Introduction
Thank you for choosing the Golpart Over Washer and Dryer Shelves. This multi-functional storage solution is designed to maximize space in your laundry room, providing robust storage for essentials and a convenient area for drying clothes. With adjustable shelves and a durable construction, this unit offers both versatility and stability. Please read this manual carefully before assembly and use to ensure proper installation and long-lasting performance.
Figure 1: Golpart Over Washer and Dryer Shelves in use.
Safety Information
- Ensure all components are present and undamaged before assembly.
- Do not exceed the maximum weight capacity of 100 lbs per shelf and 80 lbs for the hanging rod.
- Always use the included anti-tip device to secure the unit to the wall for stability and safety.
- Assemble the unit on a flat, stable surface.
- Keep small parts away from children during assembly.
- Regularly check all connections to ensure they remain tight.
Package Contents
Please verify that all the following components are included in your package:
- 2 Tier Wire Shelves
- 1 Hanging Rod
- 2 Hooks
- Vertical Support Poles
- Plastic Clips
- Leveling Feet
- Anti-tip Device (Wall Anchor)
- Assembly Hardware (Screws, etc.)
- Instruction Manual
Setup and Assembly
Follow these steps for proper assembly of your Golpart shelving unit. It is recommended to assemble the unit in its intended location to account for any pipes or cables.
- Measure Your Space: Before assembly, measure the width of your washer and dryer. The unit is designed for appliances up to 27 inches in width. The overall dimensions are 13.5”D x 29.5”W x 72”H.
- Install Plastic Clips: Attach the plastic clips to the vertical support poles at the desired height for your first shelf. Ensure the flange fits into the groove and follow the arrow directions (upwards) on the plastic clip. The structural design includes a small gap between clips, which is normal and ensures the shelf is firmly anchored.
- Assemble Wire Shelves: Slide the wire shelves down slowly onto the poles until the 4 sleeves fit snugly onto the plastic clips. The end with a notch should face downward.
- Adjust Shelf Height: The wire shelves can be adjusted up and down to accommodate different washing machine types and storage needs. Simply reposition the plastic clips and slide the shelves into place.
- Attach Hanging Rod and Hooks: Secure the hanging rod to the designated points on the upper section of the unit. Attach the two rotatable hooks to the side of the unit for hanging light clothing, towels, or cleaning supplies.
- Adjust Stability: Use the leveling feet at the bottom of the poles to adapt the unit to uneven ground, ensuring a stable foundation.
- Wall Fixation: For enhanced stability and safety, use the included wall anchor to securely fix the clothes rack to the wall.
Figure 2: Assembly steps for plastic clips and shelves.
Figure 3: Features including adjustable shelf height, rotatable hooks, and adjustable leveling feet.
Figure 4: Adjustable shelf height for various washing machine sizes.
Operating Instructions
The Golpart Over Washer and Dryer Shelves are designed for versatile use in your laundry room or other areas requiring organized storage.
- Shelf Usage: Utilize the two wire shelves for storing laundry detergents, fabric softeners, folded linens, baskets, or other household items. Each shelf can hold up to 100 lbs.
- Hanging Rod: The integrated hanging rod is ideal for air-drying clothes, hanging garments directly from the dryer, or organizing items on hangers. It supports up to 80 lbs.
- Hooks: The two included hooks provide additional hanging space for smaller items such as brushes, towels, or accessories.
- Adjustability: Should your storage needs change or if you acquire a different size washer/dryer, easily adjust the height of the shelves by re-positioning the plastic clips on the vertical poles.
Figure 5: Example of two shelving units providing ample storage.
Maintenance
To ensure the longevity and optimal performance of your Golpart shelving unit, follow these simple maintenance guidelines:
- Cleaning: Wipe down the metal surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the protective coating.
- Inspection: Periodically check all connections, screws, and plastic clips to ensure they are secure. Tighten any loose parts as needed.
- Protection: The shelves are specially coated to protect against humidity damage, rust, and corrosion. While durable, avoid prolonged exposure to excessive moisture.
- Leveling: Re-adjust the leveling feet if the unit becomes unstable due to floor settling or movement.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit is wobbly or unstable. | Uneven floor; loose connections; unit not secured to wall. | Adjust leveling feet until stable. Check and tighten all plastic clips and connections. Ensure the anti-tip device is properly installed and secured to the wall. |
| Washer/dryer knocks into the unit. | Unit is too close to the appliance; appliance vibrates excessively. | Ensure the unit is centered and has adequate clearance around the appliance. Verify appliance is level and not vibrating excessively. Consider adjusting shelf height if the top of the appliance is hitting a shelf. |
| Clothes on hanging rod touch the appliance or floor. | Hanging rod is too low; clothes are too long for current setup. | Adjust the height of the shelf supporting the hanging rod upwards. For very long garments, consider folding them or using alternative drying methods. |
| Difficulty installing plastic clips or shelves. | Clips not aligned correctly; not enough force applied. | Ensure the flange of the plastic clip is fully seated in the pole's groove. Apply firm, even pressure when sliding shelves down onto clips. Refer to assembly diagrams. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | EA_305B |
| Material | Metal |
| Color | Black (2-Tier) |
| Product Dimensions (D x W x H) | 13.5"D x 29.5"W x 72"H |
| Shelf Type | Over Washer and Dryer Shelves |
| Number of Shelves | 2 |
| Shelf Weight Capacity | 100 lbs per shelf (Total 320 lbs for unit) |
| Hanging Rod Capacity | 80 lbs |
| Special Features | Space Saving, Heavy Duty, Adjustable, Portable, Rust Resistant |
| Mounting Type | Floor Mount (with wall fixation option) |
| Assembly Required | Yes |
| Item Weight | 15 Pounds |
Warranty and Support
Golpart stands behind the quality of its products. For any warranty claims, technical support, or inquiries regarding your Over Washer and Dryer Shelves, please contact Golpart customer service. Refer to the contact information provided with your purchase or visit the official Golpart website for assistance.
Contact Information: Please refer to your product packaging or the Golpart official website for the most up-to-date contact details.
Online Resources: For additional information, FAQs, or product registration, visit the Golpart Store on Amazon.
