Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Defy Premium Curved Cookerhood Extractor Fan. Please read this manual thoroughly before using the appliance and retain it for future reference.
The Defy Premium Curved Cookerhood is designed to effectively remove airborne grease, fumes, smoke, odors, heat, and steam from your kitchen, ensuring a fresh and comfortable environment.
Safety Instructions
Always adhere to the following safety precautions to prevent injury or damage:
- Ensure the power supply matches the rating label on the cookerhood.
- Installation must be performed by a qualified technician in accordance with local regulations.
- Do not operate the cookerhood without filters in place.
- Regularly clean grease filters to prevent fire hazards.
- Do not flambé under the cookerhood.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Setup and Installation
Proper installation is crucial for optimal performance and safety. It is recommended that installation be carried out by a professional.
Components Overview
Familiarize yourself with the main components of your cookerhood:
Image: The Defy Premium Curved Cookerhood Extractor Fan, showcasing its stainless steel body, curved glass canopy, control panel, and two integrated lights above the grease filters.
- Main Body: Houses the motor, fan, and control panel.
- Curved Glass Canopy: Directs fumes towards the extraction area.
- Grease Filters: Removable metal filters to trap grease particles.
- Control Panel: Buttons for fan speed, light, and power.
- Lighting: Integrated lights for illuminating the cooking area.
- Ducting Outlet: Connection point for the exhaust duct.
Installation Steps (Summary)
- Mounting Height: Ensure the cookerhood is installed at the correct height above the cooking surface (refer to local building codes and product specifications for exact measurements, typically 65-75 cm above electric hobs and 75-85 cm above gas hobs).
- Wall Mounting: Securely mount the cookerhood to a sturdy wall using appropriate fixings.
- Ducting Connection: Connect the exhaust ducting to the outlet. Ensure the ducting is as short and straight as possible for efficient air extraction.
- Electrical Connection: Connect the cookerhood to a suitable power supply. This step must be performed by a qualified electrician.
- Filter Installation: Insert the grease filters correctly into their slots.
Operating Instructions
Your Defy cookerhood features an intuitive control panel for easy operation.
Control Panel Functions
The control panel typically includes the following buttons:
- Power Button: Turns the cookerhood on or off.
- Fan Speed Buttons (1, 2, 3): Adjusts the extraction power. Use lower speeds for light cooking and higher speeds for heavy cooking or strong odors.
- Light Button: Turns the integrated lights on or off.
Usage Tips
- Turn on the cookerhood a few minutes before you start cooking to create an air flow.
- Allow the cookerhood to run for 5-10 minutes after cooking to clear any remaining fumes and odors.
- For optimal performance, ensure windows and doors are not creating strong drafts that could interfere with air extraction.
Maintenance
Regular maintenance ensures the longevity and efficiency of your cookerhood.
Cleaning the Cookerhood
- Exterior: Clean the stainless steel and glass surfaces with a soft cloth and a non-abrasive cleaner specifically designed for these materials. Do not use harsh chemicals or abrasive pads.
- Interior: Wipe the interior surfaces with a damp cloth and mild detergent. Ensure the appliance is disconnected from power before cleaning.
Cleaning/Replacing Grease Filters
The metal grease filters should be cleaned regularly, typically every 2-4 weeks depending on usage, to maintain optimal performance and prevent grease build-up.
- Removal: Disconnect power. Locate the filter latches and release them to remove the filters.
- Cleaning: Wash the filters by hand in hot soapy water or in a dishwasher on a low-temperature cycle. Ensure they are completely dry before re-installing.
- Re-installation: Slide the dry filters back into their slots and secure the latches.
If your model uses charcoal filters (for recirculation mode), these cannot be washed and must be replaced every 3-6 months, depending on usage.
Troubleshooting
Refer to the table below for common issues and their potential solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Cookerhood not working | No power supply; Fuse blown; Power cord disconnected. | Check power connection; Check household fuse/circuit breaker; Ensure power cord is securely plugged in. |
| Poor extraction performance | Grease filters clogged; Ducting blocked or too long/bent; Fan speed too low. | Clean grease filters; Check ducting for obstructions and ensure it's correctly installed; Increase fan speed. |
| Lights not working | Bulb faulty; Loose connection. | Replace bulb (ensure correct type and wattage); Check electrical connections (by a qualified technician). |
| Excessive noise | Loose components; Obstruction in fan; Incorrect installation. | Check for loose screws or parts; Inspect fan for foreign objects; Consult installation manual or professional. |
If the problem persists after attempting these solutions, please contact Defy customer support.
Specifications
Key technical specifications for the Defy Premium Curved Cookerhood Extractor Fan (Model DCH321):
- Brand: Defy
- Model Number: DCH321
- Colour: Stainless Steel
- Size: 90 cm
- Item Weight: 12.5 kg
- Package Dimensions: 104 x 60 x 48 cm
- Type: Curved Cookerhood Extractor Fan
- Features: Optimal lighting, durable high-speed fan, compact installation.
Warranty and Support
For warranty information, please refer to the warranty card included with your product or visit the official Defy website. Keep your proof of purchase for any warranty claims.
For technical assistance, spare parts, or service requests, please contact Defy customer support:
- Defy Official Website: www.defy.co.za
- Customer Service: Refer to the website for local contact numbers and service centers.
When contacting support, please have your model number (DCH321) and serial number ready.
