Graco Turn2Me 3-in-1 Rotating Convertible Car Seat Instruction Manual

1. Introduction

The Graco Turn2Me 3-in-1 Rotating Convertible Car Seat, model XBF-AC-528, is designed to provide safety and convenience for your child from infancy through booster years. This manual provides essential information for proper installation, use, and maintenance to ensure your child's safety and comfort.

Key Features:

• One-Handed Rotation: Rotate from rear to forward-facing mode easily.
• 3-in-1 Car Seat: Provides rear-facing harness (4-40 lbs), forward-facing harness (22-65 lbs), and highback booster (40-100 lbs).
• Quick Installation: Features SnugLock technology for installation in less than a minute using vehicle seat belt or LATCH.
• No-Rethread Harness: Simply Safe Adjust Harness System adjusts headrest and harness together.
• InRight LATCH: Push-button feature for easy, one-second attachment with audible click.
• Adjustable Headrest: 10-position adjustable headrest for growing children.
• ProtectPlus Engineered: Provides safety in frontal, side, rear, and rollover crashes.
• Removable Inserts: Plush head and body inserts for infant comfort.
• Harness Storage: Compartment keeps harness safely stored in booster mode.
• Fuss-Free Harness Pockets: Conveniently hold harness out of the way for easy in and out.

2. Safety Information

Always read and understand all instructions before using the car seat. Failure to follow instructions can result in serious injury or death.

The Graco Turn2Me car seat is ProtectPlus Engineered, providing protection in frontal, side, rear, and rollover crashes. This car seat meets or exceeds all applicable US safety standards.

Weight and Height Limits:

• Rear-Facing Harness: 4-40 lbs
• Forward-Facing Harness: 22-65 lbs
• Highback Booster: 40-100 lbs
• Maximum Height: 57 inches

Image: The car seat is designed with ProtectPlus Engineering for comprehensive safety.

3. Setup & Installation

The Graco Turn2Me features SnugLock technology for quick and secure installation using either the vehicle seat belt or LATCH system. Always ensure the car seat is installed tightly and does not move more than 1 inch side-to-side or front-to-back at the belt path.

3.1 LATCH Installation

1. Locate the lower LATCH anchors in your vehicle's seat.
2. Attach the InRight LATCH connectors from the car seat to the vehicle's LATCH anchors. Listen for an audible 'click' to confirm secure attachment.
3. Press firmly down on the car seat while pulling the LATCH strap to remove all slack and ensure a tight fit.

3.2 Vehicle Seat Belt Installation

1. Route the vehicle's lap and shoulder belt through the designated belt path on the car seat.
2. Buckle the seat belt.
3. Remove all slack from the seat belt by pressing down firmly on the car seat while tightening the belt.

Image: SnugLock technology simplifies the installation process.

Image: The easy-adjust harness ensures a perfect fit as your child grows.

3.3 Harness Adjustment & Rotation

• Simply Safe Adjust Harness System: To adjust the harness and 10-position headrest, simply squeeze the adjustment lever and slide the headrest up or down. Ensure the harness straps are at or just below the child's shoulders for rear-facing, and at or just above the child's shoulders for forward-facing.
• One-Handed Rotation: To rotate the car seat, locate the rotation lever at the front of the base. Squeeze the lever and turn the seat to the desired rear-facing or forward-facing position. Ensure the seat locks securely into place before driving.

Image: The rotating feature allows for easy loading and unloading of your child.

4. Operating Modes

The Graco Turn2Me car seat adapts to your child's growth with three distinct modes of use:

4.1 Rear-Facing Harness Mode

This mode is suitable for infants weighing 4-40 lbs. Position the car seat rear-facing in the vehicle. Ensure the recline angle is appropriate for your infant's age and weight, typically indicated by a level indicator on the car seat. The harness system provides secure restraint.

4.2 Forward-Facing Harness Mode

For toddlers weighing 22-65 lbs, the car seat can be positioned forward-facing. Adjust the harness and headrest to fit your child snugly, ensuring the harness straps are at or just above the child's shoulders.

4.3 Highback Booster Mode

This mode is for children weighing 40-100 lbs. In this mode, the car seat utilizes the vehicle's seat belt to secure the child. The car seat's internal harness should be stored in the designated compartment when using this mode.

Image: The 3-in-1 design allows the car seat to grow with your child.

5. Maintenance

Proper maintenance ensures the longevity and safety of your Graco Turn2Me car seat.

5.1 Cleaning Instructions

• Seat Pad: The seat pad is machine washable. Refer to the care instructions label sewn onto the seat pad for specific washing guidelines (e.g., cold water, gentle cycle, air dry).
• Harness Straps: Wipe harness straps with a damp cloth. Do not machine wash, bleach, or iron harness straps, as this may weaken them.
• Buckle: Clean the buckle by wiping with a damp cloth. Do not use detergents or lubricants.
• Metal and Plastic Parts: Wipe clean with mild soap and cool water. Do not use abrasive cleaners or solvents.

5.2 Harness Storage

When transitioning to the highback booster mode, the 5-point harness can be conveniently stored in the designated harness storage compartment within the car seat. This keeps the harness safely tucked away and prevents loss.

The fuss-free harness storage pockets also help keep the harness out of the way when placing or removing your child from the seat.

6. Troubleshooting

If you encounter issues with your Graco Turn2Me car seat, refer to the following common solutions:

• Harness too loose: Ensure the harness straps are properly routed through the correct slots for your child's height and the chest clip is positioned at armpit level. Pull the harness adjustment strap firmly to tighten.
• Car seat moves more than 1 inch after installation: Re-install the car seat, ensuring all slack is removed from the LATCH straps or vehicle seat belt. Apply firm pressure to the seat while tightening the belt/LATCH.
• Seat not rotating smoothly: Ensure there are no obstructions (e.g., crumbs, small toys) beneath the seat or in the rotation mechanism. Check that the car seat is not wedged against the vehicle seat or door.
• Buckle sticking: Flush the buckle with warm water and allow it to air dry. Do not use lubricants.

If problems persist, contact Graco Customer Service for further assistance.

7. Specifications

8. Warranty & Support

For detailed warranty information, product registration, or to contact customer support, please refer to the documentation included with your Graco Turn2Me car seat. You can also visit the official Graco website for the most up-to-date information and support resources. Please retain your proof of purchase for any warranty claims.