Portronics Toad 31

Portronics Toad 31 Wireless Mouse User Manual

Introduction

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Portronics Toad 31 Wireless Mouse. Please read this manual thoroughly to ensure optimal performance and longevity of your device.

Portronics Toad 31 Wireless Mouse in blue and green

Image Description: A blue and green Portronics Toad 31 wireless mouse is shown from a slightly elevated angle, highlighting its ergonomic shape and color scheme.

Setup Guide

1. Battery Installation

The Portronics Toad 31 Wireless Mouse requires two AAA batteries (not included) for operation. Follow these steps to install the batteries:

  1. Locate the battery compartment on the underside of the mouse.
  2. Gently slide open the battery compartment cover.
  3. Insert two AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  4. Close the battery compartment cover until it clicks securely into place.
Underside of Portronics Toad 31 mouse showing battery compartment and USB receiver storage

Image Description: The underside of the Portronics Toad 31 wireless mouse is shown. It features a blue and green color scheme. The battery compartment is open, revealing slots for two AAA batteries. A small slot for the USB receiver is also visible. A power switch is located near the top of the underside.

2. Connecting the USB Receiver

The mouse connects wirelessly via a 2.4 GHz USB receiver. To establish a connection:

  1. Locate the USB receiver, typically stored within the battery compartment of the mouse.
  2. Remove the USB receiver from its storage slot.
  3. Plug the USB receiver into an available USB port on your computer (laptop or PC).
  4. The computer should automatically detect and install the necessary drivers. This process may take a few moments.
Portronics Toad 31 mouse with USB receiver plugged into a laptop

Image Description: A blue and green Portronics Toad 31 wireless mouse is positioned next to a laptop. The small USB receiver is shown plugged into a USB port on the laptop, illustrating the wireless connection setup.

3. Powering On the Mouse

After installing batteries and connecting the USB receiver:

  1. Locate the power switch on the underside of the mouse.
  2. Slide the switch to the "ON" position.
  3. The mouse should now be ready for use. If it does not respond, ensure the batteries are correctly inserted and the USB receiver is properly connected.

Operating Instructions

Wireless Connectivity

The Portronics Toad 31 operates on a 2.4 GHz wireless frequency, providing a stable connection up to 10 meters (approximately 33 feet) from the USB receiver. This allows for flexible positioning and comfortable use.

Silent Click Feature

The mouse is designed with silent click buttons to minimize noise during use. This feature contributes to a quieter working environment, ideal for shared spaces or late-night use.

Hand using Portronics Toad 31 mouse next to a sleeping child, illustrating silent clicks

Image Description: A hand is shown gently clicking the Portronics Toad 31 mouse, which is blue and green. In the background, a child is sleeping peacefully, emphasizing the silent click feature of the mouse.

Adjustable DPI (Dots Per Inch)

The Portronics Toad 31 features an adjustable DPI setting, allowing you to customize cursor sensitivity. You can switch between different DPI levels, up to 1600 DPI, to match your preference or task requirements. To adjust the DPI:

  1. Locate the DPI button, usually positioned near the scroll wheel on the top of the mouse.
  2. Press the DPI button to cycle through available sensitivity settings (e.g., 800, 1000, 1200, 1600 DPI).
  3. Observe the cursor movement on your screen to select the desired sensitivity.
Diagram showing adjustable DPI settings for Portronics Toad 31 mouse

Image Description: A diagram illustrates the adjustable DPI feature of the Portronics Toad 31 mouse. The mouse is shown from a top-down perspective, with lines radiating outwards indicating different DPI levels: 800, 1000, 1200, and 1600 DPI, highlighting the button used to switch between them.

Ergonomic Design

The mouse is designed with an ergonomic shape to provide a comfortable grip, reducing strain during extended periods of use. Its contours are intended to fit naturally in the hand.

Side view of Portronics Toad 31 mouse highlighting ergonomic design

Image Description: A side view of the blue and green Portronics Toad 31 wireless mouse is displayed. Curved lines above the mouse suggest its ergonomic design, indicating a comfortable fit for the hand.

