Introduction
Thank you for choosing the addlon Tree Floor Lamp. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new lamp. Please read these instructions thoroughly before use and retain them for future reference.
The addlon Tree Floor Lamp is designed with three adjustable and rotating light fixtures, offering versatile illumination for various spaces. It includes three 9 Watt, 800 Lumen UL listed LED bulbs, providing a total of up to 2,400 lumens of soft 2700K warm white light. Each light head features a separate rotary switch for individual control, allowing you to customize your lighting needs.
Safety Instructions
- Ensure the lamp is unplugged before assembly, cleaning, or replacing bulbs.
- Do not use bulbs exceeding 20 Watts for LED or 60 Watts for incandescent per socket.
- Keep the lamp away from water and moisture.
- Do not operate the lamp with a damaged cord or plug.
- Place the lamp on a stable, level surface to prevent tipping.
- This product is for indoor use only.
Package Contents
- Lamp Pole Sections (various segments)
- Lamp Base
- 3 x Lamp Heads with E26 Sockets
- 3 x 9W LED Bulbs (2700K Warm White)
- Power Cord with Foot Switch
Setup and Assembly
Assembly of your addlon Tree Floor Lamp is designed to be straightforward. Follow these steps:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface.
- Assemble the Pole: Screw the lamp pole sections together clockwise until secure. Ensure all connections are tight.
- Attach to Base: Secure the assembled lamp pole to the lamp base by screwing it clockwise. The base is weighted for stability.
- Install Lamp Heads: Attach each lamp head to its designated position on the pole. Ensure they are securely fastened.
- Insert LED Bulbs: Carefully screw the provided LED bulbs into each E26 socket in the lamp heads. Do not overtighten.
- Connect to Power: Plug the power cord into a standard electrical outlet. The lamp is now ready for use.
Image: Visual guide for the 5-step assembly process, illustrating how to connect pole sections, attach to the base, and install lamp heads and bulbs.
Operating Instructions
Your addlon Tree Floor Lamp offers flexible lighting control:
- Power On/Off: Use the convenient foot switch located on the power cord to turn the entire lamp on or off.
- Individual Light Control: Each lamp head is equipped with a separate rotary switch. Turn the switch on top of each lampshade clockwise to turn that specific light on or off. This allows you to illuminate one, two, or all three lights as needed.
- Adjusting Light Direction: The three omnidirectional light fixtures can be adjusted 360° horizontally and 180° vertically. Gently pivot and rotate each lamp head to direct light precisely where it is desired.
Image: Detail of a lamp head highlighting the individual rotary switch for independent light control.
Image: Diagram demonstrating the flexible movement of the lamp heads, allowing for 180° vertical and 360° rotational adjustments.
Maintenance
- Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the lamp. Avoid abrasive cleaners or solvents that could damage the finish.
- Bulb Replacement: Ensure the lamp is unplugged and bulbs have cooled before attempting to replace them. Unscrew the old bulb and screw in a new E26 base bulb. Remember not to exceed 20 Watts for LED bulbs or 60 Watts for incandescent bulbs per socket.
- Inspection: Periodically check the power cord and plug for any signs of damage. If damage is found, discontinue use and contact customer support.
Troubleshooting
- Lamp Not Turning On:
- Check if the power cord is securely plugged into the outlet.
- Ensure the wall switch (if applicable) is in the 'ON' position.
- Verify that the foot switch on the power cord is pressed to the 'ON' position.
- Confirm that the individual rotary switches on each lamp head are turned 'ON'.
- Test the bulbs in another working fixture or replace them with new ones to check if they are faulty.
- Flickering Lights:
- Ensure bulbs are screwed in tightly.
- Replace bulbs if flickering persists, as they may be nearing the end of their lifespan.
Specifications
| Feature | Detail |
|---|---|
| Brand | addlon |
| Model Number | 037 |
| Product Dimensions | 10"D x 10"W x 61.5"H |
| Material | Metal |
| Finish Type | Painted |
| Color | Black |
| Number of Light Sources | 3 |
| Bulb Base | E26 |
| Included Components | 3 x 9W LED Bulbs (2700K Warm White) |
| Max Wattage (per socket) | 20W LED / 60W Incandescent |
| Light Output Maximum | 2400 Lumens (total) |
| Switch Type | Rotary (individual heads), Foot Switch (overall) |
| Power Source | Corded Electric |
| Item Weight | 11.18 pounds |
Image: Detailed dimensions of the lamp, including height (61.5 inches) and lamp head diameter (4.7 inches).
Warranty and Support
For any questions, concerns, or support needs regarding your addlon Tree Floor Lamp, please contact addlon customer service. While specific warranty details are not provided in this manual, addlon is committed to customer satisfaction. Please refer to your purchase documentation or the addlon official website for the most current warranty information.
Contact Information: Please visit the addlon Store on Amazon for support and additional product information.