1. Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your RL LIVE YOUR LIGHT Davos R81553006 3-Bulb Spotlight Bar. Please read these instructions carefully before proceeding with installation or use, and retain them for future reference.
The Davos spotlight bar features a metal chrome finish with three fabric shades in white and grey. It is designed for use with E14 bulbs, with a recommended maximum of 10 watts per bulb. Bulbs are not included with this product.
2. Safety Instructions
- Always disconnect the power supply at the main fuse box or circuit breaker before installation, maintenance, or bulb replacement.
- Installation should be performed by a qualified electrician if you are unsure about electrical wiring.
- Ensure the mounting surface can support the weight of the fixture.
- Do not exceed the maximum wattage specified for the bulbs (3 x E14 max. 10 watts).
- Keep packaging materials out of reach of children.
- Do not cover the light fixture with any material.
- This product is for indoor use only.
3. Package Contents
Verify that all components are present and undamaged before beginning installation:
- 1 x RL LIVE YOUR LIGHT Davos R81553006 3-Bulb Spotlight Bar (including metal bar, base, and 3 fabric shades)
- Mounting hardware (screws, wall plugs)
- Instruction Manual
Note: Light bulbs (3 x E14) are not included and must be purchased separately.
4. Setup and Installation
Before installation, ensure the power supply is disconnected at the main circuit breaker.
Required Tools (Not Included):
- Screwdriver (Phillips head)
- Drill (if mounting to a new location)
- Pencil
- Wire strippers (if necessary)
Installation Steps:
- Prepare the Mounting Surface: Identify the desired location for the spotlight bar. Ensure there is adequate wiring available and that the surface is suitable for mounting.
- Mark Drilling Points: Hold the mounting bracket of the spotlight bar against the ceiling or wall and mark the positions for drilling holes with a pencil. Refer to the dimension diagram for precise measurements.
- Drill Holes: Drill holes at the marked positions. Insert appropriate wall plugs if mounting into drywall or masonry.
- Connect Wiring: Carefully connect the household electrical wires to the corresponding wires on the spotlight bar. Ensure correct polarity (Live to Live, Neutral to Neutral, Earth to Earth). Secure connections with terminal blocks.
- Mount the Fixture: Secure the spotlight bar's mounting bracket to the ceiling or wall using the provided screws. Ensure it is firmly attached.
- Install Bulbs: Screw three E14 bulbs (max. 10W LED recommended) into the lamp holders. Do not overtighten.
- Adjust Spotlights: The individual spotlights can be adjusted to direct light as desired.
- Restore Power: Once installation is complete and all connections are secure, restore power at the main circuit breaker.
5. Operating Instructions
The RL LIVE YOUR LIGHT Davos R81553006 Spotlight Bar is operated via a standard wall switch connected to your household electrical circuit. There is no integrated switch on the fixture itself.
- Turning On/Off: Use the wall switch to turn the light fixture on or off.
- Adjusting Spotlights: Each individual spotlight head can be manually rotated and tilted to direct the light beam to your desired area.
6. Maintenance
Cleaning:
- Always disconnect power before cleaning.
- Wipe the metal parts with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- For the fabric shades, gently dust with a soft brush or a dry cloth. Avoid using wet cloths or harsh chemicals, which may damage the fabric.
Bulb Replacement:
- Ensure the fixture is turned off and has cooled down completely before attempting to replace bulbs.
- Carefully unscrew the old E14 bulb.
- Screw in a new E14 bulb, ensuring it does not exceed the maximum wattage of 10 watts. LED bulbs are recommended for energy efficiency.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Bulb is faulty or not properly installed. Loose wiring connection. | Check circuit breaker/fuse. Replace bulb or ensure it is screwed in correctly. Verify all wiring connections are secure (ensure power is off first). |
| Light flickers. | Loose bulb. Incompatible bulb type. Faulty wiring. | Tighten bulb. Ensure bulb is compatible (E14, max 10W). Check wiring connections (ensure power is off first). If problem persists, consult a qualified electrician. |
| Shades appear discolored or damaged. | Exposure to harsh chemicals or excessive moisture. | Clean only with a dry, soft cloth. Avoid harsh cleaners. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | R81553006 |
| Product Dimensions | 16.5D x 58W x 23H centimeters (16.5 x 58 x 23 cm) |
| Item Weight | 0.95 Kilograms |
| Style | Spotlight bar 3 bulbs |
| Base Material | Metal |
| Finish Type | Polished, textured |
| Shade Material | Fabric |
| Shade Colour | White / Grey |
| Bulb Base | E14 |
| Recommended Wattage | Max. 10 watts per bulb |
| Lamp Type | LED lamp (recommended) |
| Switch Type | Wall Switch (external) |
| Batteries Required | No |
9. Warranty and Support
For information regarding warranty coverage or technical support, please refer to the documentation provided at the point of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.
