1. Product Overview
The RILAND MIG200T is a versatile 6-in-1 multi-process welding machine designed for various welding requirements. It incorporates advanced RICHIP technology for intelligent synergic control, ensuring optimal welding performance across different modes.
Figure 1: RILAND MIG200T Multi-Process Welder with included accessories.
Key Features:
- 6-in-1 Welding Functions: Supports Gas MIG, Gasless Flux Core MIG (FCAW), Stick/MMA, Spot welding, Lift TIG, and optional spool gun connection.
- Intelligent Synergic Control (RICHIP): Features real hot start, arc force, anti-stick, lowest spatter, automatic identification of wire diameter, gas, and welding function, with super stable wire feeding under small current.
- Built-in Useful Functions: Adaptive control, burn-back adjustment, real-time monitoring of current, voltage, and temperature for improved welding quality. Includes 2T/4T trigger modes for spot welding.
- Dual Voltage Compatibility: Operates on 110V/200V power supplies.
- Safety Features: Over-heating protection, over-current protection, over-loading protection, and built-in VRD for user safety.
- Clear Digital Display: Large segment display provides accurate data and easy readability.
2. Setup and Installation
2.1 Package Contents:
Verify all items are present in the package:
- 1 x MIG200T Welder Unit
- 1 x MIG Torch (8.2ft)
- 1 x Earth Clamp (6.6 ft)
- 1 x Wire Feed Wheel
- 1 x Tubing
- 1 x Cleaning Brush
- 1 x 50A/250V Power Cord
- User Manual
Note: TIG Torch and spool gun are not included and must be purchased separately for respective functions.
Figure 2: Included accessories for the RILAND MIG200T welder.
2.2 Power Connection:
- Ensure the welder is turned off before connecting to power.
- Connect the provided 50A/250V power cord to the welder.
- The MIG200T supports both 110V and 200V input. Use the appropriate power outlet for your region and ensure it meets the welder's power requirements.
2.3 Wire Spool Installation (MIG/Flux Core):
- Open the side panel of the welder to access the wire feed compartment.
- Mount the wire spool onto the spindle, ensuring it rotates freely.
- Thread the welding wire through the wire feed mechanism and into the MIG torch liner.
- Adjust the tension of the wire feed roller to prevent slippage or crushing of the wire.
Figure 3: Internal view of the RILAND MIG200T showing the wire spool and auto wire feeding mechanism.
2.4 Gas Connection (Gas MIG/Lift TIG):
- Connect the provided tubing to the gas inlet on the rear of the welder.
- Connect the other end of the tubing to your gas cylinder regulator.
- Ensure all connections are secure and leak-free.
2.5 Connecting Welding Cables:
- MIG Torch: Connect the MIG torch to the designated connector on the front panel.
- Earth Clamp: Connect the earth clamp cable to the appropriate terminal (polarity depends on welding mode).
- Stick/MMA: For Stick welding, connect the electrode holder and earth clamp to the correct terminals based on electrode polarity requirements.
- Lift TIG: For Lift TIG, connect the TIG torch (not included) and earth clamp to the correct terminals.
3. Operating Instructions
3.1 Control Panel Overview:
The MIG200T features a large segment digital display and intuitive controls for easy operation.
Figure 4: Detailed view of the RILAND MIG200T control panel with synergic settings.
3.2 Selecting Welding Mode:
The MIG200T offers 6 welding functions:
- Gas MIG (GMAW): For welding with shielding gas.
- Gasless Flux Core MIG (FCAW): For welding without external shielding gas, using flux-cored wire.
- Stick/MMA: For welding with coated electrodes.
- Spot Welding: For precise spot welds.
- Lift TIG (GTAW): For TIG welding with a lift arc start (TIG torch not included).
- Spool Gun: For aluminum welding (spool gun not included).
Use the mode selection buttons on the control panel to choose the desired welding process.
Figure 5: Diagram illustrating the various welding modes supported by the MIG200T.
