1. Safety Instructions
Always read and understand all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.
- Electrical Safety: Ensure the power supply matches the voltage specified on the dust extractor. Do not operate in wet conditions or near flammable liquids/gases.
- Personal Protective Equipment (PPE): Always wear appropriate PPE, including safety glasses, hearing protection, and a dust mask, especially when working with fine dust.
- Proper Use: Use the dust extractor only for its intended purpose. Do not use it to pick up hot ashes, sharp objects, or hazardous materials without proper precautions.
- Maintenance: Disconnect from power before performing any maintenance or cleaning. Regularly inspect the hose, filters, and power cord for damage.
2. Product Overview
The Fein Turbo II X AC PRO is a high-performance wet/dry dust extractor designed for professional use. It features a powerful motor, automatic filter cleaning, and HEPA filtration for efficient dust and liquid collection. Its robust construction and thoughtful design ensure durability and ease of use in demanding environments.
A worker uses the Fein Turbo II X AC PRO wet/dry dust extractor to clean a tiled floor, demonstrating its powerful suction for general cleanup.
3. Setup and Assembly
Follow these steps to set up your Fein Turbo II X AC PRO dust extractor:
- Unpacking: Carefully remove all components from the packaging. Inspect for any damage.
- Filter Installation: Ensure the HEPA filter is correctly installed. For dry vacuuming, a filter bag is recommended.
- Hose Connection: Attach the anti-static suction hose to the inlet port on the front of the unit. Ensure a secure connection.
- Accessory Attachment: Connect the desired accessory (e.g., extension tubes, floor nozzle) to the end of the suction hose.
- Power Connection: Plug the power cord into a suitable electrical outlet.
This image highlights the premium HEPA filter feature of the Fein Turbo II X AC PRO, essential for capturing fine dust particles and maintaining air quality.
This video demonstrates the setup process for the Fein Turbo I (similar to Turbo II X AC PRO), including filter installation, hose connection, and power tool integration. It also showcases the unit's high suction power, low noise level, and mobility.
4. Operating Instructions
The Fein Turbo II X AC PRO offers versatile operation for various cleaning tasks:
- Power On/Off: Use the main power switch to turn the unit on or off.
- Autostart Function: For synchronized operation with power tools, plug your tool into the integrated autostart outlet. The dust extractor will activate automatically when the power tool is switched on, with a slight delay to prevent current overload.
- Wet Vacuuming: When vacuuming liquids, ensure the filter bag is removed and the HEPA filter is suitable for wet use or replaced with a wet filter. Monitor the liquid level to prevent overfilling.
- Dry Vacuuming: For dry debris, use the HEPA filter and a disposal bag for optimal collection and easy disposal.
- Suction Control: Adjust the suction power using the rotary knob on the control panel to match the task requirements.
The Fein Turbo II X AC PRO dust extractor is connected to a power tool, actively collecting dust during a woodworking task, highlighting its integration with other tools.
This video demonstrates the setup process for the Fein Turbo I (similar to Turbo II X AC PRO), including filter installation, hose connection, and power tool integration. It also showcases the unit's high suction power, low noise level, and mobility.
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your dust extractor:
- Automatic Filter Cleaning (AC): The unit features a fully automatic filter cleaning system. This system periodically pulses to dislodge dust from the filter, maintaining consistent suction.
- Filter Replacement: Replace the HEPA filter periodically or when suction significantly decreases despite automatic cleaning. Refer to the filter type for specific replacement intervals.
- Disposal Bag: For dry vacuuming, use disposal bags. Replace them when full to prevent loss of suction and maintain hygiene.
- Cleaning the Container: Empty and clean the collection container regularly, especially after wet vacuuming, to prevent odors and bacterial growth.
- Accessory Storage: Utilize the practical accessory storage on the unit to keep tools organized and protected.
The image shows the Fein Turbo II X AC PRO dust extractor, emphasizing its fully automatic filter cleaning system, which helps maintain optimal suction and extends filter life.
The dust extractor features practical on-board storage for accessories, keeping them organized and readily accessible during use.
6. Troubleshooting
If you encounter issues with your Fein Turbo II X AC PRO, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord unplugged, tripped circuit breaker, faulty outlet. | Check power connection, reset circuit breaker, try a different outlet. |
| Loss of suction | Clogged hose/nozzle, full filter bag, dirty HEPA filter, container full (wet vacuuming). | Clear obstructions, replace filter bag, clean/replace HEPA filter, empty container. |
| Unusual noise | Foreign object in impeller, loose components, motor issue. | Disconnect power and inspect for foreign objects. If noise persists, contact customer support. |
| Dust escaping | Improperly installed filter, damaged filter, loose hose connection. | Ensure filter is seated correctly, replace damaged filter, tighten hose connections. |
7. Specifications
Key technical specifications for the Fein Turbo II X AC PRO:
| Feature | Specification |
|---|---|
| Brand | Fein |
| Model Name | Turbo II X AC PRO |
| Capacity | 9.2 Gallons (approx. 34.8 Liters) |
| Airflow (CFM) | 153 CFM |
| Static Water Lift (PSI) | 98 PSI (approx. 245 mbar) |
| Motor Horsepower | 1.47 HP |
| Filter Type | HEPA Filter |
| Hose Length | 13 Feet |
| Power Cord Length | 25 Feet |
| Noise Level | 70 Decibels |
| Product Dimensions | 10"L x 10"W x 10"H (Note: These dimensions seem generic and may not reflect the actual product size accurately.) |
| Item Weight | 25 pounds |
| Included Components | Accessory Kit (HEPA filter, anti-static suction hose, metal extension tubes, disposal bag, crevice nozzle, dusting brush, combination tool with inserts, elbow) |
This graphic illustrates the key benefits of the Fein Turbo II X AC PRO: powerful suction (153 CFM, 98.4 Static Waterlift), easy 360-degree rotation, and a large 9.2-gallon container volume.
A visual representation of the comprehensive accessory kit provided with the dust extractor, including metal extension tubes, a combination nozzle, crevice nozzle, elbow, and dusting brush for diverse cleaning needs.
A detailed diagram showcasing a range of additional accessories available for Fein Turbo dust extractors, including different filter bags, hoses, and specialized nozzles, all sold separately.
8. Warranty and Support
Fein products are manufactured to the highest quality standards. For warranty information and customer support, please refer to the official Fein website or contact their customer service department.
Warranty: This product typically comes with a manufacturer's warranty covering defects in materials and workmanship. Specific terms and duration may vary by region and purchase date. Please retain your proof of purchase for warranty claims.
Customer Support: For technical assistance, spare parts, or service, please visit the Fein Store on Amazon or the official Fein website. You can also find contact information for your local service center there.