Power Saving Features

The Portronics Toad 31 incorporates intelligent automatic energy-saving technology to extend battery life. If the mouse is inactive for a period, it will enter a low-power sleep mode. To reactivate, simply move the mouse or click any button.

Maintenance

Troubleshooting

ProblemPossible CauseSolution
Mouse not respondingLow or dead batteries, USB receiver disconnected, mouse powered off.Replace batteries, ensure USB receiver is securely plugged in, turn on the mouse.
Erratic cursor movementLow batteries, dirty optical sensor, interference.Replace batteries, clean the optical sensor with a soft cloth, move closer to the receiver or away from other wireless devices.
DPI button not changing sensitivitySoftware conflict, button malfunction.Restart your computer. If the issue persists, contact customer support.
Short wireless rangeObstructions, interference from other devices.Ensure a clear line of sight between the mouse and receiver. Move the receiver to a front USB port if possible. Reduce interference from other 2.4 GHz devices.

Specifications

FeatureDetail
BrandPortronics
Model NameToad 31
Item Model NumberPOR-2010
Connectivity Technology2.4 GHz Wireless (USB Receiver)
Movement Detection TechnologyOptical
Adjustable DPIUp to 1600 DPI
Working DistanceUp to 10 meters
Silent ClicksYes
Power Source2 x AAA Batteries (not included)
Auto Power SavingYes
CompatibilityWindows, Mac, Linux, Windows 7, Windows XP
Hardware PlatformLaptop, Personal Computer
Item Dimensions (LxWxH)10.7 x 6.9 x 4 Centimeters
Item Weight59 g
Hand OrientationRight Hand

Warranty and Support

Warranty Information

The Portronics Toad 31 Wireless Mouse comes with a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.

Customer Support

For technical assistance, troubleshooting, or warranty inquiries, please contact Portronics customer support:

  • Phone: 9555-245-245 (as per manufacturer information)
  • Manufacturer/Importer Address: Portronics Digital Pvt Ltd, Unit No. 1082-1090, 10th Floor, Block-B, Vegas, Dwarka, Sec-14, New Delhi-110075

Related Documents - Toad 31

Preview Portronics Toad 7 4-in-1 Wireless Optical Mouse User Manual | Bluetooth & 2.4GHz Connectivity
Detailed user manual for the Portronics Toad 7 wireless optical mouse. Learn about its 4-in-1 functionality, dual connectivity modes (Bluetooth and 2.4GHz USB receiver), ergonomic design, DPI settings, charging, and specifications. Get support information and compliance details.
Preview Portronics Toad Ergo 3 Wireless Mouse User Manual
User manual for the Portronics Toad Ergo 3, a rechargeable ergonomic wireless mouse with RGB lighting, dual connectivity (2.4GHz and Bluetooth), and adjustable DPI.
Preview Portronics Toad III Plus Rechargeable Wireless Mouse User Manual
User manual for the Portronics Toad III Plus rechargeable wireless mouse, detailing package contents, physical specifications, charging instructions, setup for 2.4 GHz and Bluetooth modes, connectivity switching, sensitivity adjustment, and button functions. Includes compliance and support information.
Preview Portronics Toad One 4-In-1 Wireless Optical Mouse User Manual | Setup, Features, Specs
Official user manual for the Portronics Toad One 4-In-1 Wireless Optical Mouse. Learn about setup, Bluetooth and USB connectivity, charging, controls, maintenance, and technical specifications.
Preview Portronics My Buddy K3 Portable Laptop Stand - User Manual and Guide
Comprehensive user manual for the Portronics My Buddy K3 portable laptop stand. Learn how to adjust angle, height, and friction for optimal ergonomics. Includes package contents, usage guidelines, and support information.
Preview Portronics Auto Tune Smart Audio Connector for Cars - User Manual
User manual for the Portronics Auto Tune, a smart audio connector for cars that enables wireless Bluetooth music streaming and hands-free calling. Features Bluetooth 5.3, bass adjustment, and LED spectrum.