1. Introduction
This manual provides detailed instructions for the Uogic Stylus Pen AX10-T. Please read this manual carefully before using the product to ensure proper operation and to maximize its features. The Uogic Stylus Pen is designed to enhance your iPad experience with precision, responsiveness, and convenience.
Image: Uogic Stylus Pen AX10-T in Pale Purple.
2. Package Contents
Upon opening your Uogic Stylus Pen package, you should find the following items:
- 1 x Uogic Stylus Pen AX10-T
- 1 x USB-C Charging Cable
- 3 x Replacement Tips
- 1 x User Manual (this document)
Image: Contents of the Uogic Stylus Pen package, including the pen, USB-C cable, replacement tips, and user manual.
3. Compatibility
The Uogic Stylus Pen AX10-T is compatible with the following iPad models:
- iPad (6th, 7th, 8th, 9th, 10th generation)
- iPad mini (5th, 6th generation)
- iPad Air (3rd, 4th, 5th generation)
- iPad Air 11"/13" (M2)
- iPad Pro 11" (1st, 2nd, 3rd generation)
- iPad Pro 12.9" (3rd, 4th generation)
- iPad Pro 11"/13" (M4)
Note: Not compatible with iPad models from 2018 and earlier versions.
Image: A detailed compatibility chart listing various iPad models and their generations compatible with the stylus.
4. Setup
4.1 Charging the Stylus Pen
- Locate the USB-C charging port on the stylus pen, typically covered by a dust plug.
- Gently open the dust plug.
- Connect the provided USB-C cable to the charging port on the pen and to a compatible USB power source (e.g., computer, power bank, wall adapter).
- The LED indicators will illuminate to show the charging status.
- A full charge takes approximately 1 hour and provides up to 10 hours of continuous use.
Image: The Uogic Stylus Pen connected to a USB-C charging cable, illustrating the fast charging capability.
4.2 Powering On/Off
- To power on: Gently tap the top of the stylus pen once. A blue LED light will indicate it is on.
- To power off: Double-tap the top of the stylus pen. The blue LED light will turn off.
- Automatic Sleep Mode: The pen will automatically enter sleep mode after 5 minutes of inactivity to conserve battery life.
Image: Close-up of the stylus pen highlighting the function button (top), Type-C charging port, and light indicators.
5. Operating Instructions
5.1 Palm Rejection
The Uogic Stylus Pen features palm rejection technology, allowing you to rest your hand comfortably on the iPad screen while writing or drawing without causing unintended marks or interactions. No special gloves are required.
Image: A hand resting on an iPad screen while using the stylus, demonstrating palm rejection functionality.
5.2 Tilt Sensitivity
The stylus supports tilt sensitivity, enabling you to vary line thickness and shading by changing the angle at which you hold the pen against the screen. This feature provides a more natural and expressive drawing and writing experience.
Image: Illustration showing how different tilt angles of the stylus produce varying line thicknesses on the iPad screen.
5.3 Magnetic Attachment
The Uogic Stylus Pen features a built-in magnet that allows it to securely attach to the side of compatible iPad models. This provides convenient storage and portability, reducing the risk of misplacing the pen.
Image: The stylus pen magnetically adhering to the side of an iPad, indicating secure storage.
6. Maintenance
6.1 Replacing the Pen Tip
The stylus pen comes with replaceable POM tips. To replace a tip:
- Gently twist the existing tip counter-clockwise to remove it.
- Select a new tip and twist it clockwise until it is securely fastened. Do not overtighten.
6.2 Battery Care
To prolong battery life:
- Avoid fully discharging the battery frequently.
- Store the pen in a cool, dry place when not in use.
- Charge the pen regularly, even if not used for extended periods.
7. Troubleshooting
7.1 Pen Not Responding
- Ensure the pen is powered on (blue LED light should be visible).
- Check battery level and charge if necessary.
- Ensure your iPad is compatible with the stylus (refer to Section 3).
- Verify that the pen tip is securely attached.
- Restart your iPad and try again.
7.2 Inaccurate or Skipping Lines
- Ensure the pen tip is clean and free from debris.
- Replace the pen tip if it appears worn or damaged.
- Ensure your iPad screen is clean.
- Check for any screen protectors that might interfere with pen performance.
7.3 Magnetic Attachment Issues
- Ensure your iPad model supports magnetic attachment for styluses.
- Clean the magnetic strip on both the pen and the iPad to ensure a strong connection.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | AX10-T |
| Product Dimensions | 6.54 x 0.35 x 0.35 inches |
| Item Weight | 0.48 ounces |
| Battery Type | 1 Lithium Polymer battery (required) |
| Charging Time | Approximately 1 hour |
| Continuous Use Time | Up to 10 hours |
| Auto Sleep | After 5 minutes of inactivity |
| Tip Material | POM |
| Material | Aluminum |
| Color | Pale Purple (for this variant) |
9. Warranty and Support
UOGIC offers a 12-month warranty for the Stylus Pen AX10-T. If you encounter any issues or have questions regarding your product, please do not hesitate to contact UOGIC customer service. Support is available 24 hours a day to assist you.
For customer service inquiries, please refer to the contact information provided on the product packaging or the official UOGIC website.
