Introduction
Thank you for choosing the LUXOAK King Size Lift Up Storage Bed. This platform bed frame is designed to provide both comfort and practical storage solutions for your bedroom. It features a gas lift mechanism for easy access to under-bed storage, a headboard with integrated charging station, and a sturdy wood and metal construction. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure safe and optimal use of your new bed frame.
Safety Information
- Read all instructions carefully before assembly and use. Keep this manual for future reference.
- Ensure all parts are present and undamaged before beginning assembly. Do not use if any parts are missing or broken.
- Assemble the bed frame on a soft, clean surface to prevent scratches.
- Two people are recommended for assembly to ensure safety and ease.
- Do not overtighten screws during assembly.
- Ensure the gas lift mechanism is properly installed and functioning before placing a mattress on the frame.
- Always use both hands to lift and lower the bed frame when accessing storage. Keep hands and fingers clear of moving parts.
- Do not allow children to play on or around the gas lift mechanism.
- The charging station is designed for standard electronic devices. Do not overload the outlets or USB ports.
- Regularly check all connections and fasteners to ensure they remain tight.
Package Contents
Before assembly, verify that all components listed below are included in your package:
- Headboard components
- Bed frame side rails and footboard
- Gas lift mechanism components
- Wooden slats and slat holders
- Hardware pack (screws, bolts, Allen wrench, etc.)
- Instruction manual
If any parts are missing or damaged, please contact customer support for assistance.
Setup and Assembly
Assembly of the LUXOAK King Size Lift Up Storage Bed is designed to be straightforward. Please follow the steps below carefully. Two people are recommended for efficient and safe assembly.
Recommended Tools (Not Included):
- Phillips head screwdriver
- Rubber mallet (optional, for slat installation)
Assembly Steps:
- Unpack and Identify Parts: Lay out all components on a clean, soft surface. Refer to the parts list in your included manual to identify each piece.
- Assemble the Headboard: Attach the headboard panels to the metal frame using the provided hardware. Ensure the charging station component is correctly oriented and secured.
- Assemble the Bed Frame Base: Connect the side rails and footboard to form the main bed frame structure. Do not fully tighten all bolts until the frame is squared.
- Install Gas Lift Mechanism: Carefully attach the gas lift mechanism to the bed frame according to the detailed diagrams in your manual. Ensure the pistons are correctly oriented and securely fastened.
- Install Slats: Place the wooden slats into the designated holders on the bed frame. The snap-fit design allows for easy installation. Ensure all slats are firmly in place to support the mattress.
- Attach Anti-Falling Device: Secure the anti-falling device at the foot of the bed frame to prevent the mattress from sliding when the frame is lifted.
- Final Tightening: Once all components are assembled and aligned, go back and securely tighten all bolts and screws.
Image: Detailed dimensions of the King Size bed frame, including length, width, height, and headboard shelf depth. The bed measures 88 inches long, 78.5 inches wide, and 39.5 inches high, with a 12-inch clearance from the ground.
Image: Close-up view illustrating the gas lift design for easy access to storage and the anti-falling device designed to prevent the mattress from sliding off the frame.
Operating Instructions
Using the Lift-Up Storage:
The bed frame features a gas lift mechanism for convenient access to the ample storage space underneath. Ensure no items are obstructing the lifting path before operating.
- To Lift: Stand at the foot of the bed. Grasp the handle or edge of the bed frame (with mattress) firmly. Using both hands, gently lift the frame upwards. The gas pistons will assist in raising and holding the frame in an open position.
- To Lower: Stand at the foot of the bed. Grasp the handle or edge of the bed frame. Gently pull the frame downwards, applying slight pressure. The gas pistons will control the descent, allowing it to close smoothly. Ensure hands and fingers are clear of the closing mechanism.
Image: The King Size bed frame with the mattress lifted, showcasing the large under-bed storage area. The space is depicted holding various items like luggage and storage boxes, highlighting its capacity.
Using the Charging Station:
The integrated headboard features a charging station for your convenience.
- Power Connection: Plug the bed frame's power cord into a standard wall outlet.
- AC Outlets: Use the two 120V/12A AC outlets for devices such as lamps, laptops, or other small appliances.
- USB Ports: Use the two 5V/2A USB ports to charge smartphones, tablets, and other USB-powered devices.
Image: A detailed view of the multifunctional storage headboard, highlighting the built-in charging station. It shows two standard AC outlets and two USB ports, along with a 6.5-foot power cord for connectivity.
Maintenance
Proper care and maintenance will extend the life of your LUXOAK bed frame.
- Cleaning: Wipe down the wood and metal surfaces with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
- Hardware Check: Periodically check all bolts, screws, and connections to ensure they are tight. Retighten as necessary to maintain stability and prevent squeaking.
- Gas Lift Mechanism: Inspect the gas lift pistons for any signs of wear or damage. If the mechanism becomes difficult to operate or fails to hold the bed up, contact customer support for replacement parts.
- Charging Station: Keep the charging station free of dust and debris. Do not spill liquids on the outlets or USB ports.
Troubleshooting
If you encounter any issues with your bed frame, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame is wobbly or squeaks. | Loose hardware. | Check and tighten all bolts and screws. |
| Gas lift mechanism is difficult to lift or won't stay up. | Incorrect installation; damaged pistons; mattress too heavy/light. | Review assembly instructions for correct installation. Ensure mattress weight is within recommended range. Contact support if pistons are faulty. |
| Mattress slides off the frame when lifted. | Anti-falling device not installed or loose. | Ensure the anti-falling device is securely attached at the foot of the bed. |
| Charging station not working. | Power cord not plugged in; circuit breaker tripped; faulty device. | Ensure the power cord is securely plugged into a working wall outlet. Check your home's circuit breaker. Test with a different device. |
If the problem persists after attempting these solutions, please contact LUXOAK customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | BMB007 |
| Size | King |
| Product Dimensions (L x W x H) | 88" x 78.5" x 39.5" |
| Color | Rustic Brown |
| Material | Wood, Metal |
| Finish Type | Stained |
| Special Features | Ample Storage Space, Easy to Assemble, Squeak Resistant, Sturdy Construction, Gas Lift Mechanism, Storage Headboard, Built-in Charging Station (2 AC Outlets, 2 USB Ports) |
| Compatible Mattress Size | King (Recommended height: 10-14 inches) |
| Box Spring Required | No |
| Ground to Item Distance | 12 Inches |
| Item Weight | 129 pounds |
| Assembly Required | Yes |
| UPC | 615272316218 |
| Manufacturer | LUXOAX |
| Date First Available | September 13, 2023 |
Image: A diagram showing the recommended mattress height for the lift-up bed frame, indicating a range of 10-14 inches for optimal functionality and appearance.
Customer Support
For any questions, missing parts, or assistance with assembly or operation, please contact LUXOAK customer support. Refer to your purchase documentation for specific contact details or visit the official LUXOAK website.