VEVOR 28 Inch Adjustable Furniture Legs

1. Introduction

This instruction manual provides detailed guidance for the installation, operation, and maintenance of your VEVOR 28 Inch Adjustable Furniture Legs. Designed for DIY projects, these square reinforced steel legs offer robust support for various tabletops, including office desks, dining tables, and writing desks. Please read this manual thoroughly before beginning installation to ensure proper setup and safe use.

2. Safety Information

Important Safety Precautions:

• Ensure stability by following all installation instructions precisely.
• Be aware of the maximum weight limits for the legs and your chosen tabletop. The legs are designed to support up to 1000 pounds.
• Exercise caution to avoid potential pinch points or sharp edges during assembly and use.
• Always use appropriate personal protective equipment (e.g., gloves, eye protection) during installation.
• Keep small parts and tools out of reach of children.

3. Product Features

• Exceptional Load Capacity: Each 28-inch table leg is constructed from solid steel rods, providing significant strength to support up to 1000 pounds. The welded mounting plate further enhances durability and structural integrity.
• Wear-resistant and Rust-proof Finish: The legs feature a high-performance matte black powder coating, applied through an electrostatic process and high-temperature baking. This finish creates a protective layer that resists corrosion, rust, and general wear, ensuring long-lasting durability.
• Versatile Compatibility: These adjustable table legs are designed to adapt to various tabletop shapes and sizes, making them suitable for diverse living and working environments. They can be used for kitchen tables, living room consoles, studio desks, and more.
• Protective Packaging: The product is double-packaged using BC corrugated cardboard and EPE foam padding. This packaging method meets international safety standards, reducing the risk of damage during transit and ensuring product integrity upon arrival.

Image: The robust design of the VEVOR furniture legs allows them to support heavy loads, up to 1000 pounds, suitable for various applications.

Image: Detail of the wear-resistant and rust-proof matte black powder coating on the furniture leg.

4. Package Contents

The VEVOR 28 Inch Adjustable Furniture Legs package includes the following components:

• Table Legs x 2
• Adjustable Leg Cups M10 x 4
• Hexagonal Nuts M10 x 4
• Self-Tapping Screws ST3.5 x 30 mm x 18
• Open-End Wrench x 1
• Instruction Manual x 1 (this document)

Image: All components included in the VEVOR furniture legs package.

5. Setup and Installation

Installation of the VEVOR furniture legs is designed to be quick and straightforward. Follow these steps for a secure setup:

1. Prepare the Tabletop: Place your chosen tabletop upside down on a clean, stable, and protected surface.
2. Position the Legs: Place the furniture legs in their desired positions on the tabletop. Ensure they are aligned correctly and mark the pre-drilled holes on the tabletop using a pencil or marker.
3. Secure the Legs: Using a screwdriver (or power drill with appropriate bit), securely fasten the provided self-tapping screws one by one through the pre-drilled holes in the leg's mounting plate into the tabletop. Ensure all screws are tightened firmly to prevent wobbling.
4. Attach Adjustable Leg Cups: Screw the adjustable leg cups (M10) into the threaded inserts at the bottom of each leg. Use the provided hexagonal nuts (M10) to secure them if desired, or simply screw them in to allow for height adjustment.
5. Final Adjustment: Carefully flip the table upright. Adjust the height of each leg cup by rotating it until the table is level and stable on your desired surface.

Image: Visual guide for the quick installation process.

Image: Detailed dimensions of the furniture legs, useful for planning installation.

6. Operating Instructions (Height Adjustment)

The VEVOR furniture legs feature adjustable leg cups, allowing you to fine-tune the height and level the table on uneven surfaces. Each leg cup provides approximately 0.98 inches (25 mm) of adjustment range.

• To increase the leg height, rotate the adjustable leg cup counter-clockwise.
• To decrease the leg height, rotate the adjustable leg cup clockwise.
• Ensure all four legs are adjusted to achieve a stable and level surface for your tabletop.

Image: Detail of the adjustable leg cup for leveling and height modification.

7. Maintenance

To ensure the longevity and appearance of your VEVOR furniture legs, follow these simple maintenance guidelines:

• Cleaning: Wipe the legs with a dry cloth to remove dust and debris. For stubborn marks, a slightly damp cloth can be used, followed immediately by a dry cloth to prevent moisture buildup.
• Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the powder-coated finish.
• Regular Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if any looseness is detected to maintain stability.
• Protect from Moisture: While the legs are rust-resistant, prolonged exposure to excessive moisture should be avoided to preserve the finish.

8. Troubleshooting

If you encounter issues with your VEVOR furniture legs, consider the following troubleshooting steps:

• Table is Wobbly:
  • Check if all screws securing the legs to the tabletop are fully tightened.
  • Adjust the leg cups on each leg to ensure the table is level on the floor. Uneven flooring is a common cause of wobbling.
  • Ensure the tabletop itself is flat and not warped.
• Legs Appear Misaligned:
  • Verify that the legs were positioned correctly and marked accurately before drilling.
  • Ensure the tabletop edges are straight and square, as irregularities in the tabletop can make the legs appear misaligned.
  • While rare, manufacturing variations can occur. If misalignment significantly impacts functionality or aesthetics after careful installation, contact VEVOR customer support.
• Difficulty Adjusting Leg Height:
  • Ensure the leg cups are not cross-threaded. Unscrew them completely and re-thread carefully.
  • Check for any debris or obstruction in the threaded inserts.

9. Specifications

Detailed specifications for the VEVOR 28 Inch Adjustable Furniture Legs:

Image: Comprehensive product specifications and dimensional diagram.

10. Warranty and Support

For warranty information and customer support, please refer to the manufacturer's official website or the documentation provided with your purchase. VEVOR typically offers support for their products.

You can visit the VEVOR store for more information: VEVOR Official Store