Introduction
The BETOWEY TK-X2 Motorcycle Intercom is a helmet Bluetooth headset designed for clear communication and entertainment during rides. Featuring Bluetooth V5.0 and DSP technology, it offers high-fidelity audio and effective noise suppression. This device supports hands-free calls, FM radio, GPS navigation, and an intercom system for communication with other riders.
What's in the Box
Verify that all components are present in your package:
- Intercom Headset (TK-X2 units)
- Microphone & Speaker Set (includes both soft and hard microphone options)
- Mounting Accessories (clips, adhesive mounts)
- User Manual
- USB Type-C Charging Cable
Image: Components included in the TK-X2 package. This shows the two intercom units, two sets of speakers and microphones (both soft and hard), mounting clips, adhesive pads, USB cables, and the user manual.
Setup and Installation
Choosing a Microphone
The TK-X2 comes with two microphone options to suit different helmet types:
- Soft Microphone: Ideal for full-face helmets, where the microphone can be positioned close to the mouth inside the helmet.
- Hard Microphone: Suitable for open-face or modular helmets, where the microphone boom can extend to the mouth area.
Image: Illustration of the two microphone types (soft and hard) and their recommended helmet applications.
Mounting the Intercom Unit
There are two primary methods for mounting the TK-X2 unit to your helmet:
- Method 1 (Clip Mount):
Secure the clip mount to the edge of your helmet shell. This method is generally more secure and allows for easy removal of the intercom unit.
- Method 2 (Adhesive Mount):
Attach the adhesive mount to a flat, clean surface on your helmet. This method is suitable for helmets where a clip mount may not fit or is preferred for a more permanent attachment.
Ensure the mounting location allows for easy access to the buttons and does not obstruct your vision or helmet functionality.
Image: Step-by-step guide for both clip and adhesive mounting methods for the TK-X2 intercom unit on a helmet.
Operating Instructions
Power On/Off
- Power On: Press and hold the Power button for approximately 3 seconds until the indicator light illuminates.
- Power Off: Press and hold the Power button for approximately 3 seconds until the indicator light turns off.
Image: A detailed view of the TK-X2 unit, emphasizing the large, accessible buttons for intuitive control.
Bluetooth Pairing
To pair the TK-X2 with your mobile phone or other Bluetooth devices:
- Ensure the TK-X2 is powered off.
- Press and hold the Power button for approximately 5-7 seconds until the indicator light flashes red and blue alternately, indicating pairing mode.
- On your mobile phone, enable Bluetooth and search for "BETOWEY TK-X2".
- Select the device to connect. Once paired, the indicator light will flash blue slowly.
Intercom Communication
The TK-X2 supports communication with up to 3 intercoms, prioritizing 2-way communication. The maximum range is up to 1000 meters in open terrain.
- Initiate Intercom: Short press the Intercom button to start communication with a paired intercom unit.
- End Intercom: Short press the Intercom button again to end the intercom conversation.
- Switch Intercom Partner: If multiple units are paired, short press the Intercom button to cycle through connected partners.
Image: Depiction of two riders communicating via the TK-X2 intercom, highlighting its universal compatibility and effective range.
Music Playback
Once paired with your phone, you can stream music to the TK-X2 headset.
- Play/Pause: Short press the Multi-function button (often the phone button).
- Next Track: Long press the Volume Up button.
- Previous Track: Long press the Volume Down button.
- Volume Adjustment: Short press the Volume Up/Down buttons.
Image: A rider enjoying music, demonstrating the TK-X2's audio capabilities.
Phone Calls
- Answer Call: Short press the Multi-function button when a call comes in.
- End Call: Short press the Multi-function button during a call.
- Reject Call: Long press the Multi-function button when a call comes in.
- Redial Last Number: Double press the Multi-function button.
Voice Assistant (Siri/Google Assistant)
Activate your phone's voice assistant for hands-free control.
- Activate: Long press the Multi-function button until you hear a prompt.
