1. Introduction
Thank you for purchasing the Reality Leuchten Jeff R59151131 LED Cordless Table Lamp. This manual provides essential information for the safe and efficient use of your new lamp. Please read these instructions carefully before use and retain them for future reference.
2. Safety Instructions
- Ensure the lamp is placed on a stable, flat surface to prevent tipping.
- Do not expose the lamp to water or excessive moisture. This product is for indoor use only.
- Do not attempt to disassemble or modify the lamp. This may void the warranty and pose a safety risk.
- Keep the lamp away from direct heat sources and flammable materials.
- Use only the provided USB-C cable or a certified equivalent for charging.
- The integrated LED light source is not replaceable.
3. Package Contents
Please check that all items are present in the package:
- 1 x Reality Leuchten Jeff R59151131 LED Cordless Table Lamp
- 1 x USB-C Charging Cable
4. Setup and First Use
- Unpacking: Carefully remove the lamp and all accessories from the packaging.
- Initial Charge: Before first use, fully charge the lamp. Connect the USB-C cable to the charging port located on the base of the lamp and plug the other end into a suitable USB power adapter (not included). The charging time is approximately 6 to 8 hours.
5. Operating Instructions
The Jeff table lamp features a touch-sensitive control for power and brightness adjustment.
- Power On/Off: Lightly touch the sensor button on the lamp's base to turn the lamp on or off.
- Brightness Adjustment: With the lamp on, repeatedly touch the sensor button to cycle through three different brightness levels. The lamp will remember the last brightness setting when turned off and on again.
6. Charging the Battery
The integrated battery provides cordless operation. When fully charged, the lamp can operate for approximately 4 hours at maximum brightness.
- Connect the USB-C cable to the lamp's charging port and a USB power source.
- A charging indicator (if present, refer to product for specific behavior) will typically show charging status.
- Charging takes approximately 6 to 8 hours for a full charge.
- Disconnect the cable once charging is complete.
7. Maintenance
- Cleaning: Disconnect the lamp from any power source before cleaning. Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: If storing the lamp for an extended period, ensure it is fully charged and store it in a cool, dry place. Recharge every 3-6 months to maintain battery health.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Battery is depleted. | Charge the lamp for 6-8 hours. |
| Lamp does not charge. | USB-C cable or power adapter is faulty. | Try a different USB-C cable or power adapter. Ensure connections are secure. |
| Light is dim or flickers. | Low battery. | Recharge the lamp. |
| Touch control is unresponsive. | Surface is wet or dirty; temporary electronic glitch. | Ensure the touch sensor is clean and dry. Try turning the lamp off and on again after a few seconds. |
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | R59151131 |
| Brand | RL LIVE YOUR LIGHT |
| Dimensions (D x W x H) | 12.6D x 12.6W x 30H cm |
| Diameter | 12.5 cm |
| Base Material | Metal |
| Finish | Matt |
| Color | White Matt |
| Lamp Type | Integrated LED |
| Light Source Power | 1.5 Watt |
| Color Temperature | 3000 Kelvin (Warm White) |
| Average Lifespan | 30,000 hours |
| Switch Type | Touch Control (3-level dimming) |
| Battery Required | Yes (Integrated) |
| Charging Port | USB-C |
| Charging Time | Approx. 6-8 hours |
| Operating Time (Max Brightness) | Approx. 4 hours |
| Energy Efficiency Class | G |
10. Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.
