1. Product Overview
The IPORT Connect PRO Complete WallStation System is a comprehensive solution designed for integrating 10.2-inch iPads (9th, 8th, and 7th generations) into professional and residential environments. This system provides secure mounting, charging, and protection for your iPad, enabling seamless mobility and connectivity.
The system consists of two primary components: the Connect PRO Case for the iPad and the Connect PRO WallStation for wall mounting and charging.
2. System Components
2.1 Connect PRO Case
The Connect PRO Case is engineered to protect your iPad from drops and falls up to 2 meters while providing access to all iPad buttons, speakers, cameras, and microphones. It features a modular design allowing for future iPad generation compatibility without replacing electrical components. The case includes multiple charging interfaces for versatile power options.
Figure 1: Front view of an iPad securely housed within the IPORT Connect PRO Case.
Figure 2: Rear view of the IPORT Connect PRO Case, highlighting the conductive charging interface.
Figure 3: Side profile of the Connect PRO Case, illustrating the secure lock/unlock mechanism for iPad insertion and removal.
Figure 4: Detailed diagram outlining key features of the Connect PRO Case, including device accessibility, modular design, protective qualities, and multiple charging interfaces.
2.2 Connect PRO WallStation
The Connect PRO WallStation provides a robust magnetic mount for the iPad in its Connect PRO Case. It allows for charging at 5V 3A using the supplied power supply and a CAT-5 or CAT-6 cable. An optional PoE+ upgrade is available for enhanced power over Ethernet capabilities. The WallStation is designed to install into a universal 1G electrical box.
Figure 5: Front view of the IPORT Connect PRO WallStation, showing the magnetic charging surface.
Figure 6: Rear view of the IPORT Connect PRO WallStation, revealing the internal electronics and mounting points.
Figure 7: Diagram illustrating the features of the Connect PRO WallStation, including orientation options, charging pins, power input, and installation details.
3. Setup Instructions
3.1 Installing iPad into Connect PRO Case
- Ensure your iPad is a 10.2-inch model (9th, 8th, or 7th Generation).
- Unlock the case mechanism (refer to Figure 3 for the lock/unlock switch).
- Carefully insert your iPad into the Connect PRO Case, ensuring it seats correctly.
- Secure the iPad by engaging the lock mechanism on the case.
3.2 WallStation Installation
The WallStation requires professional installation into a standard 1G electrical box. It can be powered via the supplied 5V 3A power supply using a CAT-5 or CAT-6 cable, or upgraded with an optional PoE+ module for Power over Ethernet.
- Power Connection: Connect the appropriate power source to the WallStation. For standard power, use the supplied power supply and route a CAT-5 or CAT-6 cable. For PoE+, ensure a compatible PoE+ injector or switch is used.
- Mounting: Install the WallStation into a universal 1G electrical box. The mounting pattern is designed for a clean installation.
- Final Assembly: Secure the WallStation faceplate to the wall, ensuring all connections are firm.
Figure 8: An IPORT Connect PRO WallStation seamlessly integrated into a wall, showcasing its discreet design.
4. Operating Instructions
4.1 Mounting iPad to WallStation
Once your iPad is in the Connect PRO Case and the WallStation is installed, you can easily mount the iPad:
- Align the iPad (in its case) with the WallStation. The powerful magnetic mount will guide it into place.
- The iPad can be placed in either landscape or portrait orientation.
- Ensure the iPad makes full contact with the charging pins on the WallStation for proper charging.
4.2 Charging
When correctly mounted to the WallStation, your iPad will begin charging automatically. The system delivers 5V 3A charging to ensure your iPad is always ready for use.
5. Maintenance
To ensure the longevity and optimal performance of your IPORT Connect PRO system, follow these maintenance guidelines:
- Cleaning: Use a soft, dry, lint-free cloth to clean the Connect PRO Case and WallStation surfaces. Avoid abrasive cleaners, solvents, or aerosol sprays.
- Charging Contacts: Periodically inspect the charging contacts on both the case and the WallStation for any dust or debris. Clean gently with a dry cotton swab if necessary.
- Environmental Conditions: Operate the system within typical indoor environmental conditions. Avoid extreme temperatures or high humidity.
6. Troubleshooting
6.1 iPad Not Charging
- Check Connection: Ensure the iPad in its case is properly seated and making full contact with the WallStation's charging pins.
- Power Supply: Verify that the WallStation is receiving power. Check the power adapter connection or PoE+ source.
- Clean Contacts: Inspect and clean the charging contacts on both the case and WallStation for any obstructions.
6.2 iPad Not Mounting Securely
- Case Fit: Ensure the iPad is correctly installed and locked into the Connect PRO Case.
- WallStation Surface: Check for any foreign objects or damage on the WallStation's magnetic surface that might prevent a secure connection.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | iPort |
| Model | Connect PRO Complete WallStation System |
| Compatible Devices | iPads with a 10.2-inch screen (9th, 8th, and 7th generations) |
| Color | White |
| Form Factor | Case |
| Shell Type | Soft |
| Compatible Device Size Maximum | 10.2 Inches |
| Additional Features | Versatility in charging and connectivity with multi-generation iPad compatibility and robust protection |
| Water Resistance Level | Not Water Resistant |
| Enclosure Material | Soft Plastic |
| Charging Output | 5V 3A |
| Power Options | Supplied power supply (via CAT-5/6) or optional PoE+ |
8. Warranty Information
IPORT products are designed for durability and reliability. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official IPORT website. Keep your proof of purchase for warranty claims.
9. Customer Support
If you encounter any issues or have questions regarding your IPORT Connect PRO WallStation System, please contact IPORT customer support. Contact details can be found on the official IPORT website or in the product packaging.
