NEWONE 18V MAX MATRIX 12-Tool Set Power Tool Combo Kit

Introduction

This instruction manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your NEWONE 18V MAX MATRIX 12-Tool Set. This versatile cordless power tool system is designed to provide omnipotent power for construction, repair, recovery, and maintenance tasks. Please read this manual thoroughly before initial use and retain it for future reference.

Image: The complete NEWONE 18V MAX MATRIX 12-Tool Set, featuring the main drill unit and various interchangeable attachments, along with batteries and charger.

Safety Information

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury when using power tools. Keep your work area clean and well-lit. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep children and bystanders away while operating a power tool. Use appropriate personal protective equipment (PPE) such as safety glasses, hearing protection, and gloves.

• Ensure the tool is switched off before making any adjustments, changing accessories, or storing tools.
• Use the correct tool for your application. Do not force the tool.
• Maintain tools with care. Keep cutting tools sharp and clean.
• Store idle tools out of reach of children and untrained persons.
• Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation.

Package Contents

Your NEWONE 18V MAX MATRIX 12-Tool Set includes the following components:

• 1 x Screwdriver Attachment
• 1 x Wrench Attachment
• 1 x Drill Attachment (main unit)
• 1 x Impact Drill Attachment
• 1 x Oscillating Tool Attachment
• 1 x Reciprocating Saw Attachment
• 1 x Jigsaw Attachment
• 1 x 4" Chainsaw Attachment
• 1 x Sander Attachment
• 1 x Circular Saw Attachment
• 1 x Grass Mover Attachment
• 1 x Hedge Trimmer Attachment
• 2 x 2Ah Lithium-Ion Batteries
• 1 x Battery Charger

Image: Another variant of the NEWONE 12-Tool Set, demonstrating the modular design and various attachments.

Setup

1. Charging the Battery

Before first use, fully charge both 2Ah Lithium-Ion batteries. Connect the charger to a standard power outlet. Insert the battery into the charger. The indicator light on the charger will show the charging status. A full charge typically takes approximately 60 minutes per battery. Do not overcharge the batteries.

2. Attaching and Detaching Heads

The NEWONE MATRIX system features a patented quick lock/release button for easy and secure attachment changes. To attach a head:

1. Ensure the main drill unit is powered off and the battery is removed for safety.
2. Align the desired attachment head with the main drill unit.
3. Push the attachment head firmly onto the main unit until you hear a click, indicating it is securely locked.

To detach a head:

1. Ensure the main drill unit is powered off and the battery is removed.
2. Press and hold the quick lock/release button located on the main unit.
3. Gently pull the attachment head away from the main unit.

Operating Instructions

This section provides guidance on using the various attachments included in your NEWONE 12-Tool Set. Always ensure the correct attachment is securely fastened and the battery is fully charged before operation.

1. Drill Attachment (Main Unit)

The main unit functions as a powerful drill/driver. It features variable speed control and a clutch setting for different applications. Use for drilling holes in wood, plastic, and light metals, or for driving screws.

• Speed Control: Adjust the trigger pressure for variable speed.
• Torque Settings: Rotate the collar to select the appropriate torque setting for driving screws, preventing overtightening.
• Drill Mode: Set the collar to the drill icon for drilling applications.

2. Wrench Attachment

The wrench attachment is ideal for tightening and loosening nuts and bolts. Ensure the correct socket size is used for the fastener.

• Attach the appropriate socket to the wrench head.
• Place the socket over the fastener and activate the tool.

3. Impact Drill Attachment

The impact drill attachment provides additional power for drilling into tougher materials like masonry and concrete. It combines rotary motion with a hammering action.

• Use appropriate masonry drill bits.
• Apply steady pressure and allow the tool to do the work.

4. Oscillating Tool Attachment

This attachment is highly versatile for cutting, sanding, scraping, and grinding in tight spaces. It uses a rapid oscillating motion.

• Select the appropriate blade or accessory for the task (e.g., wood cutting blade, sanding pad).
• Securely fasten the accessory before use.

5. Reciprocating Saw Attachment

Ideal for rough cutting through various materials including wood, metal, and plastic. The blade moves back and forth in a reciprocating motion.

• Choose the correct blade type for the material being cut.
• Ensure the workpiece is securely clamped.

6. Jigsaw Attachment

The jigsaw attachment is used for cutting intricate curves and shapes in wood, plastic, and thin metal. The blade moves up and down.

• Select the appropriate jigsaw blade for the material and desired cut.
• Ensure the base plate is flat against the workpiece during cutting.

7. 4" Chainsaw Attachment

This compact chainsaw attachment is suitable for light pruning and cutting small branches or lumber. Always wear appropriate safety gear.

• Ensure the chain is properly tensioned and lubricated before each use.
• Hold the tool firmly with both hands during operation.

8. Sander Attachment

The sander attachment is used for smoothing surfaces, removing paint, or preparing surfaces for finishing. It typically uses hook-and-loop sanding pads.

• Attach the appropriate grit sanding paper.
• Move the sander evenly across the surface, applying light pressure.

9. Circular Saw Attachment

This attachment is designed for straight cuts in wood and other sheet materials. It provides precise and efficient cutting.

• Ensure the blade is sharp and suitable for the material.
• Adjust the cutting depth and bevel angle as needed.

10. Grass Mover Attachment

The grass mover attachment is used for trimming grass and light weeds in areas where a larger lawnmower cannot reach. Keep clear of debris.

• Wear appropriate eye and leg protection.
• Operate with a sweeping motion, keeping the cutting head away from hard objects.

11. Hedge Trimmer Attachment

This attachment is designed for shaping and trimming hedges and shrubs. Ensure the blades are clean and sharp for optimal performance.

• Inspect the hedge for hidden wires or objects before trimming.
• Use a steady, even motion to achieve desired results.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your NEWONE tool set.

• Cleaning: After each use, wipe down the tool and attachments with a clean, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Blade/Bit Care: Keep all cutting blades and drill bits sharp and free of debris. Replace worn or damaged accessories promptly.
• Battery Storage: Store batteries in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, charge batteries to about 50% capacity.
• General Inspection: Periodically check all screws, nuts, and bolts for tightness. Inspect power cords and plugs for damage.

Troubleshooting

If you encounter issues not listed here, or if solutions do not resolve the problem, please contact customer support.

Specifications

• Brand: NEWONE
• Model: 12-Tool Set Yellow
• Voltage: 18.0V (MAX MATRIX system)
• Battery Type: Lithium Ion
• Battery Capacity: 2Ah (x2 included)
• Item Weight: Approximately 26.4 pounds (total package)
• Package Dimensions: 21.5 x 17.75 x 8.38 inches
• Power Source: Battery Powered
• Included Components: Screwdriver, Wrench, Drill, Impact Drill, Oscillating Tool, Reciprocating Saw, Jigsaw, 4" Chainsaw, Sander, Circular Saw, Grass Mover, Hedge Trimmer attachments, 2 Batteries, 1 Charger.

Warranty and Support

For warranty information, please refer to the warranty card included with your product or visit the official NEWONE website. For technical support, replacement parts, or any inquiries regarding your NEWONE 18V MAX MATRIX 12-Tool Set, please contact NEWONE customer service. Contact details can typically be found on the product packaging or the brand's official website.

Manufacturer: NEWONE (HAOLI TECHNOLOGY CO., LTD)

Online Store: Visit the NEWONE Store on Amazon