SISIGAD Electric Scooter HY-B17 User Manual

1. Introduction

This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your SISIGAD Electric Scooter Model HY-B17. Please read this manual thoroughly before first use to ensure optimal performance and safety.

2. Safety Information

Your safety is paramount. The HY-B17 electric scooter is UL-2272 certified, ensuring it meets high safety standards. Always wear appropriate safety gear, including a helmet, when operating the scooter.

2.1 Key Safety Features

• Dual Braking System: Equipped with EABS anti-lock braking and DISC braking for responsive stopping power, reacting in 0.1 seconds.
• Automatic Lighting: Features auto-on headlights and brake-activated taillights for visibility, especially in low-light conditions.
• Anti-Slip Handlebar: Designed for secure grip and control.

2.2 Important Warnings

• Do not use the product while charging.
• Do not charge or use the battery if water damage has occurred.
• If not used for a long time, it is recommended to still charge every three months.
• Do not step on the folding handle or the safety lock.

3. Package Contents

Upon opening the box, verify that all components are present and undamaged.

• SISIGAD Electric Scooter (main unit)
• Power Adapter/Charger
• Toolkit (screwdriver, screws)
• User Manual

Figure 1: SISIGAD Electric Scooter with its mobile application interface.

4. Setup and Assembly

The scooter comes largely pre-assembled. Only the handlebars require attachment.

4.1 Unfolding the Scooter

1. Carefully remove the scooter from its packaging. It is well-protected with foam inserts.
2. Lift the main stem of the scooter until it clicks into the upright position.
3. Secure the stem by engaging the safety lock mechanism.

4.2 Attaching the Handlebars

1. Gently feed the wiring from the handlebar assembly through the top of the main stem.
2. Align the handlebar with the stem, ensuring the brake lever is on the left side and the acceleration control is on the right.
3. Secure the handlebar to the stem using the provided screws and screwdriver. There are typically six screw points (two on each side, two in front).

5. Charging Instructions

Before first use, fully charge the scooter's battery.

1. Locate the charging port on the front part of the scooter's deck, near the base of the stem. It is covered by an orange protective cap.
2. Open the protective cap and firmly insert the charger plug.
3. Plug the power adapter into a standard wall outlet. The charger's indicator light will typically show red while charging and turn green when fully charged.
4. A full charge takes approximately 4 hours.

Figure 2: The scooter's 36V lithium battery provides a 15-mile range and charges in 4 hours.

6. Operating Instructions

6.1 Power On/Off and Speed Modes

1. To power on the scooter, press and hold the power button on the LCD display.
2. To cycle through the three speed modes (Low, Medium, High), quickly press the power button once while the scooter is on.
3. To power off, press and hold the power button.

6.2 LCD Display Functions

The bright LCD display shows real-time information:

• Current Speed
• Mileage
• Battery Level
• Active Speed Mode

Figure 3: Smart LCD Display provides essential riding information at a glance.

6.3 Smart App Control (Orbital Sports)

Connect your scooter via Bluetooth to the exclusive 'Orbital Sports' app (available for iOS/Android) to customize your ride.

• Set speed limits (Low/Med/High).
• Activate/deactivate cruise control.
• Turn automatic lights on/off.
• View real-time stats and track mileage.
• Lock/unlock the scooter for added security.

6.4 Riding the Scooter

The scooter features a powerful 500W peak motor, allowing speeds up to 19 mph and tackling 15% inclines.

• Acceleration: Use the thumb throttle on the right handlebar to accelerate.
• Braking: Use the brake lever on the left handlebar to engage the dual braking system.
• Tires: The 8.5" hybrid tires (air-filled front, honeycomb solid rear) provide comfort and puncture resistance across various terrains.

7. Folding and Portability

The HY-B17 is designed for easy portability, folding in three simple steps in under 7 seconds.

1. Locate the folding mechanism at the base of the handlebar stem.
2. Press the release lever and pull it back to unlock the stem.
3. Fold the handlebar stem down towards the rear wheel until it latches onto the rear fender.

The folded scooter weighs 31.7 lbs and can be easily carried or stored in car trunks, buses, or tight spaces.

Figure 4: The scooter's foldable design allows for easy transport and storage.

8. Maintenance

Regular maintenance ensures the longevity and safe operation of your scooter.

• Tires: Regularly check tire pressure for the air-filled front tire. Inspect both hybrid tires for wear or damage.
• Brakes: Periodically check the responsiveness of the dual braking system. Adjust if necessary.
• Battery: Charge the battery fully after each use. If storing for extended periods, charge every three months to maintain battery health.
• Cleaning: Wipe down the scooter with a damp cloth. Avoid using high-pressure water or harsh chemicals.

9. Troubleshooting

Here are solutions for common issues you might encounter:

• Scooter not turning on: Ensure the battery is charged. Check all connections.
• Battery not charging: Verify the charger is properly connected to both the scooter and the power outlet. Check the charger's indicator light.
• App connectivity issues: Ensure Bluetooth is enabled on your smartphone and the scooter is powered on. Try restarting both devices.
• Reduced speed/range: This can be affected by speed mode, rider weight, road conditions, temperature, and riding style.

10. Specifications

11. Warranty and Support

SISIGAD provides a 180-day warranty or parts replacement service. For any questions or support needs, please contact SISIGAD customer service.