 55 cm (W) x 11 cm (H), Weight: 37 kg.
- 2 x VERINI Freestanding Washbasins: White ceramic. Dimensions: 51 cm (L) x 51 cm (W) x 25 cm (H), Weight: 14 kg each.
- Assembly hardware (screws, wall plugs, etc.)
- Assembly instructions.

Image 2: Components of the ISAURE II cabinet and washbasins.
4. Setup and Assembly Instructions
Assembly is required for this product. Follow the detailed instructions provided in the separate assembly manual included in the package. Ensure you have the necessary tools (e.g., screwdriver, drill, level) before starting.
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out and compare them against the parts list in the assembly manual.
- Assemble the Cabinet Frame: Follow the step-by-step diagrams to connect the cabinet panels using the provided hardware. Ensure all connections are secure.
- Install Drawers: Assemble the two drawers according to the instructions. Install the drawer runners into the cabinet and then insert the assembled drawers.
- Mount to Wall: Determine the desired height and mark the drilling points on the wall. Drill holes and insert appropriate wall plugs. Securely attach the cabinet to the wall using the provided mounting hardware. Use a level to ensure the cabinet is perfectly horizontal.
- Install Washbasins: Place the two VERINI ceramic washbasins onto the designated areas on the cabinet top. Apply a silicone sealant around the base of the washbasins to secure them and prevent water leakage. Note: Faucets are not included and must be purchased separately.
- Connect Plumbing: Connect the washbasin drains and water supply lines to your existing plumbing system. Ensure all connections are watertight.

Image 3: Technical diagram showing cabinet dimensions (Length: 1500mm, Height: 320mm, Depth: 470mm).
5. Operating Instructions
The ISAURE II cabinet features two push-to-open drawers for convenient access to your stored items.
- Opening Drawers: Gently push the center of the drawer front. The drawer will release and extend slightly. Pull the drawer out fully to access contents.
- Closing Drawers: Push the drawer back into the cabinet until you feel the soft-close mechanism engage. The drawer will then slowly and quietly close completely.

Image 4: Cabinet with drawers open, illustrating internal storage space.

Image 5: Close-up of a drawer interior.
6. Maintenance and Care
- Cabinet Surfaces: Clean the light wood finish with a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or solvents, as these can damage the surface. Wipe spills immediately to prevent moisture damage to the particle board.
- Ceramic Washbasins: Clean the ceramic washbasins with non-abrasive bathroom cleaners. Rinse thoroughly with water after cleaning to remove any residue.
- Drawer Runners: Periodically check drawer runners for smooth operation. If necessary, clean any dust or debris and apply a silicone-based lubricant.
- Wall Mountings: Regularly inspect the wall mountings to ensure they remain secure. Tighten any loose screws if needed.

Image 6: Close-up of a VERINI square ceramic washbasin.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Drawers do not open/close smoothly | Obstruction in runners; dirty runners; misaligned runners. | Check for objects blocking the drawer. Clean runners with a damp cloth. Realign runners if necessary, referring to the assembly manual. |
| Water leakage from washbasin | Improperly sealed drain; loose faucet connection; damaged washbasin. | Ensure drain connections are tight and properly sealed with plumber's putty or silicone. Check faucet connections. If washbasin is damaged, contact customer support. |
| Cabinet feels unstable on wall | Loose wall mounts; incorrect wall plugs for wall type; overloaded cabinet. | Tighten all wall mounting screws. Ensure appropriate wall plugs were used for your wall material. Reduce weight in the cabinet. If instability persists, consult a professional. |
8. Specifications
- Brand: Vente-unique
- Model: ISAURE II
- Type: Wall-Mounted Bathroom Cabinet with Double Washbasin
- Cabinet Material: Particle Board (Truciolato)
- Cabinet Finish: Smooth, Light Natural Wood Effect
- Cabinet Dimensions (L x D x H): 150 cm x 47 cm x 32 cm
- Washbasin Material: Ceramic
- Washbasin Type: Freestanding Square
- Washbasin Dimensions (L x D x H): 41 cm x 41 cm x 15 cm (each)
- Number of Drawers: 2
- Drawer Mechanism: Push-to-open with Soft-Close
- Faucets: Not included
- Total Product Weight: Approximately 65.4 kg
- Assembly: Required
9. Warranty and Support
This product is returnable within 30 days of receipt. For any questions, technical assistance, or warranty claims, please contact Vente-unique customer support. You can find more information and contact details on the official Vente-unique store page:





