1. Introduction
Thank you for choosing the HIFIMAN SVANAR Wireless Jr earphones. These advanced in-ear earphones are designed to deliver high-fidelity audio with features such as active noise cancellation, Bluetooth 5.2 connectivity, an independent amplifier, and Topology Diaphragm technology. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
2. Safety Information
- Avoid listening at high volume levels for extended periods to prevent hearing damage.
- Do not use the earphones in situations where inability to hear ambient sounds could be dangerous, such as while driving or cycling.
- The earphones are IPX5 water resistant, meaning they are protected against low-pressure water jets. Do not submerge them in water or expose them to high-pressure water.
- Keep the device away from extreme temperatures, direct sunlight, and corrosive materials.
- Do not attempt to disassemble or modify the earphones or charging case. This will void the warranty.
3. Package Contents
Please verify that all items are present in your package:
- HIFIMAN SVANAR Wireless Jr Earbuds (Left and Right)
- Charging Case
- Silicone Ear Tips (8 pairs of various sizes)
- USB Charging Cable (Type-C)
- User Manual (this document)
4. Product Overview
The HIFIMAN SVANAR Wireless Jr earphones consist of two earbuds and a portable charging case. Each earbud features a Topology Diaphragm driver and an independent Class AB balanced headphone amplifier module for high-quality audio reproduction.



5. Setup
5.1 Charging the Earphones and Case
Before first use, fully charge the earphones and charging case. Connect the provided USB Type-C cable to the charging port on the case and to a power source. The indicator lights on the case will show the charging status. The earbuds will charge automatically when placed inside the case.
- Earbuds provide approximately 8 hours of listening time on a single charge.
- The charging case provides an additional 24 hours of battery life, allowing up to three full charges for the earbuds.
5.2 Bluetooth Pairing
To pair your SVANAR Wireless Jr earphones with a device:
- Ensure the earphones are charged and placed in the charging case.
- Open the charging case. The earphones will automatically enter pairing mode, indicated by a flashing light on the earbuds.
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "HIFIMAN SVANAR Wireless Jr" from the list of available devices.
- Once connected, a confirmation sound will play, and the indicator lights on the earbuds will stop flashing.
The earphones support Bluetooth 5.2 for stable and continuous connection with low latency, ensuring audio and video synchronization.
5.3 Proper Fit and Ear Tips
A proper fit is crucial for optimal sound quality and effective noise cancellation. Experiment with the 8 pairs of included silicone ear tips to find the size that provides a comfortable and secure seal in your ear canal.

The charging case is designed to accommodate most silicone tips, including larger sizes, eliminating the need to remove them before charging.
6. Operating Instructions
6.1 Touch Controls
The SVANAR Wireless Jr earphones feature intuitive touch controls on each earbud. Refer to the following table for specific functions:

| Gesture | Function |
|---|---|
| Double-click Left/Right Earbud | Rewind to previous track / Answer or End Call |
| Touch Left/Right Earbud (single tap) | Pause/Continue Playback |
| Triple-click Left/Right Earbud | Skip to next track |
| Press and hold either earbud for 3 seconds | Reject Call |
| Press and hold Left earbud for 3 seconds | Switch among Noise Cancellation / Transparency / High Fidelity Mode |
| Press and hold Right earbud for 3 seconds | Activate Voice Assistant (device must support this function) |
6.2 Noise Cancellation and Sound Modes
The SVANAR Wireless Jr offers three distinct listening modes:
- Noise Cancellation Mode: Reduces ambient noise by up to -35dB, providing a focused listening experience.
- Transparency Mode: Allows you to hear your surroundings while still enjoying your audio, enhancing situational awareness.
- High Fidelity Mode: Optimizes audio for the purest sound reproduction without active noise processing.
Cycle through these modes by pressing and holding the left earbud for 3 seconds.
6.3 LDAC HD Bluetooth Support
The earphones support LDAC HD Bluetooth format, enabling high-resolution audio transmission for a superior listening experience. Ensure your connected device also supports LDAC for optimal performance.

7. Maintenance
7.1 Cleaning
Regular cleaning helps maintain the performance and hygiene of your earphones:
- Gently wipe the earbuds and charging case with a soft, dry, lint-free cloth.
- Remove ear tips and clean them with mild soap and water, then rinse thoroughly and dry completely before reattaching.
- Ensure charging contacts on both the earbuds and case are clean and free of debris.
7.2 Water Resistance (IPX5)
The SVANAR Wireless Jr earphones are rated IPX5 water resistant. This means they are protected from low-pressure water jets from any direction. They are suitable for use during workouts or in light rain, but should not be submerged in water or exposed to strong water streams.

8. Troubleshooting
If you encounter issues with your SVANAR Wireless Jr earphones, please refer to the following common solutions:
- No Sound:
- Ensure earphones are charged.
- Verify Bluetooth connection to your device.
- Check device volume and earphone volume.
- Pairing Issues:
- Place earbuds back in the case, close, then reopen to re-enter pairing mode.
- Forget the device in your phone's Bluetooth settings and attempt to re-pair.
- Ensure no other devices are actively connected to the earphones.
- Charging Problems:
- Ensure the charging cable is securely connected to both the case and power source.
- Clean the charging contacts on both earbuds and the case.
- Try a different USB-C cable or power adapter.
- Noise Cancellation Not Effective:
- Ensure a proper seal with the correct size ear tips.
- Verify that Noise Cancellation Mode is active via touch controls.
If problems persist, please contact HIFIMAN customer support.
9. Specifications
| Feature | Specification |
|---|---|
| Model Name | SVANAR Wireless Jr |
| Connectivity Technology | Wireless (Bluetooth 5.2) |
| Bluetooth Range | 10 Meters |
| Audio Driver Type | Topology Diaphragm |
| Amplifier | Independent Class AB Balanced Headphone Amplifier Module |
| Frequency Range | 10Hz-35kHz |
| Noise Control | Active Noise Cancellation (up to -35dB) |
| Water Resistance Level | IPX5 |
| Earbud Battery Life | 8 Hours |
| Total Battery Life (with case) | 32 Hours |
| Control Method | Touch |
| Compatible Devices | Smartphones, Laptops, Tablets, Smart TVs, Cars (with Bluetooth support), LDAC-compatible devices |
| Item Weight (Earbuds) | Approximately 99.7 Grams (total product weight) |
10. Warranty and Support
HIFIMAN products are covered by a limited warranty. For detailed warranty information, product support, or service inquiries, please refer to the warranty card included in your package or visit the official HIFIMAN website. Please retain your proof of purchase for warranty claims.





