1. Introduction
This manual provides essential information for the proper setup, operation, and maintenance of your CRUA 24.5-inch FHD 165Hz Gaming Monitor. Please read this manual thoroughly before using the product to ensure optimal performance and safety. Keep this manual for future reference.
2. Product Features
The CRUA 24.5-inch Gaming Monitor is designed to deliver a high-performance visual experience with several key features:
- Smooth Gaming Experience: Enjoy ultra-smooth motion with a 3ms response time, 165Hz refresh rate, and FreeSync support, minimizing screen tearing and input lag.
- Immersive Visuals: Features FHD (1920x1080P) resolution, 120% sRGB color gamut, 8-bit color depth, and 16.7 million colors for vivid and accurate displays. A 300cd/m² brightness and 1000:1 static contrast ratio enhance detail. Low blue light mode helps protect eyes during extended use.
- Ergonomic Design: The monitor stand supports 90° pivot for portrait orientation, 120mm height adjustment, tilt (-5°~15°), and swivel (-15°~15°) for personalized viewing. It also supports VESA wall mounting (75mm x 75mm).
- Versatile Connectivity: Equipped with HDMI2.0, DP1.2, and 3.5mm audio output interfaces for connecting to various devices. A USB port is included for charging.
- Sleek Design: Features three-sided narrow bezels for a distraction-free viewing environment and a snap-on bracket for easy installation. A red hub helps organize cables for a tidy desktop.
Image: Front view of the CRUA 24.5-inch Gaming Monitor, showcasing its sleek design and narrow bezels.
Image: The monitor screen displaying a wide range of vibrant colors, highlighting its 120% sRGB, 16.7 million colors, and 8-bit color depth capabilities.
Image: A diagram illustrating the monitor's ergonomic adjustments, including tilt (-5° to 15°), swivel (L/R 15°), height adjustment (0-120mm), and pivot (90°).
Image: The rear panel of the monitor, detailing the available connectivity ports: DisplayPort 1.2, HDMI 2.0, 3.5mm Audio Out, USB (for charging only), and DC Jack.
3. What's in the Box
Upon unpacking, ensure all the following items are present:
- 24.5 inch gaming monitor
- DP cable
- Base and Support
- User manual
- Monitor wall mount screws
4. Setup
4.1 Stand Assembly
To assemble the monitor stand:
- Attach the stand base to the support column using the provided screw.
- Align the assembled stand with the mounting area on the back of the monitor.
- Gently push the stand into place until it clicks securely. Ensure the red release tab is engaged.
Video: Official CRUA 24.5 Inch Rotating Gaming Monitor Installation Video. This video demonstrates the step-by-step process of assembling the monitor stand and attaching it to the display, including how to adjust its rotation.
4.2 Connecting Cables
Connect the necessary cables to the monitor:
- Power Cable: Connect the power adapter to the DC Jack on the monitor and then to a power outlet.
- Display Cable: Use the provided DP cable for optimal performance (up to 165Hz). Alternatively, use an HDMI 2.0 cable (up to 144Hz). Connect one end to the monitor and the other to your computer's graphics card.
- Audio Cable (Optional): If using external speakers or headphones, connect them to the 3.5mm audio output jack.
- USB Cable (Optional): Connect devices for charging to the USB port.
4.3 Wall Mounting
The monitor supports VESA wall mounts with a 75mm x 75mm pattern. Use the provided wall mount screws. Refer to your wall mount's instructions for proper installation.
Image: Detailed dimensions of the monitor and its stand, along with an indication of the 75mm x 75mm VESA wall mount compatibility.
5. Operating Instructions
5.1 Power On/Off
Press the power button, usually located on the bottom right side of the monitor, to turn it on or off. The power indicator light will illuminate when the monitor is on.
5.2 On-Screen Display (OSD) Menu
The OSD menu allows you to adjust various monitor settings. Typically, buttons on the back or bottom of the monitor are used to navigate the menu:
- Press a button to open the OSD menu.
- Use the navigation buttons (up/down/left/right) to select options.
