SOCCSO Pet Hair Remover Instruction Manual

1. Introduction

Thank you for choosing the SOCCSO Pet Hair Remover. This manual provides essential information for the safe and effective use of your new pet hair removal tools. Please read it thoroughly before first use and retain it for future reference.

This set includes two distinct tools designed for various fabric types:

• Copper Head Pet Hair Remover: Ideal for heavy-duty and thick-piled items.
• Plastic Fabric Shaver: Suitable for soft and thin fabrics.

2. Safety Instructions

• Always test the tool on an inconspicuous area of the fabric first to ensure compatibility and prevent damage.
• Do not use the copper head tool on delicate, loosely woven, or knitted fabrics to avoid snagging or pulling.
• Keep out of reach of children and pets.
• Use gentle pressure, especially on softer materials. Excessive force may damage fabrics.
• This product is for fabric cleaning only. Do not use on skin or directly on pets.

3. Product Components

The SOCCSO Pet Hair Remover set includes the following:

1. Copper Head Pet Hair Remover: Features a durable metal frame with a brass-like coiled head and a plastic handle. Designed for robust cleaning.
2. Plastic Fabric Shaver: Features a plastic body with a double-row comb on one side and a flat edge on the other. Designed for gentle lint and fuzz removal.

Image 1: The SOCCSO Pet Hair Remover set, showing both the copper head tool and the plastic fabric shaver.

Image 2: Detailed view of the copper head pet hair remover, highlighting its ergonomic handle and reinforced brass-like brush head.

Image 3: Detailed view of the plastic fabric shaver, illustrating its double row comb for fine hairs and flat edge for general use.

4. Setup

No assembly or batteries are required for these manual pet hair removers. They are ready for immediate use upon unboxing.

5. Operating Instructions

Always ensure the fabric is dry before use. For best results, hold the fabric taut with one hand while using the tool with the other.

5.1. Using the Copper Head Pet Hair Remover (for Heavy-Duty Fabrics)

This tool is designed for robust materials where pet hair is deeply embedded. Recommended for:

• Carpets and Rugs
• Couches and Furniture (thick-piled)
• Pet Beds and Cat Trees
• Car Interiors and Upholstery
• Winter Coats and Blankets (non-delicate)

Instructions:

1. Place the copper head tool on the fabric at a slight angle.
2. Apply moderate, even pressure and pull the tool across the surface in one direction.
3. Observe the pet hair and lint gathering in front of the tool.
4. Repeat the motion until the desired area is clean.
5. Collect the accumulated hair and dispose of it.

Image 4: Demonstrating the copper head tool effectively removing pet hair from a carpeted surface.

Image 5: The copper head tool in action on a couch cushion, collecting embedded pet hair.

5.2. Using the Plastic Fabric Shaver (for Soft & Thin Fabrics)

This tool is designed for more delicate materials to remove pills, fuzz, and fine lint without causing damage. Recommended for:

• Upholstery and Ottoman fabrics
• Velvet and Bed Sheets
• Sweatshirts and Jackets
• Other soft, thin, or loosely woven fabrics (use with caution)

Instructions:

1. Choose the appropriate side: the double-row comb for general lint or the flat edge for smoother surfaces.
2. Gently glide the plastic shaver across the fabric surface.
3. Use light, even strokes to lift and remove lint and pills.
4. Avoid excessive pressure or repetitive motions in one spot to prevent fabric damage.
5. Clean the collected debris from the shaver as needed.

Image 6: The plastic fabric shaver being used on a soft fabric, demonstrating its gentle lint removal capabilities.

6. Maintenance

To ensure the longevity and effectiveness of your pet hair removers:

• After each use, manually pull off any accumulated hair, lint, or debris from both tools.
• For stubborn residue, a soft brush or damp cloth can be used to clean the tool heads.
• Store the tools in a dry place to prevent rust on the metal components.
• No special cleaning solutions are required.

7. Troubleshooting

7.1. Tool not picking up hair effectively:

• Ensure the fabric is dry. Damp fabrics may reduce effectiveness.
• Increase pressure slightly for the copper head tool on thick fabrics.
• Check if the tool head is clogged with debris and clean it thoroughly.
• Verify you are using the correct tool for the fabric type (e.g., copper for heavy-duty, plastic for delicate).

7.2. Fabric appears damaged or snagged:

• Immediately stop use.
• You may be using the copper head tool on a delicate or inappropriate fabric. Switch to the plastic shaver or discontinue use on that material.
• Reduce pressure and use lighter strokes.

8. Specifications

9. Warranty and Support

For any questions, concerns, or support regarding your SOCCSO Pet Hair Remover, please refer to the retailer's return policy or contact SOCCSO customer service through the official channels provided at the point of purchase.