Introduction
Thank you for choosing the Satisfyer Pro 2 Classic Blossom. This manual provides essential information for the safe and effective use, maintenance, and care of your device. Please read these instructions thoroughly before first use and retain them for future reference.
Safety Information
Your safety is paramount. Please observe the following guidelines:
- Medical Conditions: Consult a physician before use if you have any medical conditions, are pregnant, or have a pacemaker.
- Material Safety: The device is made of body-safe silicone. Discontinue use immediately if irritation occurs.
- Charging: Use only the original charging cable provided. Do not use the device while charging.
- Water Resistance: The device is IPX7 waterproof, meaning it can be submerged in water up to 1 meter for 30 minutes. Ensure the charging contacts are dry before charging.
- Storage: Store in a cool, dry place, away from direct sunlight and out of reach of children.
- Disposal: Dispose of the device and battery according to local environmental regulations.
Product Overview
The Satisfyer Pro 2 Classic Blossom is an air pulse vibrator designed for clitoral stimulation. It features Liquid Air Technology and 11 pressure wave programs.
Image Description: An illustration of the Satisfyer Pro 2 Classic Blossom, a pink rose-shaped device. Labels point to its key features: Liquid Air technology, romantic rose design, 11 pressure wave programs, soft body-safe silicone, magnetic charging connector, and contact-free clitoral stimulation.
Key Features:
- Liquid Air Technology: Features an ultra-thin silicone membrane designed to mimic the sensation of pulsed water.
- Pressure Wave Stimulation: Provides contact-free clitoral stimulation with 11 distinct programs.
- Material: Made from body-safe, silky-smooth medical-grade silicone.
- Waterproof: IPX7 rated for use in water.
- Rechargeable: Equipped with a built-in Lithium-ion battery.
- Compact Design: Travel-friendly and easy to handle.
Image Description: A visual highlighting the "Pro 2 Classic Blossom" model, emphasizing "Liquid Air Technology" and the inclusion of a "New Cap" and "Full Silicone" construction. The main device is shown alongside an inset of the new cap.
Setup
1. Initial Charging
Before first use, fully charge your Satisfyer Pro 2 Classic Blossom. Locate the two magnetic charging contacts on the bottom of the device.
Image Description: A view of the bottom of the Satisfyer Pro 2 Classic Blossom, clearly showing the two small, circular magnetic charging contacts.
- Connect the magnetic charging cable to the contacts.
- Plug the USB end of the cable into a suitable USB power adapter (not included) or a computer USB port.
- The device will indicate charging (e.g., a light indicator). A full charge typically takes 2-3 hours.
- Once fully charged, disconnect the cable.
2. Applying Lubricant
For optimal comfort and experience, apply a water-based lubricant to the device's head and the area of application.
Operating Instructions
The Satisfyer Pro 2 Classic Blossom features intuitive controls located on the device body.
Image Description: An angled view of the Satisfyer Pro 2 Classic Blossom, highlighting the control panel with the power button and intensity adjustment buttons.
1. Power On/Off
- To turn on, press and hold the power button (usually marked with a circle and vertical line) for approximately 2 seconds. The device will start on its lowest setting.
- To turn off, press and hold the power button again for approximately 2 seconds.
2. Adjusting Intensity
- Once powered on, short press the '+' button to increase the intensity of the pressure waves.
- Short press the '-' button to decrease the intensity.
- The device offers 11 distinct pressure wave programs. Continue pressing '+' to cycle through them.
3. Usage
Gently place the head of the device over the clitoris without direct contact. Experiment with different intensities and positions to find what is most pleasurable for you.
Maintenance and Cleaning
Proper cleaning and maintenance will extend the lifespan of your device.
1. Cleaning After Use
- Always clean the device immediately after each use.
- Wash the device with warm water and a mild, toy-specific cleaner or antibacterial soap.
- Rinse thoroughly to remove all soap residue.
- Pat dry with a lint-free cloth or allow to air dry completely before storing.
2. Storage
- Store your Satisfyer in a clean, dry, and dust-free environment.
- Keep it separate from other toys made of different materials to prevent material degradation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Battery is depleted. | Charge the device fully. |
| Device does not charge. | Charging cable not properly connected or damaged. Charging contacts are wet. | Ensure the magnetic cable is securely attached and contacts are dry. Try a different USB power source. |
| Weak or no pressure waves. | Low battery. Device head is blocked. | Recharge the device. Ensure the silicone head is clean and unobstructed. |
| Device turns off unexpectedly. | Low battery. | Recharge the device. |
If you experience issues not listed here, or if the problem persists, please contact Satisfyer customer support.
Specifications
- Model: Satisfyer Pro 2 Classic Blossom
- Model Number: 360581
- Brand: Satisfyer
- Technology: Liquid Air Technology, Air Pulse
- Programs: 11 pressure wave programs
- Material: Body-safe Silicone
- Water Resistance: IPX7 (Waterproof)
- Battery: 1 Lithium-ion (included), Rechargeable
- Dimensions (L x W x H): Approximately 15 x 10 x 10 cm
- Net Product Weight: Approximately 316 grams
- Country of Origin: China
Warranty and Support
Satisfyer products are manufactured to high-quality standards. For warranty information and customer support, please refer to the official Satisfyer website or contact your retailer. Keep your proof of purchase for warranty claims.
For further assistance, visit: www.satisfyer.com
