1. Product Overview
The TOTAL TGT5265511 1HP Gasoline Hedge Trimmer is a powerful and efficient tool designed to make your hedge trimming tasks effortless. This trimmer features a 25.4cc two-stroke engine, delivering 1 horsepower at an impressive 10,000 RPM. The blade length is 55 cm, capable of cutting branches up to 26-28 mm thick. The quick-start system ensures easy and hassle-free starting, while the ergonomic design includes a rotating handle and hand guard for added comfort and safety. Additionally, it comes with a 550ml fuel tank for extended operation without frequent refueling.
- Designed for effortless hedge trimming tasks.
- 25.4cc two-stroke engine.
- Delivers 1 horsepower at an impressive 10,000 RPM.
2. Safety Information
Always prioritize safety when operating power tools. Read and understand all safety warnings and instructions before using the hedge trimmer.
2.1 General Safety Rules
- Wear appropriate personal protective equipment (PPE), including eye protection, hearing protection, gloves, and sturdy footwear.
- Keep children and bystanders at a safe distance (at least 15 meters/50 feet) from the operating area.
- Do not operate the hedge trimmer in wet conditions or in the presence of flammable liquids or gases.
- Inspect the trimmer for damage before each use. Do not use if any parts are damaged.
- Ensure all guards and safety devices are in place and functioning correctly.
- Never modify the hedge trimmer or use it for purposes other than its intended use.
2.2 Specific Safety Rules for Hedge Trimmers
- Hold the hedge trimmer firmly with both hands during operation.
- Keep hands and feet away from the cutting blades.
- Never attempt to clear jammed material while the engine is running.
- Turn off the engine and disconnect the spark plug wire before performing any maintenance, cleaning, or when transporting the trimmer.
- Be aware of the blade's movement and potential kickback.
- Do not overreach. Maintain proper footing and balance at all times.
3. Components
Familiarize yourself with the main components of your hedge trimmer:
- Engine Housing
- Fuel Tank
- Starter Handle
- Front Handle (with hand guard)
- Rear Handle (rotating)
- Throttle Trigger
- Stop Switch
- Cutting Blades
- Blade Guard
4. Setup
4.1 Fuel Mixing
This hedge trimmer uses a two-stroke engine and requires a specific gasoline-to-oil mixture. Refer to the engine manufacturer's recommendations for the correct mixing ratio, typically found on the fuel cap or in a separate engine manual. Use fresh, unleaded gasoline and high-quality two-stroke engine oil.
- Obtain a clean, approved fuel container.
- Pour half of the required gasoline into the container.
- Add the entire amount of two-stroke oil according to the recommended ratio.
- Shake the container thoroughly to mix the fuel and oil.
- Add the remaining gasoline and shake again.
- Carefully pour the mixed fuel into the hedge trimmer's fuel tank, avoiding spills.
WARNING: Never use straight gasoline or automotive oil in a two-stroke engine. This will cause severe engine damage.
4.2 Initial Inspection
- Check that all nuts, bolts, and screws are securely tightened.
- Ensure the blade guard is properly installed.
- Verify that the cutting blades are clean and free from debris.
5. Operating Instructions
5.1 Starting the Engine
- Place the hedge trimmer on a flat, stable surface.
- Ensure the stop switch is in the 'ON' position.
- Push the primer bulb several times until fuel is visible in the return line.
- Engage the choke (if applicable, refer to engine specific instructions).
- Pull the starter handle firmly and steadily until the engine attempts to start or starts briefly.
- Disengage the choke.
- Pull the starter handle again until the engine starts and runs smoothly.
- Allow the engine to warm up for a few moments before beginning operation.
5.2 Trimming Techniques
- Hold the trimmer with both hands, maintaining a firm grip.
- Keep the blades parallel to the hedge for an even cut.
- Use a sweeping motion, moving the trimmer along the hedge.
- For vertical trimming, start at the bottom and work your way up.
- Avoid cutting branches thicker than the recommended maximum (26-28 mm).
5.3 Stopping the Engine
To stop the engine, simply move the stop switch to the 'OFF' position.
6. Maintenance
Regular maintenance ensures optimal performance and extends the life of your hedge trimmer. Always turn off the engine and disconnect the spark plug wire before performing any maintenance.
6.1 Blade Maintenance
- Cleaning: After each use, clean the blades of sap and debris using a stiff brush and a suitable cleaning solution.
- Lubrication: Apply a light machine oil or blade lubricant to the blades before and after each use to prevent rust and ensure smooth operation.
- Sharpening: Dull blades can tear foliage and strain the engine. Sharpen the blades regularly or have them professionally sharpened.
6.2 Engine Maintenance
- Air Filter: Clean the air filter regularly (more often in dusty conditions). Replace if damaged.
- Spark Plug: Inspect the spark plug periodically. Clean or replace if fouled or worn.
- Fuel Filter: Check and replace the fuel filter as needed to prevent fuel system blockages.
6.3 Storage
- Drain the fuel tank completely or use a fuel stabilizer if storing for more than 30 days.
- Clean the entire trimmer thoroughly.
- Store the hedge trimmer in a dry, well-ventilated area, out of reach of children.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Engine does not start | No fuel, incorrect choke position, fouled spark plug, clogged fuel filter | Check fuel level and mixture, adjust choke, clean/replace spark plug, clean/replace fuel filter |
| Engine runs poorly | Incorrect fuel mixture, dirty air filter, worn spark plug | Verify fuel mixture, clean air filter, replace spark plug |
| Blades not cutting effectively | Dull blades, blades jammed with debris | Sharpen blades, clean blades thoroughly (with engine off) |
| Excessive vibration | Loose components, damaged blade | Check all fasteners, inspect blade for damage and replace if necessary |
8. Specifications
| Specification | Value |
|---|---|
| Product Type Name | Hedge Trimmer |
| Item Model Number | TGT5265511 |
| Brand Name | TOTAL |
| Power Source | Gasoline |
| Engine Displacement | 25.4 cc |
| Engine Type | Two-stroke |
| Power Output | 1 HP |
| Max Engine Speed | 10,000 RPM |
| Blade Length | 55 cm |
| Max Cutting Diameter | 26-28 mm |
| Fuel Tank Capacity | 550 ml |
| Item Weight | 6.3 Kilograms |
| Product Dimensions | 70 x 20 x 28 cm |
| Materials | Alloy Steel, Plastic |
| Blade Material | Alloy Steel |
| Included Components | 1 x TOTAL TGT5265511 1HP Gasoline Hedge Trimmer |
| First Available Date | November 7, 2023 |
9. Warranty and Support
This TOTAL TGT5265511 1HP Gasoline Hedge Trimmer comes with a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims.
For technical support, spare parts, or warranty service, please contact your authorized TOTAL dealer or visit the official TOTAL website for contact information in your region. Do not attempt to repair the product yourself, as this may void the warranty and pose safety risks.