Introduction
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your XINLEI MA1343 Swivel TV Wall Bracket. Please read this manual thoroughly before installation and retain it for future reference. This bracket is designed to securely mount 13-42 inch LED, LCD, and Plasma TVs weighing up to 20kg (44lbs) with VESA patterns from 75x75mm to 200x200mm.
Safety Information
- Weight Capacity: Do not exceed the maximum weight capacity of 20kg (44lbs).
- Screen Size: Ensure your TV screen size is within the supported range of 13-42 inches.
- VESA Compatibility: Verify your TV's VESA mounting pattern is compatible (75x75mm to 200x200mm).
- Wall Type: This bracket is designed for installation on single wood studs or solid concrete/brick walls. DO NOT install into drywall alone.
- Professional Installation: If you are unsure about the installation process or wall type, consult a qualified professional.
- Hardware: Use only the provided mounting hardware. Ensure all screws are tightened securely.
- Children: Keep children away from the installation area.
Figure 1: Compatible Wall Types and Drywall Warning
Package Contents
Before beginning installation, please check that all components are present and undamaged. The package typically includes:
- TV Wall Bracket Assembly
- Wall Plate
- TV Mounting Plate
- Various Screws (for TV and wall mounting)
- Wall Anchors (for concrete/brick walls)
- Washers and Spacers
- Instruction Manual
Specifications
| Mounting Type | Wall Mount |
| Movement Type | Swivel, Tilt, Extension, Rotation Adjustable |
| Material | Alloy Steel |
| Compatible Devices | Monitor, Television |
| Screen Size Range | 13 - 42 Inches |
| Weight Capacity | 20 kg (44 lbs) |
| VESA Compatibility | 75x75mm, 100x100mm, 100x200mm, 200x100mm, 200x200mm |
| Tilt Adjustment | +/-10 Degrees |
| Swivel Adjustment | +/-90 Degrees |
| Extension Range | 2.36 - 16 Inches |
| Rotation | 360 Degrees |
Figure 2: VESA Mounting Patterns
Figure 3: Product Specifications and Movement Ranges
Setup and Installation
Follow these general steps for installation. Refer to the detailed instruction sheet included in your package for specific diagrams and hardware identification.
- Prepare the Wall Plate: Secure the wall plate to your chosen wall location. Ensure it is mounted on a single wood stud or a solid concrete/brick wall using the appropriate hardware. Use a level to ensure it is perfectly horizontal.
- Attach TV Mounting Plate to TV: Secure the TV mounting plate to the back of your television using the correct VESA screws, washers, and spacers.
- Hang the TV: Carefully lift the TV and hook the TV mounting plate onto the wall bracket assembly. Ensure it is securely seated.
- Adjust and Secure: Make any initial tilt or swivel adjustments and tighten all locking mechanisms to secure the TV in place.
Figure 4: Easy Installation Steps
Operating Instructions
The XINLEI MA1343 bracket offers flexible viewing options:
- Tilt: Adjust the TV screen up or down by +/-10 degrees to reduce glare and optimize viewing angles. Loosen the tilt adjustment screws, set the desired angle, and re-tighten.
- Swivel: Pivot the TV left or right by +/-90 degrees to view from different seating positions.
- Extension: Pull the TV out from the wall up to 16 inches or retract it back to a minimum of 2.36 inches for a low-profile look.
- Rotation: Rotate the TV 360 degrees for portrait or landscape viewing, useful for specific applications or dynamic content.
Figure 5: Flexible Viewing Angle Adjustments
Figure 6: Extension and Tilt Adjustments
Maintenance
Regular maintenance ensures the longevity and safe operation of your TV wall bracket:
- Check Connections: Periodically inspect all screws and bolts to ensure they remain tight. Re-tighten if necessary.
- Clean: Wipe the bracket with a soft, dry cloth to remove dust. Avoid abrasive cleaners or solvents.
- Movement: If the articulating arm feels stiff, apply a small amount of silicone-based lubricant to the pivot points.
Troubleshooting
- Issue: TV is not level after installation.
- Solution: Check the wall plate installation with a level. Some brackets allow for minor post-installation leveling adjustments. Refer to your detailed instruction sheet for specific leveling features.
- Issue: Bracket arm feels stiff or difficult to move.
- Solution: This can sometimes occur with new brackets. Apply a small amount of silicone lubricant to the moving joints. Repeated movement can also help loosen the mechanism over time.
- Issue: TV feels unstable or wobbly.
- Solution: Immediately remove the TV. Re-check all wall mounting screws and TV attachment screws for tightness. Ensure the wall type is appropriate and the anchors are correctly installed. If mounting to a wood stud, confirm the stud is solid and not damaged. If the issue persists, consult a professional.
Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official XINLEI website. Keep your purchase receipt as proof of purchase.
