ROIDMI EVA Robot Vacuum and Mop Combo User Manual

1. Product Overview

The ROIDMI EVA Robot Vacuum and Mop Combo is an advanced cleaning solution designed to automate floor maintenance. It features auto-mopping, a self-emptying station, and smart navigation capabilities, making it ideal for homes with pets and various floor types including carpet and hard floors.

Key features include:

• Automatic Cleaning: Equipped with separate clean and dirty water tanks, and an automatic dust bag cleaning system for hands-free operation.
• Pressure Mopping: High-efficiency mopping system with 12N pressurized bionic mops for effective cleaning on various floor surfaces.
• LDS Laser Navigation: Utilizes advanced laser radar technology for precise home mapping and efficient cleaning route planning.
• Customizable Maps: Manage multi-floor maps, set no-go zones, and define cleaning areas via the accompanying mobile application or voice control.
• Self-Emptying & Self-Cleaning Base: The base station automatically empties the robot's dustbin and cleans its mops, holding up to 60 days of dirt.
• Auto-Drying: Fast turbine auto-dries the mops to prevent mildew and odor.
• Powerful Suction: 3200Pa suction power effectively clears dirt and dust.
• Obstacle Avoidance: Capable of overcoming obstacles and preventing falls from stairs.

Figure 1.1: The ROIDMI EVA Robot Vacuum and Mop Combo with its self-emptying and self-cleaning base station.

2. Setup Guide

Follow these steps to set up your ROIDMI EVA for the first time.

2.1 Unboxing and Initial Placement

1. Carefully remove all components from the packaging.
2. Place the self-emptying and self-cleaning base station on a hard, flat surface against a wall, ensuring there is adequate space around it (at least 0.5 meters on both sides and 1.5 meters in front).
3. Connect the power cord to the base station and plug it into a wall outlet.

Figure 2.1: Diagram illustrating the self-empty, automatic separation, self-cleaning, and auto-drying functions of the base station.

2.2 Water Tanks and Dust Bag Installation

1. Open the top cover of the base station.
2. Install the clean water tank and dirty water tank into their respective slots. Fill the clean water tank with clean tap water.
3. Ensure the dust bag is correctly installed in its compartment within the base station.

Figure 2.2: Detailed view of the fully automated empty wash base station, showing the self-empty, automatic separation, self-cleaning, and auto-drying processes.

2.3 Robot Placement and Charging

• Place the ROIDMI EVA robot vacuum onto the charging contacts of the base station. Ensure it is properly docked.
• Allow the robot to fully charge before its first use. The indicator lights on the robot and base station will show charging status.

2.4 App Connectivity

• Download the official ROIDMI app from your smartphone's app store (iOS or Android).
• Open the app and follow the on-screen instructions to add your ROIDMI EVA device. This typically involves creating an account, selecting your device model, and connecting it to your home Wi-Fi network (supports 2.4GHz Wi-Fi).
• Once connected, you can access advanced features, customize settings, and control the robot remotely.

3. Operating Instructions

Learn how to effectively use your ROIDMI EVA for optimal cleaning performance.

3.1 Starting a Cleaning Cycle

• Manual Start: Press the power button on the robot or the base station to start a cleaning cycle.
• App Control: Use the ROIDMI app to initiate cleaning, select specific rooms, or set cleaning schedules.
• Voice Control: The ROIDMI EVA is compatible with Amazon Alexa and Google Assistant. Use voice commands like "Alexa, start the robot" or "Hey Google, start cleaning" to begin.

Figure 3.1: The ROIDMI EVA can be controlled via smart assistants like Alexa, allowing for convenient voice commands to start or stop cleaning.

3.2 Cleaning Modes

The robot supports various cleaning modes to suit your needs:

• Vacuuming: For dry debris and dust. The 3200Pa suction power ensures thorough cleaning.
• Mopping: For wet spills and stains. The 12N pressurized bionic mops provide deep cleaning.
• Vacuuming & Mopping (Integrated): Simultaneous vacuuming and mopping for comprehensive floor care.

Figure 3.2: The 12N pressurized bionic mops apply consistent pressure for effective stain removal during mopping.

3.3 Smart Navigation and Mapping

The ROIDMI EVA uses LDS Laser Navigation for precise mapping and efficient cleaning paths. It can detect and measure your home's layout to avoid redundant cleaning.

• Real-time Mapping: The robot creates and updates maps of your home as it cleans.
• Obstacle Avoidance: Built-in sensors help the robot navigate around furniture and other obstacles. It can also climb thresholds without fear and prevent falls from stairs using suspended induction.
• Customizable Maps: Through the app, you can:
  • Set "No-Go Zones" to restrict access to certain areas.
  • Define "Area Partition Cleaning" for spot cleaning specific areas.
  • Perform "Room Merging/Partition" to adjust room boundaries.
  • Assign "Room Naming" for easier control.
  • Set cleaning sequences for different rooms.

Figure 3.3: The ROIDMI app allows for detailed customization of cleaning maps, including setting no-go zones and defining cleaning sequences.

4. Maintenance

Regular maintenance ensures your ROIDMI EVA operates efficiently and extends its lifespan.

4.1 Base Station Maintenance

• Water Tanks: Regularly empty the dirty water tank and refill the clean water tank. Clean both tanks with fresh water to prevent residue buildup.
• Dust Bag: The base station's dust bag can hold up to 60 days of dirt. Replace the dust bag when the app indicates it is full or when you notice a decrease in suction performance.
• Mop Cleaning Tray: Periodically clean the mop cleaning tray inside the base station to remove any accumulated dirt or debris.

Figure 4.1: The self-cleaning mechanism of the base station washes the robot's mops automatically.

4.2 Robot Maintenance

• Mop Pads: Remove and wash the mop pads regularly. Replace them every 3-6 months depending on usage.
• Main Brush: Remove the main brush and clean any tangled hair or debris. Use the cleaning tool provided to cut and remove hair.
• Side Brush: Check the side brush for wear and tear. Clean any tangled hair. Replace if bristles are damaged.
• Sensors: Wipe all sensors (cliff sensors, wall sensors, charging contacts) with a clean, dry cloth to ensure proper operation.
• Filter: Clean the filter regularly by tapping out dust. Replace the filter every 1-3 months.

Figure 4.2: The auto-drying function uses a fast turbine to dry the mops, preventing mildew and unpleasant odors.

5. Troubleshooting

If you encounter issues with your ROIDMI EVA, refer to the following common problems and solutions.

For more complex issues, please refer to the full user manual or contact customer support.

6. Specifications

7. Warranty and Support

7.1 Warranty Information

The ROIDMI EVA Robot Vacuum Cleaner's battery is backed by a 24-month warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ROIDMI website.

7.2 Customer Support

If you have any questions, require technical assistance, or need to make a warranty claim, please contact ROIDMI customer support through one of the following methods:

• Official Website: Visit the ROIDMI official website for FAQs, support articles, and contact forms.
• Email Support: Refer to your product packaging or the official website for the customer support email address.
• In-App Support: Many common issues can be resolved through the support section within the ROIDMI mobile application.

When contacting support, please have your product model (XCQ15RM) and purchase information ready to expedite the process.