Important Safety Information
Please read all instructions carefully before assembling, installing, or operating your fountain. Keep this manual for future reference.
- Electrical Safety: Always disconnect the power supply before performing any maintenance or assembly. Ensure the power cord is not damaged and is placed where it cannot be tripped over or damaged. Use a ground fault circuit interrupter (GFCI) for outdoor use.
- Water Safety: Use clean water only. Do not allow children or pets to drink from the fountain. Regularly check water levels to prevent pump damage.
- Placement: Place the fountain on a level, stable surface to prevent tipping. Ensure the fountain is not exposed to extreme weather conditions that could cause damage.
- Handling: The fountain is made of resin and fiberglass. Handle with care to avoid cracks or breakage.
Product Overview
The watnature 38.7-inch Tall Water Urn Fountain features a modern jar design with contemporary curves and integrated LED lights. Constructed from durable resin and fiberglass, it is designed for both indoor and outdoor use, providing a calming ambiance with its circulating water flow.
Image: The watnature 38.7-inch Tall Water Urn Fountain, showcasing its modern design and blue finish.
Package Contents
Verify that all components are present before beginning assembly:
- Fountain Unit (Urn structure)
- Water Pump
- LED Lights (pre-installed or separate)
- Power Adapter
- Instruction Manual
Assembly and Setup
- Unpack Components: Carefully remove all items from the packaging and place them on a clean, flat surface. Inspect for any damage.
- Position the Fountain: Place the fountain unit in your desired location, ensuring it is on a stable, level surface and near a suitable power outlet.
- Connect the Pump: Locate the water pump and the tubing inside the fountain. Connect the pump to the end of the tubing. Ensure a secure fit.
- Connect LED Lights: If the LED lights are not pre-installed, connect them according to the diagram provided with the light kit. Ensure all electrical connections are dry and secure.
- Add Water: Fill the fountain reservoir with distilled or clean tap water. Ensure the water level is sufficient to completely submerge the pump. Do not overfill.
- Adjust Water Speed (Optional): The pump may have an adjustable flow control switch. Set it to a medium flow initially.
- Plug In: Connect the power adapter to the fountain's power cord, then plug the adapter into a standard electrical outlet. The fountain should begin operating.
Image: Diagram showing the dimensions of the watnature 38.7-inch Tall Water Urn Fountain (11.4"W x 13.5"L x 38.7"H).
Video: A demonstration of the watnature Tall Outdoor Water Fountain in operation, highlighting its water flow and design.
Operating Instructions
- Power On/Off: Plug the power adapter into an electrical outlet to turn the fountain on. Unplug it to turn the fountain off.
- Adjust Water Flow: The pump includes an adjustable flow control. Turn the dial on the pump to increase or decrease the water flow rate. It is recommended to start with the pump about halfway open to prevent excessive splashing.
- LED Lights: The integrated LED lights will illuminate automatically when the fountain is powered on, enhancing the visual appeal, especially in low-light conditions.
Image: A close-up view of the water flowing down the textured surface of the fountain, illuminated by internal LED lights.
Maintenance
- Water Level: Check the water level daily, especially in warm weather, and refill as needed to ensure the pump remains fully submerged. Low water levels can damage the pump.
- Cleaning: Periodically clean the fountain and pump to prevent mineral buildup and algae growth. Disconnect power, drain the water, and use a soft brush and mild soap to clean surfaces. Rinse thoroughly.
- Pump Cleaning: Disassemble the pump (refer to pump manufacturer's instructions if available) and clean any debris from the impeller and intake screen.
- Winterization (Outdoor Use): Before freezing temperatures, disconnect power, drain all water from the fountain and pump. Clean and dry the pump, then store it indoors. Cover the fountain or store it indoors to protect it from ice damage.
Image: A detailed view of the integrated LED lights within the fountain's design, highlighting their placement and effect.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fountain not running | No power; Pump clogged; Low water level | Check power connection and GFCI. Clean pump impeller and intake. Add water to submerge pump. |
| Water flow is weak | Pump clogged; Water level too low; Flow control set too low | Clean pump. Add water. Adjust pump flow control to a higher setting. |
| Excessive splashing | Water flow too high; Uneven surface | Adjust pump flow control to a lower setting. Ensure fountain is on a level surface. |
| LED lights not working | Loose connection; Damaged lights | Check all light connections. If lights are damaged, contact customer support for replacement. |
| Water leakage | Hairline crack; Improper assembly; Seal issue | Inspect fountain for visible cracks. Ensure all connections are tight. If a crack is found, contact customer support. |
Specifications
- Brand: watnature
- Model: 38.7-inch Tall Urn Fountain
- Product Dimensions: 13.5"L x 11.4"W x 38.7"H
- Material: Resin and Fiberglass
- Color: Blue
- Power Source: Corded Electric
- Special Features: Fade Resistant, Lighted, Rust Resistant, UV Resistant, Weather Resistant
Warranty and Support
For warranty information, technical support, or replacement parts, please contact watnature customer service through the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.
For general inquiries, visit the watnature Store on Amazon.
