1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your addlon Tree Floor Lamp Model YY-02. Please read this manual thoroughly before use to ensure proper function and safety.
2. Package Contents
Verify that all components are present before beginning assembly:
- Lamp Base
- Lamp Pole Sections (multiple)
- 3 x Lamp Heads with GU10 Bulb Sockets
- 3 x LED Bulbs
- Remote Control
- Power Cable with Foot Switch
- User Manual (this document)
Image: All components of the addlon Tree Floor Lamp, including the base, pole, three adjustable lamp heads, and the remote control unit.
3. Assembly Instructions
Assembly typically takes approximately 20 minutes. Follow these steps:
- Attach the Base: Securely screw the lowest pole section into the lamp base.
- Connect Pole Sections: Carefully thread the power cord through each pole section and screw the sections together clockwise until snug. Ensure no wires are pinched.
- Attach Lamp Heads: Screw the three lamp heads onto the designated points on the upper pole section.
- Install Bulbs: Insert the provided LED bulbs into each GU10 socket in the lamp heads.
- Connect Power: Plug the power cable into a standard electrical outlet.
Image: The assembled addlon Tree Floor Lamp with key dimensions, showing a total height of 63 inches.
4. Operating Instructions
4.1 Power On/Off
- Foot Switch: Press the foot switch located on the power cable to turn the lamp on or off.
- Remote Control: Press the power button (I/O) on the remote control.
4.2 Remote Control Functions
The remote control allows for convenient adjustment of brightness and color temperature from up to 20 meters away.
Image: The remote control for the addlon Tree Floor Lamp, illustrating its various buttons for light control.
Image: Detailed view of the remote control, highlighting buttons for stepless brightness adjustment (5% to 100%) and stepless color temperature adjustment (3000K Warm White to 6000K Daylight).
- Brightness Adjustment: Use the brightness up/down buttons on the remote to adjust the light intensity from 1% to 100%.
- Color Temperature Adjustment: Use the color temperature buttons to change the light color from 3000K (warm white) to 6000K (cool white).
- Pre-set Modes: The remote may include pre-set buttons for common brightness or color temperature settings. Refer to the remote's specific markings.
Image: Visual representation of the lamp's dimming function, showing light output from 10% to 100% intensity.
4.3 Adjustable Lamp Heads
Each lamp head can be adjusted independently to direct light where needed:
- Vertical Rotation: Each lamp head can rotate 180 degrees vertically.
- Horizontal Rotation: Each lamp head can rotate 360 degrees horizontally.
Image: Illustration detailing the adjustable angles of the lamp heads, allowing for 180-degree vertical and 360-degree horizontal movement.
5. Maintenance
To ensure the longevity and optimal performance of your addlon Tree Floor Lamp, follow these maintenance guidelines:
- Cleaning: Disconnect the lamp from power before cleaning. Use a soft, dry cloth to wipe down the lamp pole and heads. Avoid abrasive cleaners or solvents.
- Bulb Replacement: Ensure the lamp is unplugged and the bulbs have cooled before attempting to replace them. Use only GU10 LED bulbs of appropriate wattage (maximum 27 watts).
- Cord Care: Regularly inspect the power cord and plug for any damage. Do not use the lamp if the cord is frayed or damaged.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power, loose connection, faulty bulb. | Check power outlet, ensure all pole sections are tightened, replace bulb. |
| Remote control not working. | Dead batteries, remote out of range, obstruction. | Replace remote batteries, ensure remote is within 20 meters of the lamp, remove obstructions. |
| Light flickers or dims unexpectedly. | Loose bulb, unstable power supply. | Tighten bulbs, try a different power outlet. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | YY-02 |
| Brand | addlon |
| Product Dimensions | 10"D x 10"W x 64"H |
| Item Weight | 9.8 Pounds |
| Material | Metal |
| Finish Type | Painted |
| Bulb Base | GU10 |
| Light Source Type | LED |
| Wattage | 27 watts (total) |
| Voltage | 110 Volts (AC) |
| Control Method | Remote, Foot Switch |
| Special Features | Adjustable Color Temperature, Dimmable, Remote Control |
| Indoor/Outdoor Usage | Indoor |
8. Safety Information
- Always unplug the lamp before moving, cleaning, or replacing bulbs.
- Do not expose the lamp to water or excessive moisture. This product is for indoor use only.
- Ensure the lamp is placed on a stable, level surface to prevent tipping.
- Keep the power cord away from heat sources and sharp edges.
- Do not attempt to modify or disassemble the lamp beyond the instructions provided.
9. Warranty and Support
The addlon Tree Floor Lamp Model YY-02 comes with a 2-year product support warranty. This warranty covers manufacturing defects and ensures your peace of mind.
For any issues, concerns, or warranty claims, please contact addlon customer service. Refer to the contact information provided with your purchase or visit the official addlon website for support.
