PXN HB S 16-Bit Hall Sensor USB PC Handbrake User Manual

Introduction

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your PXN HB S 16-Bit Hall Sensor USB PC Handbrake. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Safety Information

• Ensure the handbrake is securely mounted before use to prevent movement during intense gaming sessions.
• Keep the device away from water and other liquids to prevent electrical damage.
• Avoid exposing the handbrake to extreme temperatures or direct sunlight.
• Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.
• Use only the provided accessories and cables.

Package Contents

Verify that all items are present in the package:

• PXN HB S Handbrake Unit
• USB-B Cable
• Handbrake Grip
• User Manual
• Securing Clamp
• Toolkit (Hexagonal wrenches, screwdriver)
• Spring and Damping Kit (Includes additional springs/dampers for adjustment)

Image: PXN HB S Handbrake unit with its securing clamp and other accessories.

Setup

1. Handle Grip Installation

1. Take the handbrake grip out of the packaging.
2. Align the grip with the threaded rod on the handbrake unit.
3. Rotate and tighten the grip onto the rod until it is secure.

2. Mounting the Handbrake

The PXN HB S Handbrake can be mounted using the included securing clamp or by bolting it directly to a sim rig.

• Using the Securing Clamp: Attach the clamp to the base of the handbrake. Secure the handbrake to a desk or table (up to 7 cm thick) by tightening the clamp screws.
• Direct Bolting: The handbrake base features threaded screw holes for direct mounting to compatible sim racing cockpits or stands.

Image: Detailed view of the desktop clamping system, illustrating its carbon steel construction and EVA shock-absorbing pad for stable mounting.

3. PC Connection

The PXN HB S Handbrake is designed for plug-and-play functionality on PC Windows systems.

1. Connect the provided USB-B cable to the port on the handbrake unit.
2. Plug the other end of the USB-B cable into an available USB port on your PC.
3. The system should automatically detect and install the necessary drivers.

Image: Illustration confirming compatibility exclusively with PC Windows, explicitly showing Xbox and PlayStation consoles as incompatible.

Operating the Handbrake

1. Angle Adjustment

The handbrake's angle can be adjusted to suit your preference, allowing for both 90-degree (vertical) and 180-degree (horizontal) orientations.

1. Using the hexagonal wrench from the toolkit, unscrew the bolts on the connecting rod.
2. Adjust the rod to the desired angle (90 or 180 degrees).
3. Tighten the screws securely to fix the angle.

Image: Visual representation of the handbrake's ability to switch between vertical and horizontal grip modes for different racing scenarios.

2. Force Adjustment

The handbrake's force can be customized by replacing the internal spring or damping rubber.

1. Unscrew the side bolt kits and the top cover of the handbrake unit using the M5 wrench.
2. Carefully remove the existing spring/damping kit.
3. Insert the desired replacement spring or damping rubber from the included kit.
4. Re-tighten the screws and replace the top cover.

Image: An exploded view of the handbrake's internal mechanism, showing the replaceable spring and damping rubber for force adjustment.

3. Stroke Adjustment

The handbrake's travel stroke can be adjusted from 16mm to 10mm by modifying the limit plate.

1. Using a screwdriver, remove the Phillips screws on the limit plate.
2. Flip the limit plate to its alternative position.
3. Secure the limit plate by re-tightening the screws. This will reduce the stroke to 10mm.

4. Compatibility

The PXN HB S Handbrake is compatible with various sim racing steering wheels on PC Windows, including:

• PXN V3, V900, V9, V10, V12
• Logitech G27, G29, G920, G923
• Thrustmaster T500, T300

It is compatible with popular racing games such as Assetto Corsa, Forza Horizon, Need for Speed, Euro Truck Simulator 2, and Dirt Rally 2.0.

Image: The PXN HB S Handbrake displayed with logos of compatible racing games, emphasizing its broad support for PC titles.

Maintenance

• Regularly clean the exterior of the handbrake with a soft, dry cloth.
• Avoid using abrasive cleaners or solvents that could damage the finish.
• Periodically check all screws and connections to ensure they remain tight.
• If adjusting internal components, ensure they are reassembled correctly to prevent malfunction.

Troubleshooting

1. Handbrake Not Detected by PC

• Ensure the USB-B cable is securely connected to both the handbrake and the PC.
• Try connecting the handbrake to a different USB port on your PC.
• Restart your PC.
• Verify that your operating system is PC Windows, as the device is not compatible with consoles.

2. Inconsistent Force or Stroke

• Check if the internal spring and damping rubber are correctly installed and not damaged.
• Ensure all screws related to force and stroke adjustment are tightened.
• If you have adjusted the stroke, confirm the limit plate is correctly positioned and secured.

3. Physical Instability

• If using the clamp, ensure it is fully tightened to the desk/table.
• If bolted, check that all mounting bolts are secure.

Specifications

Image: Technical drawing illustrating the precise dimensions of the PXN HB S Handbrake unit.

Warranty

PXN offers a 12-month warranty for the HB S Handbrake from the date of purchase. This warranty covers manufacturing defects and issues arising from normal use. For any product problems, please contact our customer service staff for assistance.

Support

For further assistance, technical support, or warranty claims, please visit the official PXN website or contact their customer service department. Contact information can typically be found on the product packaging or the PXN brand store page.