1. Product Overview
The HalloMotor Bafang RM G062 48V 1000W rear hub motor is designed for electric bicycle conversion kits, particularly suitable for fat bikes and snow bikes. This powerful rear-drive motor features a rated power of 1000W, a reduction ratio of 1:5, and a maximum torque of 85 Nm, providing robust assistance for various terrains. It is compatible with disc brakes and supports cassette-type freewheel mechanisms, enhancing riding comfort and performance.

Figure 1: Bafang RM G062 48V 1000W Rear Hub Motor. This image shows the main motor unit with its electrical connector.
2. Safety Information
- Always wear appropriate safety gear, including a helmet, when operating an electric bicycle.
- Ensure all connections are secure and properly insulated before operating the motor.
- Do not attempt to modify the motor or its components. Unauthorized modifications can lead to malfunction and void the warranty.
- Keep hands and clothing clear of moving parts during operation.
- Avoid operating the motor in extreme weather conditions or submerged in water.
- Regularly inspect the motor and associated components for any signs of wear or damage.
- Consult a qualified bicycle mechanic if you are unsure about any installation or maintenance procedures.
3. Package Contents
Verify that all items listed below are present in your package. If any items are missing or damaged, please contact your supplier.
- 1x Bafang RM G062 48V 1000W Rear Hub Motor (175mm or 190mm dropout, with G9.12 or G11.6 male plug)
- 1x Motor Cable (800mm length)

Figure 2: Motor unit shown with the included 800mm motor cable connected.
4. Specifications
| Feature | Specification |
|---|---|
| Model | RM G062 1000.DC |
| Installation Position | Rear Wheel |
| Rated Voltage | 48 V |
| Rated Power | 1000 W |
| Installation Width (OLD/Dropout) | 175 mm / 190 mm (selectable) |
| Reduction Ratio | 1:5 |
| Brake Compatibility | Disc Brake |
| Freewheel Type | Cassette |
| Color | Black |
| Maximum Torque | 85 Nm |
| Operating Temperature | -20 to 40 ℃ |
| Noise Level | < 55 dB |
| Efficiency | > 80% |
| Motor Plug Type | A: G9.12 Male Plug or B: G11.6 Male Plug (optional) |

Figure 3: Rear view of the motor, highlighting the cassette freewheel mounting area.
5. Setup and Installation
This section outlines the general steps for installing the Bafang RM G062 rear hub motor. Professional installation is recommended.
- Prepare the Bicycle: Ensure your bicycle's rear dropout width matches the motor's specification (175mm or 190mm). Remove the existing rear wheel and any associated components like the cassette and disc brake rotor.
- Install Cassette and Disc Brake Rotor: Mount your bicycle's cassette onto the motor's freewheel body. Secure the disc brake rotor onto the motor's disc brake mount according to the brake manufacturer's instructions.
- Mount the Motor: Carefully insert the motor into the bicycle's rear dropouts. Ensure the motor's axle is fully seated and the anti-rotation washers (if included with your kit) are correctly positioned. Tighten the axle nuts securely to the manufacturer's recommended torque specifications.
- Connect Motor Cable: Connect the 800mm motor cable to the motor's male plug (G9.12 or G11.6, depending on your model). Route the cable along the bicycle frame, securing it with cable ties, to the location of your e-bike controller. Ensure the cable is not pinched or exposed to moving parts.
- Connect to Controller: Connect the motor cable to the corresponding port on your e-bike controller. Refer to your controller's manual for specific connection details.
- Final Checks: Before riding, perform a thorough check of all connections, brake functionality, and ensure the wheel spins freely without rubbing.

Figure 4: Close-up view of the motor axle, showing the dropout interface and wiring exit point.
6. Operation
The Bafang RM G062 motor operates as part of a complete electric bicycle system. Its operation is typically controlled by an e-bike display and controller unit (sold separately).
- Power On: Turn on your e-bike system via the main power button on your display or battery.
- Select Assist Level: Use the controls on your display to select the desired pedal assist level. Higher levels provide more motor assistance.
- Pedal or Use Throttle: The motor will engage when you begin pedaling (pedal assist) or when you activate the throttle (if your system includes one).
- Power Off: Always power off your e-bike system when not in use to conserve battery life and prevent accidental activation.
For detailed instructions on operating your specific e-bike system, refer to the user manual provided with your controller and display unit.
7. Maintenance
Proper maintenance ensures the longevity and optimal performance of your Bafang RM G062 motor.
- Regular Cleaning: Keep the motor housing clean from dirt, mud, and debris. Use a damp cloth; avoid high-pressure washing directly on the motor.
- Cable Inspection: Periodically check all motor cables and connectors for wear, cuts, or corrosion. Ensure connections are tight and secure.
- Axle Nut Torque: Verify that the axle nuts are tightened to the correct torque specifications to prevent the wheel from shifting.
- Disc Brake Alignment: Ensure your disc brake rotor and caliper are properly aligned and functioning correctly.
- Avoid Overheating: While the motor is designed for robust use, avoid prolonged operation at maximum power on steep inclines without adequate cooling, especially in hot weather.
- Storage: When storing the e-bike for extended periods, especially in cold conditions, it is advisable to store the battery indoors at a moderate temperature.
8. Troubleshooting
If you encounter issues with your motor, refer to the following common troubleshooting steps. For complex problems, consult a professional technician.
| Problem | Possible Cause | Solution |
|---|---|---|
| Motor not assisting | Battery low or off; loose cable connection; assist level set to zero; system error. | Check battery charge and power; ensure all cables are securely connected; increase assist level; check display for error codes and consult controller manual. |
| Unusual noise from motor | Loose components; internal damage; foreign object. | Inspect for loose parts; discontinue use and consult a professional if noise persists or is severe. |
| Motor cuts out intermittently | Loose connection; overheating; battery issue. | Check all electrical connections; allow motor to cool down; check battery health and connections. |
| Reduced power output | Low battery; incorrect assist level; motor or controller issue. | Charge battery fully; adjust assist level; consult a professional for diagnosis. |
9. Warranty and Support
The Bafang RM G062 motor comes with a Limited Warranty. Please refer to your purchase documentation or contact your seller for specific terms and conditions of the warranty.
For technical support, spare parts, or warranty claims, please contact HalloMotor customer service or the authorized dealer from whom you purchased the product. Provide your product model number (RM G062 1000.DC) and proof of purchase when seeking support.
Manufacturer: Hallomotor
Country of Origin: China