Image: The TK-X2 unit on a helmet, illustrating its compatibility with voice assistants for hands-free calling and commands.
Disabling Auto Answer Function
You can disable the automatic call answering feature for more personalized control.
- Deactivate: Press the Power button and the Plus (+) button together for 1 second.
- Reactivate: Repeat the same operation.
Image: Visual guide on how to disable the automatic call answering feature on the TK-X2 for enhanced safety and control.
Battery Status and Charging
The TK-X2 is equipped with a 650mAh battery, providing approximately 24 hours of active use and 280 hours of standby time. It charges via a Type-C interface.
- Battery Prompt: Upon power-up, the device audibly informs you of the battery status (e.g., "Battery full", "Battery medium", "Battery low").
- Charging: Connect the provided USB Type-C cable to the charging port on the unit and a power source. A full charge takes approximately 3 hours.
Image: The TK-X2 unit showcasing its battery capacity and charging specifications.
Image: Visual representation of the TK-X2's battery life and power prompt indicators.
Maintenance
To ensure the longevity and optimal performance of your BETOWEY TK-X2 intercom, follow these maintenance guidelines:
- Cleaning: Use a soft, damp cloth to wipe the exterior of the unit. Avoid using harsh chemicals, solvents, or abrasive cleaners.
- Water Resistance: The TK-X2 is water-resistant (IP65 rated), meaning it can withstand splashes and light rain. However, it is not designed for submersion. Ensure the charging port cover is securely closed when not charging to maintain water resistance.
- Storage: When not in use for extended periods, store the unit in a cool, dry place away from direct sunlight and extreme temperatures. Charge the battery periodically (e.g., every 3-6 months) to prevent deep discharge.
- Speaker and Microphone Care: Keep the speaker and microphone clean and free from debris. Avoid bending the microphone boom excessively.
Image: Visual representation of the TK-X2's water resistance and advanced internal components.
Troubleshooting
If you encounter issues with your BETOWEY TK-X2, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Low battery; incorrect power-on procedure. | Charge the device fully. Ensure you press and hold the Power button for 3 seconds. |
| Cannot pair with phone/intercom. | Device not in pairing mode; Bluetooth off on phone; too far apart. | Ensure TK-X2 is in pairing mode (flashing red/blue). Check phone's Bluetooth settings. Bring devices closer. |
| No audio or low volume. | Volume too low; speakers not positioned correctly; loose connection. | Increase volume on both TK-X2 and connected device. Adjust speaker position inside helmet. Check speaker connections. |
| Intercom connection unstable. | Out of range; obstacles; interference. | Reduce distance between intercom units. Move to an open area. Avoid strong electromagnetic interference. |
| Microphone not picking up voice. | Microphone not connected; incorrect microphone type for helmet; poor positioning. | Ensure microphone is securely plugged in. Verify correct microphone type (soft/hard) for your helmet. Position microphone close to your mouth. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | BETOWEY TK-X2 |
| Connectivity Technology | Wireless (Bluetooth) |
| Bluetooth Version | 5.0 |
| Intercom Range | Up to 1000 meters (open terrain) |
| Intercom Support | 2-way communication (links up to 3 intercoms) |
| Battery Capacity | 650mAh |
| Battery Life (Active Use) | Approx. 24 hours |
| Standby Time | Approx. 280 hours |
| Charging Time | Approx. 3 hours |
| Charging Interface | Type-C |
| Water Resistance Level | IP65 (Water Resistant) |
| Noise Control | Active Noise Cancellation (DSP technology) |
| Frequency Range | 20 Hz - 20,000 Hz |
| Product Dimensions | 3.03 x 0.67 x 1.53 inches |
| Item Weight | 14.4 ounces |
Warranty and Support
For detailed warranty information and customer support, please refer to the official BETOWEY website or contact their customer service directly. The product typically includes a manufacturer's warranty covering defects in materials and workmanship.
Included components: User Manual, Mounting Accessories, Microphone & Speaker Set, Intercom Headset.
For further assistance, please visit the BETOWEY Store on Amazon.