- Press the confirmation button to enter a sub-menu or confirm a setting.
- Use the exit button to close the OSD menu.
5.3 Adjusting Settings
Within the OSD menu, you can adjust:
- Brightness/Contrast: Adjust the overall luminance and contrast levels.
- Color Settings: Modify color temperature, gamma, and individual RGB values.
- Input Source: Manually select between DP and HDMI inputs.
- Audio: Adjust volume or mute the built-in speakers.
- Display Modes: Select preset display modes optimized for different content (e.g., Standard, Game, Movie).
- Low Blue Light: Activate this mode to reduce blue light emission for eye comfort.
5.4 FreeSync Activation
To enable FreeSync, ensure your graphics card supports AMD FreeSync and that it is enabled in your graphics card's control panel. Then, activate FreeSync within the monitor's OSD menu under the 'Gaming' or 'Display' section.
Image: A visual comparison demonstrating the elimination of screen tearing when FreeSync is enabled, compared to when it is off.
5.5 Ergonomic Adjustments
Adjust the monitor to your preferred viewing position:
- Height: Gently push or pull the monitor up or down along the stand column.
- Tilt: Hold the top and bottom edges of the monitor and tilt it forwards or backwards.
- Swivel: Rotate the monitor left or right on its base.
- Pivot: Rotate the monitor 90 degrees to switch between landscape and portrait orientation.
Video: Official CRUA 24.5-inch Vertical Gaming Monitor overview, demonstrating its ergonomic adjustments including height, tilt, swivel, and pivot functionality.
6. Maintenance
To maintain your monitor's performance and appearance:
- Cleaning the Screen: Use a soft, lint-free cloth slightly dampened with water or a screen-cleaning solution. Do not spray liquid directly onto the screen.
- Cleaning the Casing: Wipe the monitor casing with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Ventilation: Ensure the ventilation openings on the monitor are not blocked to prevent overheating.
7. Troubleshooting
If you encounter issues with your monitor, refer to the following common solutions:
| Problem | Possible Solution |
|---|---|
| No image on screen | Ensure power cable is securely connected. Check display cable connection (DP/HDMI). Verify correct input source is selected in OSD. |
| Image is blurry or distorted | Check display resolution settings on your computer. Ensure the display cable is not damaged. |
| No sound from speakers | Adjust monitor volume in OSD. Check computer's audio output settings. Ensure 3.5mm audio cable is connected correctly if using external audio. |
| Screen flickering | Ensure FreeSync is enabled (if applicable). Check refresh rate settings on your computer. Try a different display cable. |
| Monitor not turning on | Verify power outlet is working. Check power adapter and cable for damage. |
8. Specifications
| Feature | Detail |
|---|---|
| Screen Size | 24.5 Inches |
| Resolution | FHD 1920 x 1080 Pixels |
| Refresh Rate | 165Hz (via DP1.2), 120Hz/144Hz (via HDMI2.0) |
| Response Time | 3ms |
| Color Gamut | 120% sRGB |
| Brightness | 300 Candela (cd/m²) |
| Contrast Ratio | 1000:1 (Static) |
| Aspect Ratio | 16:9 |
| Connectivity | HDMI2.0, DP1.2, 3.5mm Audio Out, USB (charging only) |
| Ergonomics | Height, Pivot, Swivel, Tilt Adjustable |
| Wall Mount | 75mm x 75mm VESA |
| Product Dimensions | 5.11 x 21.89 x 19.29 inches |
| Item Weight | 11.97 pounds |
| Model Number | CR245ZB |
9. Warranty and Support
Your CRUA monitor comes with a 1-3 year warranty. For any inquiries, technical assistance, or warranty claims, please contact CRUA Technology via email. We offer 24/7 support and lifetime technical support to ensure your satisfaction.
- Warranty Period: 1-3 Years (depending on region/purchase terms)
- Support Availability: 24/7
- Technical Support: Lifetime
- Contact: Refer to your product packaging or the official CRUA website for specific email contact information.