1. Introduction
This manual provides instructions for the installation, operation, and maintenance of your LUXRITE A19 LED Light Bulb. This bulb features 5-CCT selectable color temperatures and dimmable functionality, designed for both indoor and outdoor use.
2. Safety Information
- Ensure power is turned off before installation or removal.
- Do not disassemble the bulb.
- Suitable for damp locations.
- Use only with compatible dimmer switches for dimmable models.
- This bulb operates on 120V.
3. Product Features
- 5 Color Tunable (5CCT): Select from 2700K (Warm White), 3000K (Soft White), 3500K (Natural White), 4000K (Cool White), and 5000K (Bright White) using the integrated switch.
- High Brightness: 1600 Lumens, equivalent to a 100W incandescent bulb, using only 15W.
- Dimmable: Compatible with most dimmer switches for adjustable light intensity.
- High Color Rendering Index (CRI90): Provides accurate and vibrant color representation.
- Long Lifespan: Rated for 15,000 hours of operation.
- Damp Location Rated: Suitable for indoor and outdoor use.
- Easy Installation: Standard E26 medium base.
- Shatter Resistant: Durable plastic construction.
Image 1: LUXRITE A19 LED Light Bulbs with 5CCT switch visible.
4. Setup and Installation
- Turn off Power: Before replacing any light bulb, ensure the power to the fixture is turned off at the circuit breaker or wall switch.
- Remove Old Bulb: Carefully unscrew the existing light bulb from the fixture.
- Select Color Temperature: Locate the 5CCT switch on the side of your LUXRITE A19 LED bulb. Before screwing in the bulb, slide the switch to your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K).
Image 2: Demonstrating the 5CCT color temperature selection on the bulb.
- Install New Bulb: Screw the LUXRITE A19 LED bulb into the E26 medium base socket until it is snug. Do not overtighten.
Image 3: Easy installation of the LUXRITE A19 LED bulb into a lamp.
- Restore Power: Turn the power back on at the circuit breaker or wall switch.
5. Operating Instructions
5.1 Color Temperature Selection
The LUXRITE A19 LED bulb allows you to choose from five distinct color temperatures. This selection is made via a small switch located on the side of the bulb.
- 2700K: Warm White, ideal for cozy and relaxing environments.
- 3000K: Soft White, a slightly brighter warm light, suitable for living areas.
- 3500K: Natural White, a balanced white light, good for general purpose.
- 4000K: Cool White, a brighter, more energetic white, suitable for task lighting.
- 5000K: Bright White, a crisp, daylight-like white, best for focused work areas.
To change the color temperature, you must first remove the bulb from the fixture, adjust the switch, and then re-install it.
5.2 Dimmable Functionality
This LED bulb is fully dimmable. When connected to a compatible dimmer switch, you can adjust the light output from 100% brightness down to a low glow.
Image 4: Demonstration of the bulb's dimmable capabilities.
Ensure your dimmer switch is designed for LED bulbs to prevent flickering or damage.
6. Maintenance
The LUXRITE A19 LED Light Bulb is designed for long-term, maintenance-free operation with an average lifespan of 15,000 hours. No regular maintenance is required.
To clean the bulb, ensure the power is off and the bulb is cool. Wipe gently with a dry, soft cloth. Do not use liquid cleaners.
Image 5: The bulb's dimensions and long lifespan are highlighted.
7. Troubleshooting
- Bulb Not Lighting Up:
- Check if the power switch is on.
- Ensure the bulb is screwed in securely.
- Verify that the fixture is receiving power.
- Flickering:
- If using a dimmer, ensure it is compatible with LED bulbs. Incompatible dimmers can cause flickering.
- Ensure the bulb is screwed in tightly.
- Test the bulb in a different fixture to rule out fixture issues.
- Incorrect Color Temperature:
- Turn off power, remove the bulb, and re-adjust the 5CCT switch to your desired setting.
8. Specifications
| Specification | Value |
|---|---|
| Brand | LUXRITE |
| Model Number | LR21479 |
| Light Type | LED |
| Bulb Shape Size | A19 |
| Bulb Base | E26 Medium Base |
| Wattage | 15 Watts |
| Incandescent Equivalent | 100 Watts |
| Brightness | 1600 Lumens |
| Color Temperature | 5CCT Selectable (2700K/3000K/3500K/4000K/5000K) |
| Color Rendering Index (CRI) | 90 |
| Dimmable | Yes |
| Voltage | 120 Volts |
| Beam Angle | 220 Degrees |
| Average Life | 15,000 Hours (approx. 13.7 Years based on 3 hrs/day) |
| Indoor/Outdoor Usage | Indoor, Outdoor (Damp Location Rated) |
| Material | Plastic (Shatter Resistant) |
| Certifications | ETL Listed, Title CA20 Compliant |
| Product Dimensions | 4.65 x 2.36 x 2.36 inches |
| Item Weight | 2.56 ounces |
9. Warranty and Support
This LUXRITE A19 LED Light Bulb is backed by a 2-year warranty.
For technical support, warranty claims, or further assistance, please contact LUXRITE customer service. Refer to the product packaging or the official LUXRITE website for contact details.
Visit the LUXRITE Store on Amazon for more information and products.