3.3 Synergic Control:
The RICHIP intelligent synergic control automatically adjusts welding parameters based on material thickness and selected wire diameter. This simplifies setup and optimizes weld quality.
- Select your welding mode and wire diameter.
- The machine will suggest optimal voltage and wire feed speed.
- Fine-tune parameters using the adjustment knobs if necessary.
3.4 2T/4T Trigger Modes:
The MIG200T supports 2T (two-touch) and 4T (four-touch) trigger modes, particularly useful for spot welding and longer welds to reduce operator fatigue.
Figure 6: Control panel highlighting the 2T/4T trigger mode selection for MIG/Flux welding.
3.5 Welding Different Materials:
The MIG200T is capable of welding a variety of materials:
- MMA & Lift TIG: Suitable for 1/16" to 1/8" electrodes (E6013 & E7018) for carbon steel plate over 1.5mm. Lift TIG mode handles carbon steel and 1-4mm stainless steel plate.
- Gas/Gasless MIG: Adapts to 0.030"/0.040" carbon steel wire (MIG mode) and 0.030"/0.040" flux cored wire (FLUX mode). Carbon steel plate over 1.5mm can be welded in both modes.
- Aluminum Welding: Requires an optional spool gun and 0.040" aluminum wire.
Figure 7: Examples of materials that can be welded with the RILAND MIG200T, including cast iron, mild steel, sheet metal, alloy steel, stainless steel, and aluminum.
3.6 Official Product Videos:
RILAND 6-in-1 MIG Welder Review by Lakeside Autobody
Video 1: A detailed review of the RILAND 6-in-1 MIG Welder (MIG200T) by Lakeside Autobody, demonstrating its features and capabilities.
RILAND MIG 200T Review by D.I.Y. AUTO SCHOOL
Video 2: A review of the RILAND MIG 200T by D.I.Y. AUTO SCHOOL, showcasing its performance and ease of use.
RILAND 130A MIG/TIG Welder Synergic Control Review
Video 3: A review highlighting the Synergic Control and IGBT Inverter features, demonstrated on a RILAND 130A MIG/TIG Welder. While a different model, the core technologies are similar to the MIG200T.
4. Safety Guidelines
The RILAND MIG200T is equipped with multiple safety features to protect the user and the machine. Always adhere to general welding safety practices.
- Over-heating Protection: The machine will automatically shut down if it overheats. Allow it to cool down before resuming operation.
- Over-current Protection: Prevents damage from excessive current draw.
- Over-loading Protection: Safeguards internal components from overload conditions.
- Built-in VRD (Voltage Reduction Device): Enhances user safety by reducing open-circuit voltage when not welding.
- Always wear appropriate Personal Protective Equipment (PPE), including a welding helmet, gloves, and protective clothing.
- Ensure adequate ventilation in the welding area.
- Keep flammable materials away from the welding zone.
Figure 8: Visual representation of the safety features integrated into the RILAND MIG200T welder.
5. Technical Specifications
| Feature | Specification |
|---|---|
| Brand | RILAND |
| Model | MIG 200T |
| Item Weight | 25.5 pounds |
| Package Dimensions | 20.4 x 16.3 x 11.9 inches |
| Input Voltage | 110V/200V |
| Max Amperage | 200Amp |
| Welding Processes | Gas MIG, Gasless Flux Core MIG, Stick/MMA, Spot Welding, Lift TIG, Spool Gun (optional) |
| Power Cord | 1 x 50A/250V |
Figure 9: Detailed technical specifications for the RILAND MIG200T.
6. Warranty & Support
RILAND is committed to providing quality products and customer satisfaction.
- 30-Day Money Back Guarantee: If you are not satisfied with your purchase, you may return it within 30 days for a full refund.
- 2-Year Warranty: The RILAND MIG200T welder is covered by a 2-year warranty against manufacturing defects.
- 24/7 Customer Service: RILAND offers round-the-clock customer service to assist with any inquiries or support needs.
For warranty claims, technical support, or general inquiries, please contact RILAND customer service through the official channels provided at the time of purchase.
