Introduction
The Graco TurboBooster 2.0 LX Highback Booster Seat is designed to provide comfort and safety for children aged 4-10 years old, weighing between 40-100 lb, and up to 57 inches tall. This versatile 2-in-1 seat transitions from a highback booster to a backless booster, adapting as your child grows. It features Graco's ProtectPlus system for enhanced safety and includes convenient features for both parents and children.
Image: The Graco TurboBooster 2.0 LX Highback Booster Seat in Gannon color, showcasing its full highback configuration.
Safety Information
Your child's safety is paramount. This booster seat is engineered with Graco's ProtectPlus system, which helps guard against frontal, rear, and rollover crashes. It includes EPS, energy-absorbing foam, for effective impact management. Always ensure your child meets the age, weight, and height requirements for safe use:
- Age: 4-10 years old
- Weight: 40-100 lb
- Height: Up to 57 inches tall
Always use the vehicle's lap and shoulder belt system with this booster seat. Refer to your vehicle's owner's manual for specific car seat installation instructions.
Image: A child seated in the Graco TurboBooster 2.0 LX, highlighting the ProtectPlus Engineered safety system designed for frontal, rear, and rollover crash protection.
Setup and Installation
The Graco TurboBooster 2.0 LX is designed for easy installation and adjustment.
Highback Booster Installation
- Place the booster seat on the vehicle seat.
- Connect the one-hand front-adjust LATCH system to your vehicle's lower anchors. Pull the strap to tighten the connection, securing the booster to the vehicle seat.
- Adjust the headrest to the appropriate height so the vehicle's shoulder belt rests correctly across your child's shoulder.
- Guide the vehicle's lap belt under the armrests and the shoulder belt through the open-loop belt guide.
Image: A hand demonstrating the simple, one-hand front-adjust LATCH system, which securely fastens the booster seat to the vehicle.
Adjusting the Headrest
The fully adjustable headrest offers versatile support and grows with your child. To adjust, locate the adjustment lever at the top of the headrest, squeeze, and slide the headrest up or down to the desired position.
Image: A detailed view of the height-adjustable headrest on the Graco TurboBooster 2.0 LX, designed to adapt to your growing child.
Converting to Backless Booster
For older children who meet the minimum requirements, the highback portion can be removed to convert the seat into a backless booster. Consult your instruction manual for detailed steps on safely detaching the backrest.
Image: Two children demonstrating the versatility of the Graco TurboBooster 2.0 LX, showing both the highback and backless booster modes of use.
Video: Assembly and First Look
Video: This video provides a step-by-step guide on assembling the Graco TurboBooster 2.0 LX and offers a first look at its features.
Operating and Features
The TurboBooster 2.0 LX is designed with convenience and comfort in mind for your child.
- Cup Holders: Integrated cup holders keep your child's drinks and snacks close at hand.
- Hideaway Storage: A convenient storage compartment is available to store small toys or essentials.
- Comfort Optimized: The seat features a fully adjustable headrest and full-coverage back support for maximum comfort during rides.
Image: A detailed diagram pointing out the various features of the Graco TurboBooster 2.0 LX, such as the height-adjustable headrest, EPS energy-absorbing foam, cup holder, machine-washable seat pad, front-adjust LATCH system, and hideaway storage compartment.
Image: The Graco TurboBooster 2.0 LX showcasing its practical cup holder and hideaway storage compartment, designed for big kid convenience.
Maintenance
Keeping your booster seat clean is simple with its removable, machine-washable seat pad. Always refer to the care tag on the seat pad for specific washing instructions.
Video: Easy to Clean
Video: This video illustrates the ease of cleaning Graco Highback Boosters, highlighting the removable and machine-washable components.
Specifications
| Maximum Weight Recommendation | 100 Pounds |
| Minimum Height Recommendation | 43 Inches |
| Minimum Weight Recommendation | 40 Pounds |
| Maximum Height Recommended | 57 Inches |
| Installation Type | Seat Belt |
| Orientation | Forward Facing |
| Harness Type | 3-Point |
| Number of Height Positions | 1 (Adjustable Headrest) |
| Item Dimensions D x W x H | 10.5"D x 19.84"W x 25.4"H |
| Item Weight | 9.15 Pounds |
| Material Type | Polyester |
| Color | Gannon |
Troubleshooting
If you encounter any issues with your Graco TurboBooster 2.0 LX, please refer to the following common troubleshooting tips:
- Loose Installation: Ensure the LATCH connectors are fully engaged and the strap is pulled tight. Wiggle the seat at the belt path; it should not move more than one inch side-to-side or front-to-back.
- Shoulder Belt Fit: The vehicle's shoulder belt should lie snugly across the center of your child's shoulder and chest, not on the neck or off the shoulder. Adjust the headrest height as needed.
- Lap Belt Fit: The lap belt should lie low across your child's hips, touching the thighs. Ensure it is not resting on the stomach.
- Difficulty Adjusting Headrest: Ensure the adjustment lever is fully squeezed before attempting to slide the headrest. Check for any obstructions.
For further assistance, please contact Graco customer support.
Warranty and Support
Graco products are designed for durability and safety. For specific warranty information regarding your TurboBooster 2.0 LX, please refer to the warranty card included with your product packaging or visit the official Graco website. For customer support, including product registration, replacement parts, or technical assistance, please visit the Graco support page or contact their customer service line.
Online Support: Graco Support Website