Introduction
This manual provides detailed instructions for the Noise Airwave Bluetooth Neckband. Please read this guide thoroughly before using your device to ensure proper operation and to maximize its lifespan. Keep this manual for future reference.
Package Contents
Verify that all items are present in your package:
- 1x Noise Airwave Bluetooth Neckband
- 1x Charging Cable
- 2x Extra Eartips (pairs)
- 1x User Manual (this document)
Setup
1. Charging the Device
Before first use, fully charge your Noise Airwave neckband. Connect the provided charging cable to the charging port on the neckband and to a standard USB power adapter (not included).
- The LED indicator will show charging status.
- A full charge provides up to 50 hours of playtime.
Image: The Noise Airwave neckband highlighting its 50-hour battery life, indicating extended usage between charges.
2. Powering On/Off
- To Power On: Press and hold the Multi-function button until the LED indicator flashes.
- To Power Off: Press and hold the Multi-function button until the LED indicator turns off.
3. Bluetooth Pairing
- Ensure the neckband is powered off.
- Press and hold the Multi-function button for approximately 5 seconds until the LED indicator flashes red and blue alternately, indicating pairing mode.
- On your device (smartphone, laptop, tablet), enable Bluetooth.
- Search for "Noise Airwave" in the list of available devices.
- Select "Noise Airwave" to connect. Once connected, the LED indicator will flash blue slowly.
The neckband supports Bluetooth v5.3 for stable and efficient connectivity.
Operating Instructions
Basic Controls
| Function | Action |
|---|---|
| Play/Pause Music | Single press Multi-function button |
| Next Track | Long press Volume + button |
| Previous Track | Long press Volume - button |
| Volume Up | Short press Volume + button |
| Volume Down | Short press Volume - button |
| Answer/End Call | Single press Multi-function button |
| Reject Call | Long press Multi-function button |
| Activate Voice Assistant | Double press Multi-function button |
Environmental Noise Cancellation (ENC) for Calling
The Noise Airwave neckband features Environmental Noise Cancellation (ENC) to enhance call clarity by reducing background noise for the person on the other end of the call.
Image: Close-up of an earbud illustrating the Environmental Noise Cancellation (ENC) technology for clear calls.
EQ Modes (Tru Bass, Tru Balance, Tru Rock)
Customize your audio experience with three distinct EQ modes:
- Tru Bass: Enhances low-frequency sounds for a deeper bass experience.
- Tru Balance: Provides a balanced audio profile suitable for various music genres.
- Tru Rock: Optimizes sound for rock music, emphasizing specific frequencies.
To switch between EQ modes, refer to the specific button combination in your quick start guide or the NoiseFit App if applicable.
Image: Visual representation of the three EQ modes (Tru Rock, Tru Balance, Tru Bass) available on the Noise Airwave neckband.
Low Latency Mode (up to 50ms)
For gaming or video playback, the low latency mode minimizes audio delay, ensuring synchronized sound with visuals. This mode provides a lag-free experience up to 50ms.
Activation of low latency mode may be automatic or require a specific button press, consult the quick start guide for details.
