Introduction
Thank you for choosing the Modway Crossroads Round Wood Coffee Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.
Safety Information
- Read all instructions: Ensure you understand all assembly steps and safety warnings before proceeding.
- Keep children and pets away: Small parts can be a choking hazard. Keep them out of reach during assembly.
- Assemble on a soft, clean surface: This prevents scratching the furniture or your floor.
- Do not overtighten screws: Overtightening can damage the wood.
- Do not stand or sit on the table: This coffee table is designed for decorative items and light use, not as a seat or step stool. Maximum weight recommendation is 300 pounds.
- Check for stability: After assembly, ensure the table is stable and all connections are secure.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Package Contents
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Tabletop (1)
- Legs/Base components (various)
- Hardware pack (screws, washers, etc.)
- Assembly Guide (1)
Note: The hardware pack may contain small items. Handle with care.
Setup and Assembly Instructions
Assembly is required for this coffee table. It is recommended that two people assemble this product. A screwdriver is the recommended tool for assembly.
- Unpack all components and lay them out on a clean, soft surface to prevent scratches.
- Identify the tabletop and the base components.
- Attach the intersecting leg components to form the base structure. Ensure all connections are snug but do not overtighten.
- Carefully align the assembled base with the pre-drilled holes on the underside of the tabletop.
- Secure the base to the tabletop using the provided screws and a screwdriver. Tighten screws evenly until secure.
- Once assembled, gently turn the table upright. Check for stability and ensure all legs are level.
Assembly Video
Video 1: An overview of the Modway Crossroads coffee table, demonstrating its design and features. This video can assist with visual understanding of the table's structure during assembly.
Operating Instructions (Usage)
The Modway Crossroads Round Wood Coffee Table is designed for indoor use as a surface for beverages, books, and decorative items in living room or lounge areas.
- Place the table on a flat, stable surface to prevent wobbling.
- Avoid placing excessively hot or cold items directly on the tabletop. Use coasters or protective mats.
- Distribute weight evenly across the tabletop.
- Do not drag the table across the floor; lift it when moving to prevent damage to legs and flooring.
Maintenance and Care
Proper care will help maintain the appearance and longevity of your coffee table. This product is not stain resistant.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals, abrasive cleaners, or excessive moisture. Dry immediately with a clean cloth.
- Spills: Clean spills immediately to prevent staining, especially on the wood veneer surface.
- Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration of the wood finish.
- Humidity: Maintain a stable humidity level in the room to prevent wood from warping or cracking.
- Regular Checks: Periodically check and tighten all screws and connections to ensure stability.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly | Uneven floor or loose connections | Ensure table is on a level surface. Check and tighten all screws. |
| Scratches on surface | Sharp objects or abrasive cleaning | Use coasters and protective mats. Avoid dragging items. For minor scratches, wood repair kits may be used. |
| Discoloration or fading | Prolonged exposure to direct sunlight | Relocate the table away from direct sunlight or use window coverings. |
Specifications
- Brand: Modway
- Model Name: Crossroads
- Model Number: EEI-6557-WAL
- Product Dimensions: 32"D x 32"W x 18.5"H
- Item Weight: 20 Pounds
- Maximum Weight Recommendation: 300 Pounds
- Frame Material: Engineered Wood
- Top Material Type: Wood
- Finish Types: Veneer (Ash wood veneer)
- Color: Walnut
- Shape: Round
- Required Assembly: Yes
- Recommended Number of People for Assembly: 2
- Tools Recommended For Assembly: Screw Driver
- Indoor Outdoor Usage: Indoor
Warranty and Support
For warranty information, please refer to the product description on the store page where you purchased this item or contact Modway customer service directly. The manufacturer warranty description states to refer to the product description or store page.
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Modway customer support through their official website or the retailer from whom you purchased the product.
