1. Introduction
Thank you for choosing the SHEHDS 200W RGB LED Wash Strobe Light. This versatile stage lighting fixture is designed to create dynamic and vibrant lighting effects for various events. It features RGB color mixing, wash, strobe, and blinder effects, and supports multiple control modes for flexible operation. Please read this manual thoroughly before use to ensure safe and optimal performance.
Image 1.1: The SHEHDS 200W RGB LED Wash Strobe Light, showcasing its LED array.
2. What's in the Box
Carefully unpack your SHEHDS 200W RGB LED Wash Strobe Light and check that all items are present and in good condition. If any items are missing or damaged, please contact your retailer.
- 1 x SHEHDS 200W RGB LED Wash Strobe Light Unit
- 1 x 1.2 Meter DMX Cable
- 1 x 1 Meter Power Cable
- 1 x User Manual (this document)
Image 2.1: Contents of the SHEHDS 200W RGB LED Wash Strobe Light package.
3. Setup
Before connecting the device, ensure the power supply matches the voltage requirements of the light. Always connect the power last.
- Mounting: Use the integrated bracket for secure mounting. The light can be mounted on a truss, stand, or placed on a flat surface. Ensure the mounting location is stable and can support the weight of the fixture.
- Power Connection: Connect the provided 1-meter power cable to the 'Power In' port on the back of the unit. Plug the other end into a suitable power outlet.
- DMX Connection (Optional): For DMX control, connect a DMX controller to the 'DMX In' port using the provided 1.2-meter DMX cable. If linking multiple units, connect the 'DMX Out' of the first unit to the 'DMX In' of the next, and so on.
- Initial Power On: Once all connections are secure, power on the unit. The LED display on the back will illuminate.
Image 3.1: Rear panel connections and controls.
4. Operating Instructions
The SHEHDS 200W RGB LED Wash Strobe Light offers various operating modes. Use the LED display and control buttons (Menu, Up, Down, Enter) on the back of the unit to navigate and select modes.
4.1 Control Modes
- Self-propelled Mode: The light operates automatically through pre-programmed sequences and effects.
- DMX512 Mode: Allows external control via a DMX controller. The unit supports 3, 9, or 24 DMX channels, providing extensive control over color, intensity, and effects. Refer to the DMX channel chart in the full user manual for detailed information.
- Master-slave Effect: Link multiple units together. Set one unit as the 'Master' and others as 'Slave' units. Slave units will mirror the Master's operation.
4.2 Lighting Effects
The fixture provides a range of effects:
- RGB Color Mixing: Utilizes 960 SMD 5050 RGB LEDs to create a wide spectrum of colors and mixed light combinations.
- Wash Effect: Provides broad, even illumination across a surface.
- Strobe Effect: Produces rapid flashes of light. The strobe frequency is adjustable from 1 to 30 Hz.
- Blinder Effect: Creates a powerful, intense burst of light, often used for dramatic impact.
- Linear Dimming: Features 32-bit 0-100% linear dimming for smooth intensity control.
Image 4.1: Demonstration of RGB color mixing capabilities.
Image 4.2: Various dynamic flow and strobe effects.
Image 4.3: Examples of the light's effects in a stage setting.
4.3 Official Product Video
Video 4.4: An official product video demonstrating the SHEHDS 200W RGB LED Wash Strobe Light's various lighting effects and capabilities.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your light.
- Cleaning: Periodically clean the exterior of the fixture with a soft, dry cloth. Ensure the light is powered off and disconnected from the power source before cleaning.
- Cooling Fan: The built-in cooling fan efficiently dissipates heat. Ensure the fan vents are clear of obstructions to maintain proper airflow.
- Inspection: Regularly inspect power and DMX cables for any signs of wear or damage. Replace damaged cables immediately.
6. Troubleshooting
If you encounter issues with your SHEHDS 200W RGB LED Wash Strobe Light, refer to the following common solutions:
- No Power: Check the power cable connection at both the fixture and the power outlet. Ensure the outlet is functional.
- No Light Output: Verify the selected operating mode. In DMX mode, ensure the DMX signal is present and the DMX address is correctly set.
- Incorrect DMX Control: Confirm the DMX address and channel mode (3/9/24 channels) are correctly configured on both the fixture and the DMX controller.
- Overheating: Ensure the cooling fan vents are not blocked and the fixture has adequate ventilation.
For persistent issues, please contact SHEHDS customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | 200WStrRGB |
| Light Source | 960 SMD 5050 RGB LED |
| Light Source Wattage | 200 Watts |
| Color | RGB 3in1 |
| Effects | Wash, Strobe, Blinder, Dynamic Strobe |
| Dimming | 32-bit 0-100% Linear Dimming |
| Control Modes | Self-propelled, DMX512 (3/9/24 Channels), Master-slave |
| Power Source | Corded Electric |
| Material | Metal Housing (Cast Aluminum Shade) |
| Dimensions (L x W x H) | 15" x 8" x 3" (approx. 38.1cm x 20.3cm x 7.6cm) |
| Item Weight | 3.49 Kilograms |
| Mounting Type | Bracket Mount |
| Certifications | CE, ROHS, UL, FCC, EAC, SAA |
Image 7.1: Product dimensions and weight.
8. Warranty & Support
The SHEHDS 200W RGB LED Wash Strobe Light comes with a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For technical support, warranty claims, or any questions regarding your product, please contact SHEHDS customer service through your retailer or the official SHEHDS website. Please have your purchase receipt and model number (200WStrRGB) available when contacting support.