JOYMOR Twin Bassinet TBB1G Instruction Manual

1. Introduction

Thank you for choosing the JOYMOR Twin Bassinet TBB1G. This versatile product is designed to provide a safe and comfortable sleeping and playing environment for your infants. It can be configured as a twin bassinet, a bedside sleeper, or a playpen, adapting to your babies' growth stages. This manual contains important information regarding assembly, operation, maintenance, and safety. Please read it thoroughly before use and retain it for future reference.

Image 1: JOYMOR Twin Bassinet TBB1G in full assembly.

2. Important Safety Warnings

Failure to follow these warnings and instructions could result in serious injury or death. Always ensure the safety of your child by adhering to the guidelines below:

• Suffocation Hazard: Infants can suffocate in gaps between an extra mattress and the side of the bassinet/playpen, or on soft bedding. Use ONLY the mattress provided by the manufacturer. NEVER add a pillow, comforter, or another mattress for padding.
• Fall Hazard: Stop using the bassinet when the infant begins to push up on hands and knees, or has reached 18 lbs (8.1 kg), or is 33 inches (84 cm) tall, whichever comes first.
• Strangulation Hazard: Keep cords, strings, and ribbons away from the child. Do not place the bassinet near windows where cords from blinds or drapes could strangle a child.
• Always ensure all locking mechanisms are securely engaged before placing a child in the bassinet or playpen.
• Never leave your child unattended. Always keep an eye on your child.
• Ensure the product is placed on a flat, level surface.
• Regularly inspect the product for damaged hardware, loose joints, missing parts, or sharp edges. Do not use if any parts are missing or broken.

3. Package Contents

Please verify that all components are present before assembly:

• Main Bassinet/Playpen Frame
• Mattress
• Replacement Sheet
• 2 x Rock-A-Bye Portable Bassinets
• Storage Organizer
• Support Bars for Bassinet Level

4. Setup Instructions

Follow these steps to assemble your JOYMOR Twin Bassinet. For a visual guide, please refer to the assembly video below.

4.1 Main Frame Assembly

1. Remove the mattress from the folded frame.
2. Lift the side rails upwards. Ensure the frame is in a half-open status, with the bottom of the frame raised up, then lift each side rail until it locks into place.
3. Press down the middle frame to the bottom until it is completely stable.
4. Zip up the middle layer of the bassinet.
5. Insert the support bars into the designated slots on the middle layer.
6. Place the mattress on top of the installed support bars.

4.2 Attaching the Storage Organizer

1. Slide the plastic hooks of the organizer into the openings on the top left and right sides of the bassinet frame until they are fully engaged.
2. Fasten the plastic hooks securely onto any rail of the bassinet.

4.3 Portable Bassinet Assembly and Attachment

1. Assemble the frame for each portable bassinet by unfolding and locking the components.
2. Attach the fabric bassinet portion to its frame, ensuring all clips and zippers are secured.
3. Securely attach each portable bassinet to the top rails of the main bassinet frame using the integrated clips. Ensure they are firmly in place before use.

5. Operating Modes

The JOYMOR Twin Bassinet offers multiple configurations to suit your needs:

5.1 Twin Bassinet Mode

In this mode, both portable bassinets are attached to the main frame, providing individual sleeping spaces for two infants. This setup is ideal for newborns and young infants.

Image 2: Twin Bassinet mode, providing separate sleeping areas for infants.

5.2 Bedside Sleeper Mode

To use as a bedside sleeper, remove the portable bassinets. The main frame can be positioned next to your bed, and one side can be lowered to allow easy access to your baby. Ensure the bassinet is securely fastened to your bed using the provided straps (if applicable) and that there are no gaps between the bassinet and your mattress.

Image 3: Bedside Sleeper mode, allowing close proximity to your baby.

5.3 Playpen Mode

Once your infants outgrow the bassinet level (typically around 6 months or when they can push up on hands and knees), remove the portable bassinets and the elevated mattress support. The main frame then functions as a spacious playpen, offering a secure area for play. The zippered door allows older babies to crawl in and out independently.

Image 4: Playpen mode, suitable for older infants and toddlers.

5.4 Portable Rock-A-Bye Bassinets

The two individual bassinets can be detached and used independently. They feature a rocking function to soothe your baby and can be locked for stability. This allows for easy portability around the house or outdoors.

Image 5: Portable Rock-A-Bye Bassinet in use.

6. Maintenance and Care

Proper maintenance ensures the longevity and hygiene of your bassinet:

• Cleaning: The replacement sheet and other fabric components are removable and washable. Hand wash only with mild soap and cold water. Do not bleach. Air dry.
• Frame Cleaning: Wipe the metal and plastic parts with a damp cloth and mild soap. Dry thoroughly.
• Storage: When not in use, fold the bassinet according to the instructions and store it in a dry, cool place.

Image 6: Easy cleaning with removable and washable components.

7. Troubleshooting

If you encounter issues during assembly or use, refer to the common problems and solutions below:

7.1 Side Rails Not Locking

If the long or short side rails refuse to lock into place, it is often because the bottom of the frame is not fully raised or the central mechanism is not correctly positioned.

• Solution: Ensure the bassinet is in a partially folded state, with the bottom raised. Pull the red rope upwards to lift the bottom of the frame, then lift the side rail upwards firmly until it clicks and locks into place. Repeat for all sides. Once all sides are locked, push the middle frame down to the bottom to secure the structure.

8. Specifications

9. Warranty and Support

For specific warranty information regarding your JOYMOR Twin Bassinet TBB1G, please refer to the documentation included with your purchase or contact JOYMOR customer support directly. If you require assistance with assembly, parts, or have any questions, please reach out to the manufacturer for support.

Manufacturer: JOYMOR