Powell PAMZN2358
Powell Conolly Dining Side Chair User Manual
Model: PAMZN2358
Introduction
Thank you for choosing the Powell Conolly Dining Side Chair. This all-wood chair features a distinctive X-back design and a crisp, bright white finish, designed to complement various dining spaces. This manual provides essential information for assembly, safe use, and maintenance of your new chair.
Safety Information
WARNING:
- For safe use, ensure to assemble this chair properly according to the instructions provided.
- This chair is designed for users up to 250 pounds (approximately 113 kg). Do not exceed this weight limit.
- It is recommended for use on hard floor surfaces.
- Regularly check all bolts and screws to ensure they are tight. Retighten as necessary.
- Do not stand on the chair.
- Keep small parts away from children during assembly.
Product Overview
The Powell Conolly Dining Side Chair is constructed from solid Acacia Wood and Rubberwood, ensuring durability and stability. Its design features a unique X-back and a clean white finish.
Key Features:
- Crafted from Solid Acacia Wood and Rubberwood.
- Chair back accented with a distinctive wood X-design.
- Pure white finish for a light and airy aesthetic.
- Designed for dining room use.
Figure 1: Front view of the Conolly Dining Side Chair, highlighting its X-back design and white finish.
Figure 2: The Conolly Dining Side Chair positioned in a dining room, demonstrating its aesthetic integration.
Setup and Assembly
The Powell Conolly Dining Side Chair requires assembly. Please follow these steps carefully. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.
Package Contents:
- Chair Back (1)
- Chair Seat (1)
- Front Legs (2)
- Back Legs (2)
- Side Stretchers (2)
- Front Stretcher (1)
- Hardware Pack (Bolts, Washers, Allen Wrench)
Assembly Steps:
- Attach Front Legs to Seat: Carefully align the two front legs with the pre-drilled holes on the underside of the chair seat. Secure them using the provided bolts and washers. Do not fully tighten yet.
- Attach Back Legs to Seat and Back: Connect the two back legs to the chair seat and the chair back. Ensure the X-back design faces the correct direction. Secure with bolts and washers. Do not fully tighten.
- Install Stretchers: Attach the side stretchers between the front and back legs on each side. Then, attach the front stretcher between the two front legs. Secure all stretchers with the appropriate hardware.
- Final Tightening: Once all components are loosely assembled, place the chair upright on a flat, level surface. Apply gentle downward pressure to ensure all parts are properly seated. Systematically tighten all bolts using the Allen wrench until secure. Do not overtighten.
- Inspect: Verify that the chair is stable and all connections are firm before use.
Figure 3: Key dimensions of the Conolly Dining Side Chair, useful for assembly and placement.
Operating Instructions
The Conolly Dining Side Chair is designed for comfortable seating at dining tables. Ensure the chair is placed on a stable, level surface before use. Sit centrally on the seat and avoid leaning excessively to one side or on the backrest to maintain stability and prevent damage.
Maintenance and Care
Proper care will extend the life and appearance of your chair.
- Cleaning: Wipe clean with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
- Spills: Blot spills immediately with a clean, dry cloth.
- Sunlight Exposure: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration of the wood finish.
- Humidity: Maintain a consistent humidity level in the room to prevent wood from cracking or warping.
- Hardware Check: Periodically check all assembly hardware (bolts, screws) and tighten if necessary to ensure the chair remains stable and secure.
- Moving the Chair: Always lift the chair when moving it. Do not drag it across the floor, as this can damage the legs or the floor surface.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair wobbles after assembly. | Uneven tightening of bolts or uneven floor surface. | Loosen all bolts slightly, place the chair on a flat surface, apply gentle downward pressure, then retighten all bolts evenly. If the floor is uneven, consider using furniture pads or shims. |
| Loose joints or creaking sounds. | Hardware has loosened over time. | Inspect all bolts and screws. Tighten any loose hardware using the provided Allen wrench. |
| Scratches on floor. | Chair being dragged or lack of protective pads. | Always lift the chair when moving it. Apply felt pads to the bottom of the chair legs to protect floor surfaces. |
Specifications
| Attribute | Detail |
|---|---|
| Brand | Powell |
| Model Name | Conolly White Dining Side Chair |
| Item Model Number | PAMZN2358 |
| Color | White |
| Material | Solid Acacia Wood and Rubberwood |
| Back Style | Cross Back (X-design) |
| Product Dimensions | 30 x 17.75 x 30 inches (Length x Width x Height) |
| Item Weight | 15.4 pounds (approximately 7 kg) |
| Maximum Weight Recommendation | 250 Pounds (approximately 113 kg) |
| Unit Count | 1.0 Count (Ships one chair per carton) |
| Country of Origin | Vietnam |
| UPC | 081438805085 |
Warranty and Support
For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official Powell Furniture website. For any questions, missing parts, or assistance with assembly, please contact Powell customer support.
Powell Customer Support:
- Website: www.powellcompany.com
- Contact Information: Refer to the website for the most current contact details (phone, email, or contact form).
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.