1. Introduction
Thank you for choosing the SANODESK S1Q Electric Standing Desk. This desk is designed to provide a versatile and ergonomic workspace, allowing you to easily switch between sitting and standing positions. Its robust construction and intelligent features aim to enhance your comfort and productivity. Please read this manual thoroughly before assembly and operation to ensure safe and correct use of your new desk.
Image: The SANODESK S1Q Electric Standing Desk, showcasing its minimalist design and ample workspace, equipped with dual monitors and a comfortable chair.
2. Safety Instructions
To ensure safe operation and prolong the lifespan of your SANODESK S1Q, please observe the following safety guidelines:
- Ensure all components are securely fastened before use.
- Keep children and pets away from the desk during operation to prevent injury.
- Do not overload the desk. The maximum weight capacity is 70 kg (154 lbs).
- Avoid placing liquids directly on the control panel or motor components.
- Do not disassemble or modify the desk's electrical components. Contact qualified personnel for repairs.
- Ensure there are no obstructions in the desk's path during height adjustment. The anti-collision system is designed to prevent damage, but manual checks are recommended.
- Only use the power adapter supplied with the desk.
Image: Detail of the desk's safe round corner design and environmental certifications (CARB, TSCA Title VI), highlighting product safety and quality.
3. Assembly Instructions
While the SANODESK S1Q is designed for straightforward assembly, it is recommended to have two people for certain steps. Please ensure all parts are present before beginning.
3.1 Package Contents
Before assembly, verify that you have received all the following components:
- Desktop Surface (1)
- Leg Columns (2)
- Feet (2)
- Control Box (1)
- Handset/Control Panel (1)
- Power Adapter (1)
- Power Cable (1)
- Hardware Kit (screws, Allen wrenches, cable ties)
3.2 Assembly Steps
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Attach Feet to Leg Columns: Securely fasten the feet to the bottom of each leg column using the provided screws.
- Attach Leg Columns to Desktop: Place the desktop upside down. Attach the leg columns to the pre-drilled holes on the underside of the desktop. Ensure they are aligned correctly.
- Install Control Box: Mount the control box to the designated area under the desktop using the provided screws.
- Connect Cables: Connect the motor cables from the leg columns to the control box. Connect the handset cable to the control box. Finally, connect the power adapter to the control box.
- Mount Handset: Attach the control panel to the front edge of the desktop in a comfortable position.
- Cable Management: Use the included cable ties to organize and secure all cables, preventing them from dangling or getting caught.
- Flip the Desk: With assistance, carefully flip the desk upright onto its feet.
- Initial Power-Up: Plug the power cable into a wall outlet.
4. Operating Instructions
The SANODESK S1Q features an intuitive control panel for easy height adjustment and memory functions.
Image: The smart controller of the SANODESK S1Q, showing the clearly labeled buttons for height adjustment, reset, and two memory presets for sitting and standing positions.
4.1 Basic Height Adjustment
- Press and hold the Up (▲) button to raise the desk.
- Press and hold the Down (▼) button to lower the desk.
- Release the button at your desired height.
Image: Comparison of two SANODESK desks demonstrating the height adjustment range from a minimum of 71 cm to a maximum of 116 cm, accommodating various user heights.
4.2 Memory Presets
The control panel features two memory preset keys (labeled with a sitting and standing icon) to store your preferred sitting and standing heights.
- Set a Memory Position:
- Adjust the desk to your desired height using the Up/Down buttons.
- Press the "M" button (or the button with a circle icon, depending on model variation) once. The display will show "S-".
- Within 3 seconds, press one of the preset buttons (sitting or standing icon). The display will show "S-1" or "S-2" to confirm the height is saved.
- Recall a Memory Position:
- Simply press the desired preset button (sitting or standing icon). The desk will automatically move to the saved height.
4.3 Reset Function
If the desk encounters an error or does not operate correctly, a reset may be required.
- Press and hold the Reset (R) button (or the button with a circle icon, if it functions as reset) for approximately 5 seconds until the desk moves to its lowest position and then slightly back up. Release the button. The desk is now reset.
4.4 Anti-Collision System
The SANODESK S1Q is equipped with an anti-collision system to prevent damage. If the desk encounters an obstruction during height adjustment, it will automatically stop and reverse slightly. Remove the obstruction before resuming operation.
The desk operates with an ultra-quiet motor, typically below 51 dB, ensuring a distraction-free environment.
Image: A visual representation of the desk's quiet operation, indicating noise levels below 50 dB, which is quieter than typical office sounds.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your desk.
- Cleaning: Wipe the desktop and frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
- Cable Management: Periodically check and reorganize cables to prevent tangles and damage.
- Fasteners: Occasionally check all screws and bolts to ensure they are tight. Retighten if necessary.
- Motor Inspection: Listen for any unusual noises during operation. If you detect any, discontinue use and contact support.
6. Troubleshooting
If you encounter issues with your SANODESK S1Q, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move. | Power cable disconnected, control box issue, motor issue. | Check power connections. Perform a reset (see Section 4.3). If problem persists, contact support. |
| Desk moves unevenly or makes unusual noise. | Overload, loose connections, obstruction. | Reduce weight on desk. Check all connections. Perform a reset. Ensure no obstructions. |
| Anti-collision system triggers frequently. | Obstruction in path, sensor sensitivity. | Ensure clear path for desk movement. |
| Memory presets not working. | Presets not saved correctly. | Re-save your desired memory positions (see Section 4.2). |
7. Specifications
Key technical specifications for the SANODESK S1Q Electric Standing Desk:
- Model Name: Set EP1E
- Brand: SANODESK
- Desktop Dimensions: 110 cm x 60 cm (approximately 43.31 x 23.62 inches)
- Height Adjustment Range: 71 cm (28 inches) to 117 cm (46 inches)
- Maximum Weight Capacity: 70 kg (154 lbs)
- Noise Level: Below 51 dB
- Color: Black
- Features: Electric height adjustment, 2 memory presets, anti-collision system, quiet operation.
- GTIN/UPC: 810072847669
- ASIN: B0CMPSX4TN
Image: The SANODESK S1Q demonstrating its robust build and 60kg load capacity, indicating strong support for various office equipment.
8. Warranty & Support
SANODESK is committed to providing high-quality products. For warranty information, technical support, or any questions regarding your S1Q Electric Standing Desk, please refer to the contact information provided at the point of purchase or visit the official SANODESK website.
Please have your model number (Set EP1E) and ASIN (B0CMPSX4TN) ready when contacting support.